Resume - To seek holistic and enriching exposure in the field of technology and managemen...

Misco Jobs

Resume #54918

CONTACT INFORMATION:
View contact information...

Profile: -
Mechanical Engineering Diploma with and Experience of Ten Years in AutoCAD Designing and Preparing Drawing for Offshore Drilling Rig's, Turrets, FPSO Process Module's and Buoy, Petrochemical Refinery Structure's, Pressure Vessel, LPG Terminal Plants.

Qualification: -
Diploma in Engineering: Hyderabad Karnataka Education Society Polytechnic 1996,
Karnataka.

Emphasis: Mechanical Engineering
(After 10 + 2)

Percentage of Marks: 58.6 % Higher Second Class

Computer Exposure: AutoCAD 2005, Auto Lisp Programming for Structural, WindowsXP Professional, Os, Adequate Internet skills.

Professional Experience: (Total Ten Years)

(A) Organization (Current): LAMPRELL ENERGY LTD. (Sharjah, Main Branch).

Period: 1st July 2004 to till date (as permanent).
1st April 2003 to 1st June 2004 (on Contract)

Company profile: Company is working as Marine Contractors. The Company involves in Design, Detailing, Fabrication, Erection, and Refurbishment, Maintenance of Offshore Rigs, Process Modules, Turrets and buoy.

Designation: Steel Structural Designer,

Nature of work: Offshore survey of Rigs, Develop Scope of work in Offshore Survey, Guide Commercial Dept. to price as per Scope. Preparing plan to commence the Engineering, Co-ordination with clients to meet there requirements. Preparing Detailed Structural Plan, Layout & Fabrication drawings. Able to work individually on project.

Current Job in hand: I was involved in one month survey of the Rig Transocean C.K.Rhein Jr. during Tow from SPAIN to UAE (Hamriyah Port). And working as Senior Structural Designer.

(B) Organization (Current): TIGER STEEL ENGINEERING (INDIA) PVT. LTD.

Company profile: Company is Pioneer in Pre-Engineered Building Construction in India and Gulf Country. The Company involves in Design, Detailing & Fabrication, Erection in steel Constructions Shed.

Designation: Steel Structural Draughtsman,

Nature of work: Preparing Detailed Structural Plan Layout & Fabrication drawings,

Period: Sept 2002 to March 2003.

(C) Organization: DEVELOPMENT CONSULATANT
LIMITED. (CONSULATING
ENGINEERS)

Responsibilities: Worked as CAD-Executive and involved in RAJASTAN ATOMIC POWER PROJECT.

Period: Feb. 2002 TO Sept 2002.

Responsibilities: Drawing's of Stated Structure and Site Responsibilities for As Built of Drawings.

(D) Organization: PETRON ENGINEERING CONSTRUCTION LTD.

Company profile: Company is working as Turnkey Contractors of Petrochemical Refinery and Erection Engineering.

Designation: AutoCAD Draftsman,

Nature of work: Preparing Detailed Structural Plan Layout & Fabrication drawings,

Period: -: Sept. 1999 to Feb. 2002.

(E) Organization: SPACETECH Equipment's &
Structural Pvt., Ltd.

Company profile: Company is working as Turnkey Contractors of LPG Storage Terminals, LPG Bottling Plants and Manufactures of Pressure Vessels and Road Tankers.

Designation: AutoCAD Draftsman,

Nature of work: Design & Drawing's of Storage Vessel and Road Tanker for LPG, PROPANE, AMMONIA, O2, N2, CO2 Etc, Liquids and Gasses As per IS – 2825, BS – 5500, ASME SEC. VIII – DIV. 1 Code.

: Drawing's of SPHERE & PETAL Development for the Hydrogen gas as per IS – 2825 code.

Period: 13th October 1996 to 11th April 1999.

Responsibilities: Drawing's of Stated Equipment and Worked on Software Package called (HEX-T).

