Resume - I am looking for a project or production engineering position.

Misco Jobs

Resume #5532

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

I am seeking a position in Production or Project Engineering.

ACHIEVEMENTS:

* Developed Auto Sketch drawings of site Utility & WTP distribution systems up to each unit's block limits. These Auto Sketch drawings were used later to develop or update the official distribution drawings on Micro Station.

* Developed computerized hydraulic models on PipeNet for all Utility & WTP site-piping systems.

* Accurately stated necessary expansions to site distribution systems for the inclusion of new and expanded units on site.

* I reviewed modifications to the site firewater system to ensure compliance with insurance carrier and NFPA guidelines.

* Developed plans and estimates for piping modifications and equipment necessary for a $12M Utility & WTP distribution system expansion. Expansion was necessary to support the installation of a new unit on site. System performed as required when complete.

* Became approver for modifications to Utility & WTP distribution system piping and drawings.

* Developed initial project plan for site energy reduction initiative using data collected by assigned team members. The site energy savings expected is $4M per year.

* Suggested modification to team reviewing boiler upgrades which resulted in $1.4M capital project savings in 2003.

* Suggested modification to site storm water team will result in savings of $3.6M when the project is installed in 2004 or 2005.

EXPERIENCE:

BASF 6/1/1990 to 3/31/2004
Technical Engineering Services (Utilities Plant/Water Treatment Plant)

Primary responsibilities as project engineer/manager include: operations support, analysis of projects affecting utility site systems, and capital projects.

Perform as team leader on capital projects from front-end development to successful closure. Projects performed as primary engineer range from $10,000 to $2,000,000. These projects include the installation of new air compressors, temporary boilers, generators, pumps, pipe racks, upgrades to compressor and boiler controls, continuous emission monitoring systems, modifications within WTP, and many header systems. I assisted as both operations and engineering support on a $52,000,000 Gas Turbine Cogeneration Plant installation.

Responsible for development of computer aided hydraulic models and primary contact for the Utility & WTP site distribution systems.

Trained as PSM Auditor in 1993 and have performed at least one internal audit per year since.

Programs used in performance of duties include: SAP R/3, Word, Excel, PowerPoint, Suretrac Project Manager 2.0, AutoDesk (Auto Sketch), Powerdraft, and PipNet

Texaco 1980-1985 (Oil/Water Separation Group)

In this position, my duties were two-fold. While in the research facility, I used varied analytical equipment for group research projects. Secondly, I traveled to field locations to solve various oil/water separation problems.

U. S. Army – 3 years active duty
Attended Primary Non-Commissioned Officers Course

EDUCATION:

New Mexico State University (NMSU) 1990
Las Cruces, New Mexico
Bachelors Of Science Chemical Engineering

ENMU-R
Roswell, New Mexico 1980
Associate of Applied Science Petroleum Production Technology

Attended the following courses presented by Global Power Generation Services for GE Power Systems in 1998.

Fundamentals of Gas Turbine Construction and Maintenance
Fundamentals of Gas Turbine Construction and Operation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 6511)

Go to Search Parameters...

Brief Description

Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

Operations Manager/Field Engineer - Borehole Seismic

Experience in project management, design, front end engineering, installation, testing and commissioning.

I am an energetic, hardworking candidate. I am seeking an entry level opportunity.

Having, 21 years in Instrumentation Field, Maintenance, Project and Execution includes Oil and Gas and Power Plant Experience with Gulf Experience more than 7 years. Having good exposure to PLC and DCS, with Leading Role responsibility

Obtain a position with a company that is a leader in the Drilling and Completion Fluid Markets of the Oil and Gas Industry. I offer my experience in product conception, presentations, extensive research and development skills

I'm a post graduate in M.Sc., engineering Phy & Instrumentation and having total 16 1/2 years hands-on experience on Control & Instrumentation systems (Maintenance and Projects ) being used mainly in Power plants /Steel /Pulp & Paper and Cement .

joined as shift driller and elevated to drilling superintendent. experienced in directional drilling. exposure in design, planning, drilling and completion of wells.

Looking for a challenging career with a progressive company as an instrument & controls specialist to demonstrate international versatile experience and leadership capabilities in the field of instrumentation and controls.

Professional engineer,17 years, heavy & conventional oil, oil sands & gas. Expertise-hydraulic fracturing, well testing, reserve analysis, property evaluation, simulation, log analysis, workover & stimulation, water flooding, steam stimulation, SAGD, horizontal well. International. Multilingual.

Graduate in Petroleum Engineering.

Steam and Power Specialist

24-years career including 6 in SAP implementation projects working as functional consultant in Logistic and Material Management. Also 18 years exposure to Procurement, Warehouse, Logistic and Project Management, and Supply Operation in Petroleum and Purchasing Services Industries.

I am looking for a project or production engineering position.

