Resume - I am full confident about the any job of analyzer/instrumenation for detail see ...

Misco Jobs

Resume #54783

CONTACT INFORMATION:
View contact information...

Naveed Akhtar

Objective:
To find a challenging job in a challenging environment to show my capabilities

Academic Qualification

1:- Metric with Science (SSC) from (high school)
2:- DAE (Three years Diploma of Associate Engineer in Instrumentation) from (Government Ploy technique institute

Working experience (08 ~ 09 Years)

1. Jubail United Petrochemical Company (SABIC) Kingdom of Saudi Arabia

Duration: From April 07, 2004 to December 03, 2005.

Ethylene Plant
Worked on DCS during the project phase and performed following responsibilities
ƒæ Complete interlock testing
ƒæ Fault diagnosis on both software and hardware.
ƒæ Modifications
ƒæ Graphic designing and modifications
ƒæ New loop assignments.
ƒæ Complete loop checking.
ƒæ Commissioning and start up support
ƒæ Modification on safety shut down system (Triconex TS1131)

EO/EG (Ethylene Oxide and Ethylene Glycol Plant)
During the plant erection and commission I was responsible of following activities as a QA & QC inspector to take over the charge from client Flour Arabia Ltd. and Toyo Company.
ƒæ Verification of the plant instrument Installation
ƒæ Provided the witness for Instrument loop check verification
ƒæ Provide witness for Interlock function test verification
ƒæ Verification of the all Quality verification documents
ƒæ Plant start up activities.
ƒæ After start up did the instrument maintenance activities

2. AL-Bayroni Fertilizer & Petrochemical Company (SABIC) Kingdom of Saudi Arabia

Duration: From December 04, 2005 ~ April 20, 2006.

I did the following job responsibilities during the services of Al-Bayroni Fertilizer company
ƒæ Independently I handled the Instrument maintenance activities for Utility, Ammonia, Urea,2-EH (Diethyl Haxonal) Plant
ƒæ Doing the instrument maintenance and preventive maintenance activities.
ƒæ Preparing of the analyzer & instrument maintenance standard calibration procedure and Forms.
ƒæ During the shutdown Independently handled all vibration monitory system for more than 15 compressor
ƒæ Preparing the instrument standard maintenance forms and procedures
ƒæ Handled the breakdown and notification jobs
3. Sadaf Petrochemical Company (SABIC) Kingdom of Saudi Arabia ( shared with shell)
Duration: April 22, 2006 ~ till date
Recently I am doing the job in instrument analyzer department
ƒæ Doing the Preventive maintenance activities
ƒæ Doing the breakdown and notification job as per the demand of operation department
ƒæ Trouble shooting and diagnosing the fault.
ƒæ New installation commissioning and calibration of the instrument analyzers
ƒæ Did the modification for process online analyzers
ƒæ To check the job activities from the SAP(System Application Procedure) and maintainging the record in SAP
ƒæ Ordering and reordering the material thru SAP Software as per requirement of plants jobs

Position Held: Analyzer Tech.

4. United engineering Constructor ( Sole Vendor Of Yokogawa,Valtek,Klay,Kajani,Ashrocft & BTG Instruments)

Duration: From November 01, 2001 ~ April 04, 2004

ƒæ Independently handled the complete project erection commissioning of (CHEMI VISCO FIBER) Plant.
ƒæ Provide the services to clients and satisfied the customer requirement
ƒæ Hand on experience for sales of all kinds of field and control instruments for above all Manufacturers especially ¡* YOKOGAWA¡¨.
ƒæ Making the technical evaluation and proposal based on customer requirements
ƒæ Preparation of Quotation according to specifications of customer requirements.
ƒæ To satisfy the customer based on there technical requirements

Position Held: Assistant Instrument Engineer

Job Description

General Field Instrumentation

ƒæ Installation & commissioning of various type of transmitters, Magnetic flowmeters, Vortex Flowmeter, Pressure Switches, Control valves, Displacer Type level Transmitter Corioles Mass flowmeter, Ultrasonic type level and flow transmitters
ƒæ Installation, commissioning and calibration of various kind of control valves.
ƒæ I am confident of installation and calibration of machine monitoring system like vibration monitoring system of Bently Nevada 7200, 3300 and 3500 system.(axial, thrust and speed measurement).
ƒæ Worked on almost complete product of Yokogawa field instruments
ƒæ Complete overhauling and calibration of the Valtek Control valves and its accessories.
ƒæ Hand on experience of calibration of instruments for different manufacture like Yokogawa, Rosemount, Valtek, Honeywell,
ƒæ Testing Calibration, Servicing of various field instruments such as transmitters, Switches, Control Valves, etc.
ƒæ Worked on BTG and KAJAANI products related to PULP AND PAPER industries instrumentation

Instrument / Analyzer Technician
A brief summary about my experience is given below for your quick review:

ƒæ I have got though knowledge in the field of various types and different makes of on-line Analyzers
ƒæ Working experience in chemicals, Fertilizer and Petrochemical company
ƒæ Regular maintenance, trouble shooting, installation, preventive maintenance.
ƒæ Identifying the cause of problems using related logics diagrams
ƒæ Preparations of preventive maintenance schedules, developing standard operating procedures.
ƒæ Ordering and re-ordering necessary spares.