JOB HANDELD

SR.NO DWG.TYPE DESCRIPTION COMPANY
1. Fabrication. Preparing fabrication drawings for pipe drive platform. Accommodation Module, Enigne foundation and mud pump foundation. Hull repair works. ENSCO International Ltd.
Noble International Ltd.
Transocean
Global Santa Fe
Rowan Company
2. Layout Preparing detail framing Plan Elevation, Framing Elevation. Single Buoy Moorings (SBM)
3. Fabrication. Preparing fabrication drawings for Sea fastening for Modules.. Single Buoy Moorings (SBM)
4. Fabrication. Detailed Fab. Drawing of Heater (CDU/VDU) Radiant, Convection Section, Arch, Header Boxes, Radiant and Convection Coils, Cross Overs, Radiant and Convection Tube Sheets, Radiant Arch Ducting, Columns, Vertical Bracing, Horizontal Bracings, Platforms, Gratings, Stairways, Ladders, Etc. AS PER ASME, TEMA, API, IS Chennai Petrochemicals.
(CHENNAI)
B.P.C.L.

5. Structural. Preparing Pre-Engineered Building for various size of shed. Hindustan Lever Ltd. (GOA)
6. Fabrication. Preparing fabrication drawings for conveyor structure. B.R.P.L LTD.
7. Fabrication. Preparing fabrication drawings for critical vessel like high temperature high-pressure vessel, cryogenic tanks and Autoclave. TOYOTO KIRLOSKAR Ltd.
8. Fabrication. Preparing fabrication drawings for Bullet capacity 325,150,50 & 20 MT Mazagaon Dock Ltd. Mumbai.
9. Fabrication. Preparing fabrication drawings for Storage tanks capacity 100 kl & 50-kl H.P.C.L, Madurai.
10. Marking Plan layout, Elevation, Fabrication Preparing Marking Plan, Fabrication drawings, Such as Arch, Breeching Radiant shell for Atmospheric Heaters and Vacuum Heaters. C.P.C.L, Chennai.
11. Errection.
Erection Schemes of Various Equipments Like Heat Exchangers, Vacuum and Crude Columns, Reactors and Other Equipments Used in Fertilizers and Petrochemical Industries using Crane Like AMERICAN –11250, 9310 With SKY-HORSE / GUY DERRICK ARRANGEMENT India glycols ltd.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 6511)

Go to Search Parameters...

Brief Description

To seek holistic and enriching exposure in the field of technology and management with an organisation that is dedicated to say in the forefort of excellence.

I have over twenty years of experience, comprising of mechanical, piping and HVAC design, project management, construction supervision, mechanical systems startup and commissioning and board /computer drafting including PDMS, Intergraph ISDP 3D, AutoCAD and FLEX CAD on various marine, offshore pet

Rig Mechanic/Supervisor

Process engineer with experience in offshore/onshore oil & gas production, gas re-injection & lng facilities. pfd's, p&i diagrams, heat & mass balance, hysys, pro/ii, dynamic simulations, plant operations

Piping specs, equipment layouts, Piping General Arrangement drawings and Piping isometrics including BOM.

Electronics Technician

PDS Piping Designer, SmartPlant Review (SPR) v6.1, Proficient in Microstation J/ Modeler Ver. 7.1, Proficient in Microstation/J v7.2, Proficient in AutoCAD (2D & 3D drawing applications), Knowledgeable in Plant Design Management System (PDMS ), Knowledgeable in Bentley AutoPipe (Pipe Stress Analy),

I have degree in Civil engineering and 6 years experience with Oil & Gas Industry(Kuwait,Qatar,U.A.E,Georgia).I have valid driving licence of Qatar/U.A.E/Oman.Execution of Pipe rack foundations,Static/Rotary euipment foundations,Turbine,Boiler,Flare foundations, Control bldg and Sub station bldg.

• Over 15 years of experience in Petrophysics (Exploitation and Reservoir characterization)in clastic and complex carbonate reservoirs. • Detailed experience of acquisition, quality control, interpretation and evaluation of petrophysical (wireline, LWD and core) data.

Seeking a challenging and rewarding Chemical Engineering position with a progressive company.

handle the Project Independently, Installation Instruments* Loop Checking* Site Design *F&G System *Pre Commissioning Activities Erection of DCS,PLC *Knowledge of Analyzer System *Experienced in Senior levels *Good Leadership quality *Good interpersonal relationship

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

pipelines engineer, mechanical engineer

I am presently working as a field service representative for Ecolochem International,Inc. Presently assign in an Onshore Gas Plant for Shell Exploration Philippines. I work also as a assistant driller for Sedco Forex Sclumberger.

