Resume - I am post graduated from I.I.T roorkee and have 3 yr experience in oil and gas c...

Misco Jobs

Resume #55927

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS M.Tech. Structures Dynamics (Civil), from
Indian Institute of Technology Roorkee
Roorkee, India.
B.Tech. Civil Engineering, from
Government Engineering College Kota
Kota (Rajasthan), India
KEY EXPERIENCE Having overall 3 years of Post Graduate experience in wide areas of Oil & Gas Industry (Offshore) as Structural Engineer
Work Experience
1. Working as Structural Engineer (Offshore) in WS ATKINS & PARTNERS OVERSEAS, Sharjah UAE from April 2006.
2. Worked as Structural Engineer (Offshore) in Triune Project Private Limited, New Delhi from July 2005 to March 2006..
3. Worked as Engineer (Structures) in J.P.Kenny Triune Project Private Limited, New Delhi from July 2005 to March 2006.
4. Worked on some Research project during M.Tech.

Detailed Work Experience and Projects
* Detail design of new improved Boat Landings in PS-2 & PS-3. [Ongoing Project]: QP owns and operates PS2 (Maydan Mahzam) and PS3 (Bul Hanine) offshore oil fields. The scope of the present work is to carryout the Detail Engineering Design of total six (6) numbers of Boat Landings, three (PS-2D/E/G) in PS2 (Maydan Mahzam) and three (PS-3D/E/G) in PS3 (Bul Hanine) offshore oil fields.The existing boat landings of PS-2 D/E/G and PS-3 D/E/G platforms will be wholly replaced with the improved design to cater for the existing deficiencies for adequate maintenance, easier inspection, easier construction, and lighter, stronger boat landings.
i. Modeling for Jackets & proposed Boat Landings using SACS
ii. Inplace and collapse analysis for the boat landings.
iii. Liting and Transportation Anlysis for Boatlanding iv. Sea fastening, padeye design

* SASB Offshore Tripod Jacket & Deck – Turkey, Black Sea (Toreador Turkey Ltd.: Toreador Turkey Ltd., operates in Black Sea 18km from the Turkish coast The water depth in the Field varies from 61m to 96m. TPOA with toreador turkey intent to install 3 well head platform at following locations i.e. Ayazli, East Ayazli and Akkaya.
I. Inplace, Lifting and Transportation, floatation, Towing, seismic, pile lifting, pile upending, jacket upending Analysis for the east ayazli jacket using SACS
II. Cathodic protection and boat landing design for Akaya jacket
III. inplace, lifting, transportation, analysis for east ayazli deck using SACS
IV. Sea fastnening design for piles and deck for east ayazli jacket using SACS
V. Preparation of Weight Control Report for Deck and Jacket.
VI. Deck & jacket Miscellaneous Design i. e., Crane Pedestal, Crane Boom Rest, Equipment Support, Bollard, Conductor Guide and Staircase etc.
VII. Buoyancy Tank, Lifting Pad eye, doubler plates and stiffener Calculations for jackets and decks.
* J. Ray McDermott Middle East, Inc. (JRMMEI), Dubai (2006)
Design & Engineering for Jackets & Topsides for Saudi: Detailed Engineering/Design for Two numbers of Well Head Jackets and 4 PDMs (Topsides) to be installed for Saudi Aramco.
i. Transportation, On-bottom Stability Analyses of the Jackets using SACS software.
ii. Design/Analyses of Mudmat, and Secondary steel etc.
iii. Preparation of weight control Report

* Mobile Vent System: structural design of various skids for mobile vent system which is used to vent of an isolated 42" gas pipe line section at anyone of five block stations of south Caucasus pipeline, Azerbaijan Section.
i. Analysis and design of orifice skid, pipe spool container, nitrogen skid, vent stack for vent system using SACS 5.2 software.
ii. Manual design of connections iii. Preparation of weight control report

* F.P.S.O: The RJS-409/415 project includes the provision of an FPSO capable of processing 100,000 barrels of oil per day, compressing 87 million cubic feet of natural gas per day and injecting 113,000 barrels of water per day. The FPSO will be able to store 1,600,000 barrels of oil. MODEC has been awarded the project from Petrobras for the supply and operation of an FPSO to be located on the 1-RJS-409/3-RJS-415 areas of the "Espadarte Sul" field of Brazil's Campos Basin. structural design work is awarded to Triune Project Private Limited i. Inplace, Lifting, Transportation, load out design of topside modules for FPSO using SACS software.
ii. Preparation of Weight Control Report for Topside iii. Lifting Pad eye, stiffener design using manual calculation as per AISC and ABS guidelines.
iv. Manual calculation of topside plates and stiffeners

