Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #55473 next resume »» CONTACT INFORMATION: View contact information... Educational Qualification:  GRADUATE DIPLOMA IN MECHANICAL ENGINEERING (3 year full time course-Karalla state Government Board, India) Professional Certifications:  CSWIP certification as SENIOR WELDING INSPECTOR - ( 3.2) - 2004  NQA-UK Certificate of Training (IRCA Registered) in ISO 9001- 2000 QMS Auditor. - 2005  NACE COATING INSPECTOR LEVEL 1 – CERTIFIED - 2007  ISNT (Indian Society for Non Destructive Testing) Certification as Welding Inspector. - 1997  ASNT Level II - Certification on U T, R T, M T, P T. - 1997 Experience Brief: I have 16 Years Experience in PIPING, MECHANICAL AND PAINTING JOBS – construction & maintenance (QA/QC Activities and Job Supervision) in Petro-Chemical, Chemical, Oil, Gas, Refinery & Pipeline Projects in India and Abroad.  Develop, Review & Approval of WPS, QCP, ITP, and Material Inspection and certification review.  Supervision of Piping, Mechanical and Painting jobs (Construction & Maintenance) in line with Project requirements.  Conducting and witnessing PQR and Welder Qualification Tests according to ASME section IX/31.3, AWS D1.1, AWWA M11/C206, API 1104 & Project Specifications for Petro-Chemical, Oil, Gas, and Refinery & Pipeline Projects.  Conduct regular Auditing of Internal & External service providers. Calibration records, PWHT, Hardness and PMI verification  Familiar with related Inspection Procedure, Codes & Standards of ASME,AWS,API,ARAMCO,QP,PDO and AGIP Specifications.  Dealt with the preparation, issuing and closeout of Discrepancy, Non-Conformation report as required.  Inspection of Coating and Painting activities for Piping, Pipeline and Structural jobs.  Monitor the performance of Contractors. Stage wise & Final Inspection of Piping, Pipeline and Mechanical jobs & covering of NDT.  Repair follow-up, Conforming line check as per P&ID, NDT clearance, Punch List preparation, follow up of final completion.  Interpreting and evaluating of NDT Results, witnessing Hydro test, Pneumatic test and Post test Re-instatement.  Document tracing, QC status reporting, Maintaining all QA/QC documentation and Data Dossier preparation and review.  Provide Technical practical support and training to supervisors. EMPLOYMENT HISTORY: SENIOR WELDING INSPECTOR, 2006–PRESENT, BUREAU VERITAS INSPECTION LTD. (WORKING AS CLIENT -AGIP KCO- REPRESENTATIVE) Kashagan Experimental Development Project – (AGIP KCO, Atyrau, Kazakhstan) Responsibilities: - Review & Approval of QCP, ITP, WPS and Material Inspection and certification review. Witness PQR and Welder Qualification tests as per ASME Section IX / 31.3. Monitoring and Inspection of Welding, Fabrication and site Installation activities of Piping and Mechanical jobs. Review and witness of NDE. Issuance of Punch list. Giving clearance and witnessing for Hydrostatic Test. Review Test Packages SENIOR QA/QC INSPECTOR – MECHANICAL, 2005 – 2006, WORLEY PARSONS - ARABIAN INDUSTRIES J.V. - OMAN E M C Project- (Petroleum Development of Oman) Responsibilities: - Conducting PQR and Welder Qualification tests as per ASME Section IX / 31.3. Monitoring and Inspection of Fabrication, Welding and Painting activities of Piping and Mechanical jobs as per ASME/ANSI B 31.3 and PDO Specification. Inspection of Coating and Painting activities. Review and Interpretation of Radiography films and witness of other NDT. Follow Up of Non Conformance Reports. Issuance of Punch list. Witnessing Hydrostatic test. Preparing Inspection Reports, Final Test Packages QA/QC INSPECTOR (WELDING / PIPING), 2003 – 2004, CONSOLIDATED CONTRACTORS INTERNATIONAL COMPANY. – QATAR. Common Cooling Water Pipeline Project. (EPC)- (Qatar Petroleum) Responsibilities: - Conducting Welder Qualification tests as per ASME Section IX, AWS D1.1, AWWA M11/C206, and API 1104. Monitoring and Inspection of Welding, Fabrication and site Installation activities of Carbon Steel and Copper Nickel Piping as per API 1104 and Project specification for Pipeline Project (Common Cooling Water Project,). Review and witness of NDE. Control of Repair Welding. Issuance of Punch list. Giving Mechanical and NDE clearance for Hydrostatic Test. Witnessing Hydrostatic test. Preparing Inspection Reports and Final Test Packages QA/QC INSPECTOR (WELDING / PIPING). 2001 – 2002, MID EAST CONSTRUCTORS LTD. - QATAR LNG Plant (ARAB-D, DUKHAN, Qatar Petroleum) Responsibilities: - Conducting PQR and Welder Qualification tests as per ASME Section IX/31.3 and QP Specification ESL 22/23. Monitoring and Inspection of Fabrication, Welding and site installation activities of Carbon Steel and Stainless Steel Piping as per ASME/ANSI B 31.3 and Project specification for LNG Plant (ARAB-D,DUKHAN).Control of Repair welding. Review and Interpretation of Radiography films and witness of other NDT. Follow Up of Non Conformance Reports. Issuance of Punch list. Witnessing Hydrostatic test. Preparing Inspection Reports, Final Test Packages Q C INSPECTOR (MECHANICAL). 