I am a Mechanical Engineer with Master degree in Mechanical Engineering,

Objective Secure employment in the petroleum industry working in reservoir exploitation, well planning, and/or completion operations.

German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.

Extensively experienced with the specification, bid evaluation and purchasing of mechanical equipment and pipelines.

I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.

12 years oil&gas experience geologist& mudlogger,8 years environmental scientist, MS&BS Degrees in Geology, recent education includes 32 semester hours of business and computer courses, 1989&90, 3.7GPA, 20 semester hours of graduate courses in environmental science, 1997, 4.0GPA

Seeking an opportunity to work in a professionally managed organization

Control System Hardware Design for DeltaV/ DCS

Subsea Pipeline Engineer with experience in the field of engineering (FEED & Detailed Design), material, installation and cost estimation.

Construction, Commissioning and Operation & Maintenance procedures including emergency response procedures in line with best industry practices and based on approved applicable standards, Engineering for Procurement, vendor drawing review, site co-ordination and supervision, installation and commiss

Based on my experiences and knowledge in implementing the safety procedures and teaching the safety techniques in working safely, I'm very confident to be a part of your good office. I promise to help your company Incident Injury-Free

I am a Qualified and experienced NDT INSPECTOR with ASNT LEVELII, and Diploma in mechanical enginner

Around 7.0 years of experience in design & construction of power plant structures, EHV indoor and outdoor sub-stations, industrial & residential structures.

Aspen 12.1, Pro II, HYSIS, DMC, CONTROL STATION

Reservoir engineer

Inspecton & certification of coating work

A highly motivated, team spirited and performance driven engineering professional with an extraordinary blend of experience in Petroleum refining industry. Recognized for keen ability for improvement in reliability of a wide range of static equipment like crude oil heaters, high temperature hydrogen

PDS, PDMS, Smart Plant Review, navis work

Proactive and versatile drafting professional with a solid reputation for generating long-term results in a short-term world. Effective problem-solver who interfaces well with management, co-workers and clients. Able to meet aggressive deadlines, juggle multiple priorities independently or in a team

Certified Internal Auditor, international auditor

Chief elecrician !!!

Material Management, Inventory control, Procurement, follow-up,Procurement Planning etc

A visionary executive with 16 years experience and proven history of outstanding performance in Industrial automation & Instrumentation in Project Design, Application and Development. Dynamic, skilled specialist with excellent record in Power, Refinery, Oil & Gas, Polyester, propylene, Pulp-Paper

Mechanical Engineering Technologist

Well logging, seismic data interpreting, sea mapping

Work History in brief: Hay Engineering Ltd - 1985-89 Sedco Forex - 1989-94 Retsco Intenational - 1994-99 Finnco Ltd - 1999-2000 Transocean Deepwater drilling - - 2000-2003 BP-CNOOC - - 2003 - present.

Experienced Cad Manager. Primary system experience in Autocad, Multisuite, Autoplant, CadDuct, ADT33. Other systems experience in MIcrostation, PDMS, Prime Medusa. An engineering background in Structural/Civil.

Bachelors in Technology - Chemical Engineering – 14 years performing works on: Hysys, Pro-ii, Pipe Phase, Sinet, AutoCAD, AutoLISP, Micro-Station, 3Dstudio Max, Primavera, MS-Project and MS-Office products

Objective To provide solutions that will maximize productivity and profits Status

33 years in various survey disciplines. 21 years onshore and offshore experience in hydrographic, engineering & seismic survey (hands-on surveys), & more currently in the last 13 years, navigation QC and Project Management.

The last 8 years I have been working mostly in Asia in Instrument and Metering engineering and Process Supervisor positions. I am experienced in working with Nationals and using CBTA on the job training and assessment methods. I currently have a valid BOSIET certificate.

Industrial and Heavy Equipment Technician

25 years experience operator / contractor experience willing to relocate status: single

Looking for work as an instrument tech. in the oil industry.

21 years in oil & gas From Insp Eng to welding inspector Exp on new and in-service plant QA/QC & clients rep on jacket & module fabrication Senior insp sub-sea pipelines, offshore platform hook-ups Insp Eng and plant insp on oil & gas platforms Familiar with most intl. codes & standards

Interrested in rotational international opportunities in Maintenance Management or Senior Maintenence Planning positions

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out