* Onshore projects
1. Pipe Rack design: Analysis and design of platform for equipment and design of pipe rack support using STAAD and manual calculation.(Triune Project Private Limited )
2. Design and Analysis of buildings for Anand Rajkot Pipeline Project. (JPKT)
3. Block foundation design for compressor 600 SCMH, 1200 SCMH at kanpur (JPKT)
4. Design and Analysis Booster fan foundation. (JPKT)
5. Design of water tank for kallol meshana pipe line project (JPKT)
6. Non linear analysis and Retrofitting of AIIMS Building, New Delhi using RAM Rerform 3D (IIT Roorkee)
7. Finite element Modeling of a shear wall core using ANSYS 7.0 (IIT Roorkee)

Projects done during Study
* Topic of Dissertation in M.Tech: "Seismic Behaviour of Frame shear wall building" Non-linear behaviour and performance of buildings under expected earthquake have been studies using Non-linear static push over analysis in RAM Perform 3D software.
* M.Tech. Project: "Earthquake Resistant Analysis of Multistory RC Building using IS Codes": A complete earthquake resistant analysis of a RC multi storey building situated in zone V as per the provisions of IS-1893.

Major Subjects in M.Tech as a key knowledge:
* Finite Element Analysis
* Theory of vibration.
* Structural Dynamics ( Response Spectrum Analysis & Time History Analysis)
* Computer Aided Structural Analysis and Design.
* Design of Earthquake resistance buildings and Dams.

Major Subjects in B.Tech as a key knowledge:
* Hydraulic analysis
* Soil Mechanics
* Structural analysis
* R.C.C. and Steel Design

Career Objectives
"Wish to work in a professional environment to be able to contribute towards the overall objectives of the organization, simultaneously seek avenues for personal growth, learning and development."
"Eventually, I wish to strive and translate my efforts into recognizable and results.

Computer Exposure

Structural Analysis Packages SACS (Structural Analysis Computer System), and STAAD, RAM perform 3D, ANSYS (familiar)
Other Packages AutoCAD, 3D Home Architect, Adobe Acrobat, 3D- Max and Office XP.
Operating Systems Dos, Windows 98, 2000 and XP
Languages FORTRAN and HTML

Personal Details:
Father's Name: Shri. Hukam Chand Jain
Date of Birth: 08-08-1980
Sex: Male
Nationality: Indian
Martial Status: Single
Languages Known: Hindi, English
Awards and Achievements:
* Qualified GATE-2002 with 98.02 percentile.
* U.G.C. fellowship for pursuing M.Tech. at IIT-Roorkee from 2002-2004.

Hobbies: Solving Puzzles, Playing carom, Table Tennis

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2701 to 2750 of 6445)

Go to Search Parameters...

Brief Description

I am post graduated from I.I.T roorkee and have 3 yr experience in oil and gas consultancy(offshore) after post graduation. I have sound knowledge of SACS, STAAD softwares

Lead Quality Engineer / Inspection Engineer / Welding Engineer

I am a Chemistry graduate having fifteen years experience from petorchemical and ammonia plants. At present I am working as a shift chemist in Saudi International Petrochemical Company. Previously I was worked in Madras Fertilizers Ltd as Senior Lab Analyst. Kindly consider my resume.

Experienced in analytical techniques in hydrology/hydrogeology. Expert in modeling of ground/surface water using a variety of software. Skilled at managing moderate teams through planning, execution and report writing. Excellent written and verbal communication skills.

Engineer PhD + 8 years experience in fluid flow and flow assurance including research and development with paraffin deposition problems. Extensive experience with modeling and analysis of multiphase flow problems.

Sr. instrumentation engineer with 11yrs of exp in the commissioning, startup and maintenance of petrochemicals and refinery.

I am a 39 year old South African Male seeking employment in the Petrolium/Oil/Gas Field. I am a qualified Fitter & Turner with relevant experience.

9 yrs experience in process engineering for Refinery, Natural Gas, Petrochemicals areas, worked on FED,DD projects; de-bottlenecking studies & residual engineering work. techniques of hazard analysis & HAZOP studies. used process simulation software ChemCAD 3.0, HYSIS,PipeSim & Pipephase

Working on campus at Texas A&M University–Kingsville has provided me with a variety of skills and talents. I also have an extensive knowledge of a variety of computer applications. I am always interested and open to further training & I am willing to relocate.