Analyzers Handled:
ƒæ Gas Chromatographs
ABB vista (3100) for H2, C3H8, C3H6 & CO.
ƒæ Infrared analyzers for CO, CO2 & CH4
Model URAS 14. Make H & B ( HARTMAN & BRAUN )
ƒæ Oxygen analyzers
Model Thermox WDG III & IV (Ametek )
ƒæ Paramagnetic oxygen analyzer
Model OXYNOS 100 Make Fisher Rosemount
ƒæ pH analyzer
1. Model No. PH400G, & PH402G YOKOGAWA)
2. Model No.54PH & 54 e PH ) Rosemount
ƒæ Conductivity analyzers
1. Model 54C, 54ec, 1054BC & SOLU) and 3081C remote type conductivity analyzer (Rosemount)
2. Model 871 series Make FOXBORO.
ƒæ SOX, NOX & CO analyzer
Continuous emission Monitoring Systems (CEMS)- Model ULTRAMATE 6E Make Siemens.
ƒæ CO analyzer
Model 3501 multi wave photometric detector. MAKE ABB
ƒæ Hydrogen analyzer
Model 7C, Make BECKMAN
ƒæ NH3 Gas detector
Model 6803330 Make DRAGGER.
ƒæ CO Analyzer
Model 6807306 Make DRAGGER & POLYTRON.
ƒæ LEL Detector & Control Monitor
1. System Model No. 610-N4X (Detcon-USA)
2. System Model No. 5300 Monitor (MSA)
ƒæ Chlorine Detector
1. Model: ULTIMA
2. Model: DC6-XX (Detcon)
ƒæ Oxygen & LEL Detector
Model: MSA 260 & (MSA)
ƒæ Hydrogen Analyzer
1. Model Caldos 5G (Hartmann & Braun)
2. Model Caldos 5 Advance optima (Hartmann & Braun)
Application: Chlorine
ƒæ GC Applied Automation Incorporated
Optichrom _ Advance chromatograph
Model No. 1731132224
ƒæ Trace Moisture Analyzer
1. Model No. 304 MCA (Ametek-USA)
2. Model No. 340 (Ametek-USA)
Application: Chlorine
ƒæ Moisture Analyzer
Series 1 (Panametric)
ƒæ Oxygen Analyzer (Paramagnetic)
Model: 1100 & 1900 (Servomex UK)

ƒæ pH Analyzer
1. Model No.PH 5081-P-HT (Rosemount)
2. Model No. TB82 (ABB)
3. Model TBI - Bailey
ƒæ Chlorine Analyzer (Liquid Analyzer)
Make: Teledyne
Application: EDC (Ethylene Dichloride)
ƒæ Trace Moisture Analyzer (Photometric
Model No. 514-0-20 (Teledyne)
Application: EDC Vent
ƒæ Trace Moisture Analyzer (IR)
Model: 3501 & 3401 Vista (ABB)
Application: Freon & Chlorine
ƒæ Ethylene Analyzer (IR)
Model: ULTRAMATE 5F (Seimenes)
ƒæ Density Analyzer
Model NO. SmartPro (OHMART-USA)
ƒæ Conductivity Analyzer (Remote Controlled)
Model No. F06-40864 (Rosemount)
ƒæ CO Analyzer NDIR With PLC Direct 205 Logic
Model: UTRAMATE 6 (Siemense)
PLC Model Direct 205 logic (Automation Direct KOYO)
Indicator Model: EZ-S6M-R(USA)
ƒæ Sodium Sulfite Analyzer
Model: Pump colorimeter Analyzer (HACH-USA)
ƒæ Dissolved Oxygen Analyzer
Model NO. 54e (Rosemount)
ƒæ TFC (Total Free Chlorine) Analyzer
Model No. 1054A (Rosemount)
ƒæ Hardness Analyzer (Ca+mg) Colorimeter
Model No. FPA800 Series (Titronic USA)
ƒæ Caustic Carbonate Analyzer Colorimeter
Model No. FPA300 Series (Titronic)
ƒæ Turbidity Analyzer with Moniturb Sensor
Make: Monitek (USA)
ƒæ Conductivity Analyzer TBI Bailey
Type TOROIDAL

Vibration Monitoring System

I am full confident of installation, Linearity Check and calibration of machine monitoring system
(Vibration monitoring system) of Bently Nevada 7200, 3300 and 3500 system.(axial, thrust and speed measurement).