Hydrocarbon Measurement Specialist/Expert (PE) 25 years experience Current Measurement and Allocation Advisor BP GoM Deepwater Experience E&P, Pipeline, Refining/Chemical Last 5 yrs concentrated on subsea systems, multiphase and wet gas measurement, process simulation and phase-behaviour models

A geologist with a strong technical background in reservoir analysis, geomodelling and IT. A broad range of work experience within major oil and service companies and consultancies over 8 years. Well developed communication skills to all levels of management and clients

Marine Engineer First Class Motor FG (Unlimited); Tanker Endorsement (Product/Crude) 23 years Marine Industry experience; Tradesman Fitter And Turner; Seeking a position as Chief Engineer on a DSV type vessel or as a Mechanical Supervisor /CSR in a related role on or off shore.

Former Schlumberger Senior Field Engineer, operations and maintenance in land and offshore. Maintenance eng. for camp and drilling rigs in the Peruvian jungle, By now I’m supervising the maintenance of 5500 instruments in a major copper / zinc.. I´d like to work Overseas.

Twenty-six years in Offshore and Oil & Gas related engineering including FEED and TIE-IN work Twelve years Intergraph PDS (Equip. & Piping modelling Drawing Manager & Microstation). Including Isometric trouble shooting and PDS back-up support. ‘Optimeyes’ (Fluor Daniel CAD drafting system)

23 years experience in construction and project management professional with expertise in all facets of offshore oil and gas projects, pipelines, refinery and petro-chemical plant. Successful completion with various owners such as SHELL,TEXACO,UNION OIL, EXXON, ONGC, PEMEX, PETROBRAS

Dear Sir, I am applying for drilling personnel in the Philippines. I am a Filipino electrical engineer temporarily working in the USA. My permit will expire soon and I will go back to the Philippines. I once worked as assistant oil drilling engineer in the Arabian American Oil company.

Senior Petroleum Engineer with 17 plus years experience in field development and oil field operation. Experience also include work-over, well test analysis, well stimulation, artificial lift, waterflooding, cased hole logging interpretation.

Physically fit and mentally active person possessing considerable qualifications and experience gained with international companies on and offshore in industries such as oil & gas, gas compression, power generation, open cast quarry, and large-scale construction.

Diverse knowledge/broad engineering and management experience - 26 year employment career. Employed by highly-respected companies with skilled professionals, supervisors and co-workers that provided excellent training and insight.

Profile Motivated, reliable and adaptable professional with extensive experience in management, quality assurance, engineering metallurgy, government service, academe and ISO management systems

Marine Mechanical Engineer with work experience more than twenty years incl. Oil Gas Industry. Education: Maritime Academy (five years course). CEng, MIMarEST.

an industrious, focused minded person with great leadership qualities and skills able to build teams that will think creatively and design profitable organizational changes

Objective: To utilize technical and administrative skills to be a team to provide support in Instrumentation and Control field

Electrical and Instrument Engineer

Highly-motivated project engineer/project manager with extensive experience in the design and project management of natural gas transmission and gathering pipelines and associated facilities. Key strengths include: a broad base of knowledge and the ability to solve difficult problems

I am a Senior Directional Driller with Schlumberger Overseas SA. Graduated from Colorado School of Mines, USA in Petroleum Engineering

Instrument

A fully certified (NACE CIP I, II, & III) & highly motivated manager with over 18 years experience in the Oil & Gas Industrial Painting Sector. Over 15 years of this experience has been in the field of corrosion engineering projects for Shell, BP, DNV & International Coatings.

I have got 12years of extensive experience with sound technical background in the maintenance of large turbo machines such as turbines (steam and gas), compressors (centrifugal, axial, screw and reciprocating),and various types of pumps present in offshore, large Refinery, petrochemical, Power and d

A safety professional having more than 14 yrs of experience in oil & gas industries

Experienced Piping Design Engineer

System Analyst with 16 years experience. Skills - Visual BASIC, MS SQL, Oracle, OSA

25 years of experience in the oil and gas industry working with various companies on varied projects from the office phase to final production and beyond.

Over 16 years of experience in Oil and Gas facilities design, construction support and process piping design. FEED experience as an EPC contractor and as Oil Operator/Owner/Client. Greenfield & Brownfield engineering design experience.

Had gained tremendous experience in Product Planning and Scheduling. Good in modeling and analysis. Holds Master Degree in Chemical Engineering.

10 years experience working in in-house seismic processing and Field QC processing around the world

Drilling Fluids Treatment & design as per Client satisfaction & provide optimium Drilling fluid services & Solutions.

Over ten (10) years experience in mechanical engineering for major oil, gas and petrochemical projects. Proficient in basic and detailed engineering, construction supervision and monitoring, project planning and control. Working knowledge of engineering codes and standard.

An experienced Engineer of over 18 years of Industrial experience with a high level of expertise in a variety of related aspects of Project & Operations Management and Process Engineering Management within the Oil and Gas Industry.

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

Reservoir engineering, development plan and management of upstream projects.Exceptional communication & interpersonal skills,In depth experience, in strategic planning, identifying new opportunities, execution of business plan, managing policies, problem solving, motivation and training,

I am having experience in Both static & rotating equipments

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out