QC Geophysicist for 2D Seismic Reflection data acquisition. Geophysicist for data acquisition processing & interpretation of Seismic Refraction. Resistivity data acquisition processing and interpretation for water investigation Familiar with computer packages

Included in body & contact information.

hydraulic technician/fitter

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

I am looking for a job in the petroleum industry. I have a B.S. degree in petroleum engineering. I have over 11 years of experience and training related to petroleum engineering. Most of my experience was as a mudlogger. I am very interested in an office position relating to formation evaluation.

Looking for Field Engineering position.

My first 5 years of experience covers TURN KEY Project Management / Estimation / Execution-Supervision / Installation, Water Trials, Commissioning, Maintenance, Trouble Shooting, etc. & last 7 years in Piping Design & Eng.

QA/QC Engineer / inspector -piping or structural, b.sc engineering

GRADUATE PETROLUEM ENGINEER SEEKING JOB OPPORTUNITIES IN THE UPSTREAM OIL AND GAS SECTOR

I have completed Four Year Batchelor of Chemical Engineering from Pakistan and have 3 years of fertilizer industry experience related to basic and detailed engineering design of ammonia and urea plants.

Experienced in the CAD programs:PDS 8.0 (3 Months)

GOOD USER OF SOFTWARES LIKE PDS, MICROSTATION,MICROSOFT OFFICE , AND GOOD TEAM WORKER

Proficient in AutoCAD, Allen Bradley PLC, HART Communication Protocol (Rosemount, Foxboro, Yokogawa, Honeywell, and Endress+Hauser)

7 years experiense in Kazakhstan

Automation Engineer- PLC ,SCADA programming and Electrical Engineering

Electrical Mainteance & Repairs HND Elecct/Elect, City&Guilds Level 4 London (HNC/B.TECH.)

Mud engineer, drilling fluid engineer,computer skill, etc...

My career objective has always been to contribute my education and engineering skills within a growing and dynamic organization.

Bachelor Degree in Metallurgical and Materials Engineer in Brazil. I have 2 years experience working with quality inspection in a maintenance Company for Oil/Gas Industry, also 4 years of experience in laboratory on materials testing and characterization.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

I am Electronics Automation Engg. I am design Hardware&Software of Project

Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I

Electronics and Instrumentation Engineer

Static equipment design engineer with 4 yrs. experience in design also handled coldbox, surface condenser package items willing to work overseas

3 yrs diploma in mechanical engineering and have 7 yrs experience in operation and maintenance of DG sets & auxilliaries like compressors,WHRB,pumps etc

AB PLC , Siemence PLC Safety PLC

Chemical Engg with 4 yrs experience in Design, R&D. HAve exposure to INPLANT, PIPENET, ASPEN, HTRI

Advanced SCADA Application Specialist, design, commissioning and training

Knowledgeable in PDS, Microstation, SPR, AutoCAD and Caesar II.. Good Communication Skills.. Consistent President of the Class.. From JGC Corp

Being HSE officer for the site (Ahmedabad) involved in the preparation and execution of Emergency Management System for the sites. (Documentation, Displays, Training, Information to External Agencies, )Carrying out Safety Audits, Monitoring of implementation of punch points and reporting etc.

Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

Planning and scheduling, Project and Maintenance

seismic interpreter with a strong background in petroleum and structural geology, gained through working on a wide range of fields in different structural settings in the Syrian Euphrates Graben area. A skilled user of the Geoframe and OpenWorks software suite. Completed seismic interpretation

I am a Mechanical Engineer having Post graduation diploma in power plant ,working since Nov'02 in the field of power plant execution

5+ years production and design experience in refinery, PDS, PROCAD, Microstation, AUTOCAD,LDT

Process Engineer

Deepstrip rectification, in-depth examination, non-destructive testing, fault diagnosis and post installation testing of gas turbine engines

CSWIP – 3.1 welding inspector certified from TWI,All stage wise QC related activities for the fabrication and installation of pipeline, piping and structural for offshore platforms and other related works

Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, Chemicals, Petrochemicals, Fertilisers Plants. 5 years experience in Operating Refinery of KNPC. 9 years of cosultancy (EPC) experience. 2 years of Piping design & construction experience.

Over ten years of experience in the field of Electronics and Computer Engineering

First Prev 51 52 53 54 [ 55 ] 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out