1995 – 2000, A.Y.T.B. CO. LTD. - KINGDOM OF SAUDI ARABIA. Petro-Chemical and Refinery projects - (LUBREF - Yanbu, SADAF - Jubail) Responsibilities: - Material Inward Inspection and check material trace ability through out the execution of work. Inspection of Fabrication and site installation activities of Structural and Piping jobs required for Petro-Chemical and Refinery projects. Issuance of Punch list. Preparing Test Packages and Giving Mechanical clearance for Hydrostatic Test. Witnessing Hydro Testing. ASSISTANT ENGINEER, 1994 – 1995, PETRON ENGINEERING CONST. LTD. - INDIA. Poly Propylene project – (Reliance Industries LTD, Gujarat, India) Responsibilities: - Conducting P.Q.R. & Welders Qualification Tests as per ASME Section IX / 31.3. Inspection of Welding, Fabrication and site installation activities of Heavy Structures and Piping, required for Poly Propylene project as per relevant codes and client specification. Control of Repair Welding. Prepare and Submit Inspection Offer Letters to Client/Consultant. I was responsible for getting Work/Equipment Inspected by them. Making Records & Reports of Fit-Ups, Alignment, Non-Destructive Tests, W.P.S., and P.Q.R. etc. SUPERVISOR – PIPING, 1993 – 1994, SHAPPOORJI & PALLONJI CO LTD.-MUMBAI, - INDIA. Chemical Plant project – (Gharda Chemicals Ltd., India) Responsibilities: - I was responsible for Maintenance and Construction of Piping jobs maintaining required Quality standards as per Project specification for Chemical Plant project. Liaison with Client, TPI and Consultant. Preparation of Progress Records and Reporting. SITE SUPERVISOR, 1988 – 1993, WELL - FAB ERECTORS PVT. LTD. - MUMBAI, - INDIA Chemical & Petrochemical projects – (Gharda Chemicals / Reliance Industries Ltd, India) Responsibilities: - I was responsible for Maintenance of Structural and Piping jobs maintaining required Quality standards as per Relevant Codes and Project specification for Petro Chemical and Chemical Plants. Liaison with Client, TPI and Consultant. Quantity preparation for Billing, maintaining Progress Records and Reporting. View contact information... «« previous resume next resume »» Search Results (Resumes 651 to 700 of 6520) Go to Search Parameters... Brief Description Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast. Maint Planning, Materials management, warehouse, plant maint, turnaround, project Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation Reservoir/Geoscience Technician Completion/Workover Supervisor I am a mechanical engineer possessing over 15 years of rich experience with the Oil and Gas sector and Petroleum Industry. The basic areas of my expertise are Planning & Development, Project Management & Execution, Design and Detail Engineering. Having qualification CSWIP 3.2 & Bgas grade2 from TWI - U.K Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer. Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect Instrumentation ICSS commissioning specialist SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP Professional with a BS degree in Physics electronics, an MS in Project Management. I have experiences in project engineering and oil/gas seismic exploration. This background with over 20yrs work history equips me to deliver projects on schedule, with quality and within cost. Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes. I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3). Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic Telecom Engineer transmission speciality more than 16 years experience 18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures. I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping. I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate. Experience well test engineer OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2 With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc. Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint 17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems. Piping related job like draftsman or designer ability to work on microstation, have experience of near by 35 years as piping draftsman; Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER PABX SERVICE ENGINEER Production Engineer with 12 years of industry experience BSc in env. MSc in safety eng. Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards. A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer) Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge. Free! I am applying for the job posting in Fory McMurray with Sands Surveys 2000. I am fully qualified and looking forward to hearing from you. Please see my resume for my experience. I am available to start work when you need me to. Field Engineer GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT Petrophysicist, Log analyst He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication . DCS Lead Engineer Experienced Geophysicist 10 years in Geophysicist B.Tech (Chemical) with 13 years 10 months experience Having 13 years of exprience in maintenance construction and design field of all types of instruments in oil and gas industry.preference given for offshore / on shore ON/OFF duty jobs. Instrumentation engineer B.E (Electronics) with experience in Engineering /Design in the field of instrumentation. My experience in the sector of EPCM’s and E&P includes the supervision of different Oil and gas Projects in the upstream and downstream sector, incl: insta; Erection and commissioning First   1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com