Distributed control system

I have hand on experience of following related job of Hardware & software for Yokogawa DCS CS 3000 FIO System.
ƒæ Yokogawa Exa Quantum. Strong Knowledge about Exaquantum Historian and SER, used to collect history of running process
ƒæ OPC Server. Strong Knowledge about OPC Software that provides the communication between Yokogawa DCS and other OPC servers like Matricon OPC server or Bently Nevada.
ƒæ Hand of experience of software installation, software implementation, Fault diagnosis on both software and hardware. Modification, graphic designing, new loop assignments complete loop checking.

Triconex ESD System Model TS1131

ƒæ Complete knowledge about Designing of Logic, operating system of Triconex, Hardware assignment software implementation, I/O Assignment,

AMS (Fisher Rosemount)
ƒæ Hand on knowledge about Fisher Rosemount AMS software used for communication between AMS HART Protocol and all device of the field those having a option of HART Protocol using MUX devices

Programmable Logic Control Systems. Model: MELSEC FX1N (MITSUBISHI)

ƒæ Did The Complete Project of Auto Clave System On Habib Sugar Mills.
ƒæ Ladder logic designing, Graphic Designing with I/O's Assignment, Implementation of this project. Communication between PLC and GOT Terminal

Reference: On demand

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3501 to 3550 of 6391)

Go to Search Parameters...

Brief Description

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

With a Hons. Diploma in Civil Engineering, I have totally 13 years of experience , 6 years experience in Large Engineering/Construction, oil & gas & Process Plants related industry and Post Diploma in Computer Application

Dear sir, I would like to submit my application form for the post of the petroleum engineer. Here is my Cv attached below. If you want to know other information or document, please let me know.

Geologist looking for employment in the Oil Industry

Oil and Gas Piping and Ppeline Designer And Expert in all Drawings and Design Related to Pipeline

More than five (5) years working experience in Non-Destructive Testing and Engineering Inspections for Onshore / Offshore and refineries industries. Worked with varios major client e.g Petronas Carigali Sdn. Bhd, Petronas Gas Berhad, Optimal Chemicals (M) Sdn. Bhd, Exxon Mobil Exploration And Produ

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

Shaped Charge Engineer

Flow Assurance Engineer

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Petroleum engineering with reservoir engineering & field development experience

Knowledge of fire protection systems and maintaining the safety audit system

Bachelor degree in Petroleum and Natural Gas Engineering May – 2007.

GOOD APTITUDE,COMMUNICATION SKILLS,MANAGING SKILLS,TECHNICAL SKILLS

Piping Engg. skills including

Becholar in chemical Engineering (production / project)

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Mechanical piping supervisor

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Autocad & Inventor Draftsman

A Drilling Engineer with expertise in drilling rig supervision, development of drilling, work-over and abandonment procedures. Excellent interpersonal skills combined with the ability to work collaboratively with other team members have been my formidable strengths.

B.E. Petroleum, Working in Workover Department

Diploma In Instrumentation Engineering In Aug 1988 (3 Years Duration) +Amie Eqvt To B.E

DCS Engineer With Yokogawa CS3000 experience

An effective engineer possessing good communication skills, combined with proven technical and organizational abilities. Education, qualifications and experience gained through significant design applications and management positions performed in the US and the Middle East.

Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.

Electrical and Electronic background. Experience with ESPs, Completions and Production Engineering

Well Service Supervisor or Coil Tubing Supervisor

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

Obtained Greenbelt Certification from DaimlerChrysler and Black Belt Steering Committee for solving a complex rear door window noise issue on Dodge Durango by using Shainin methodology.

GIS-Geophysicist/Databse Administrator

During 13 years I was working at rig site on many different wells. I know very well Rig equipment, Drilling tehnology, Mud properties, Fishing, Coring. In many situation I solved stuck, kick and lost circulation problems.

I am a Geophysicist with seven years experience in Petroleum Exploration. Extensive experience working with multidisciplinary teams on exploration, interpretation and prospect generation.Experienced geophysics workstation user.Excellent computer skills and good knowledge of technical software.

I am experienced cased hole engineer

Mechanical engineer looking for job in mechanical field

Diploma in Mechanical Engineeering, Diploma in Materials Management and Diploma in Exports & Imports. Working in a Multinational Company M/s. Chemtex Consulting of India Pvt. Ltd, India Since Apil’ 2004 as Procurement Engineer

Certified Chemical engineer with Masters Degree

P&ID design draftsman. Very good experience in PDS2D, AutoCAD, AutoPLANT, Smartsketch, Microstation, I/RAS B, AutoLisp, AutoCAD VBA, Scripts etc.

I am M.Tech. in Applied Geophysics from IIT Roorkee. I am working for an OIL COMPANY as a Logging Engineer.

I have about 18 years of experience in operation of various Chemical plants, oil refineries and oil and gas gathering stations in India and Arabian Gulf Onshore and Offshore. I am also having experience of operation on Modern DCS belonging to Honey Well TDC 3000 of USA, Centum of YOKO GAWA (YE

MSc. Geology with a PGDiploma in GIS and completed a PGDiploma in Petroleum Exploration. 6 months exp.as Trainee Mud Logger.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 [ 71 ] 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out