CONTACT INFORMATION:
View contact information...
SUMMARY OF EXPERIENCE
I have a good cross sectional background and 10 years experience in mechanical and heat transfer engineering within the oil and gas industry on all aspects of rotating machinery and packages.
This includes working for both the client and main contractors from the design concept through to the commissioning phase for platforms, LNG plants and FPSO's in Europe, Middle East, Russia, West Africa and Asia. Key hands-on experience relates to power generation, gas compression, water & gas treatment, waste heat recovery/steam production, electro-hydraulic powered systems, high pressure pumping, flares, drilling equipment and lifting appliances.
I am also fully conversant with all international industry standards, codes and recommended practices required for specification, selection, design approval, witness testing, inspection, preservation, installation, commissioning, start-up, maintenance and technical services.
CAREER SUMMARY
July 2007 to date
BP/ADMA OPCO - Senior Mechanical Engineer - Malaysia and South Korea
Umm Shaif Gas Injection Facilities - Abu Dhabi, U.A.E.
Compression Platform CP-1 (600 MMscf/d, 13 000 T), Collector Separator Platform CSP-1 (1 000 MMscf/d, 305 mbd oil, 7 000 T), Utilities and Accommodation Platform (7 000 T)
- Detailed engineering in Ranhill Worley Parsons offices, Kuala Lumpur
- Construction and commissioning in Hyundai Heavy Industries shipyard, Ulsan
* Verify engineering procedures, specifications and standards
* Check the basis of design, equipment and packages specifications, data sheets, requisitions and technical bid evaluations
* Provide recommendations on the equipment selection to meet project requirements
* Review vendor proposal, documentation and drawings and ensure compliance
* Participate in project, client and vendor meetings (Kick Off, design review, HAZOP)
* Attend Factory Acceptance Test at Vendor premises
* Support construction site and supervise completions and commissioning activities
* Prepare and manage punch lists till closure
-Fuel gas conditioning (scrubber, coalescers, superheaters, 25 MMscfd, 90 bar)
-Produced water treatment (hydrocyclones & degassers, 850 m3/h)
-4 Air compressors (screw, 1 000~2 000 Nm3/h) and heatless dryers
-3 Acid gas flares (750~1150 t/h)
-3 Gantry cranes (5~15 T), Seawater pumps intake strainers retrieval system
-6 Submersible jockey & service seawater lift pumps (60m3/h, 19 bar)
-2 Nitrogen generation packages (membranes, 350 Nm3/h)
-2 Electro-chlorination packages (up to 12 kg/h)
-6 Chemical injection units (diaphragm pumps, up to 360 bar)
-10 Autobackwash strainers (up to 3900 m3/h), GRP & steel tanks
May 2006 to Jun 2007
RasGas (ExxonMobil/Qatar Petroleum) - Package Equipment Engineer - Qatar
RGX2 Onshore LNG Expansion - Trains 6 & 7 - 7.8 MTA LNG - Ras Laffan - Qatar
Chiyoda Technip JV - Japan/France/Abu Dhabi
* Review EPC contractor and Vendors documents (Equipment data sheets, Purchase requisitions, Engineering studies, Construction drawings, Inspection and test plans, P&ID's, field installation procedures) to ensure compliance with job specifications and verify safe and operable packages features
* Participate in Lessons learnt, PID, HAZOP, SIL and 3D model reviews
* Monitor equipment follow-up visits and witness testing at Vendors shops, participate with EPC contractor in resolution of equipment testing problems
* Provide input to Control Management of Change and Risk Management activities
-4 gas turbine Heat Recovery Steam Generators with sup. firing (220 t/h, 41 bar)
-3 Steam Boilers with NOx reduction (240 t/h, 41 bar)
-3 Desalination units (multiple-effect distillation with thermocompression, 90 t/h)
-Nitrogen generation (7000 Nm3/h), liquefaction (500 m3/h) & cryogenic storage
-Sludge handling (60 m3/h, flocculation, coagulation, decantation, centrifugation)
-Caustic scrubber (700 Nm3/h), HCl acid scrubber (20 Nm3/h)
-Water treatment (m3/h): well injection (250), polishing (190), remineralisation (4)
-Gas flares (t/h) with steam injection: dry (2200), wet (1900), acid (260)
-Compressed air dryers (10 000 Nm3/h)
-Chemical injection units (20 off: anti-emulsion, methanol, caustic, HCl acid...)
Jan 2005 to Dec 2005
Amec - Mechanical Technical Specialist - South Korea
Shell Sakhalin 2 Lunskoye LUN-A (23 000 T, 16 000 bpd, 1 800 MMscf/d) and Piltun Astokhskoye PA-B (28 000 T, 70 000 bpd, 100 MMscf/d with NGL recovery) drilling & production rigs in ice-infested waters - Sakhalin Island - East Siberia - Russia in Samsung Heavy Industries shipyard, Gyungnam
Russian "General Designer" & Field engineering for mechanical, drilling and safety; topside
Inspection, follow-up and acceptance of mechanical completion work, resolution and approval of field engineering changes and site queries, verification and settling of outstanding punch points and FAT works, monitoring of preservation & disconnections.
Feb 2004 to Nov 2004
Amec Fluor Daniel JV - Mechanical Commissioning Engineer - South Korea
ExxonMobil Kizomba B FPSO (2.2 million barrels, 250 000 bpd, ultra deep-water) - Angola
10 months in Hyundai Heavy Industries shipyard, Ulsan
Same responsibilities as in Kizomba A FPSO development. In addition:
-3 gas turbine Waste Heat Recovery Units (23 MW) & heating medium loop
-2 inert gas generators (10 000 Nm3/h), distribution & venting systems
-1 helicopter refuelling system (14 m3/h)
-mechanical workshop equipment
Jan 2003 to Jan 2004
Amec Fluor Daniel JV - Mechanical Commissioning Engineer - South Korea
ExxonMobil Kizomba A FPSO (2.2 million barrels, 250 000 bpd, ultra deep-water) - Angola
13 months in Hyundai Heavy Industries shipyard, Ulsan
Summary of responsibilities for topside modules:
* Preparation of procedures for onshore & offshore phases from start to finish
* Implementation in the electronic project completion tracking system (WinPCS)
* Development of mechanical completion, pre-commissioning, commissioning step by step & preservation procedures; coordination & field assistance to all parties:
-2 HP centrifugal turbo-compressors (30 MW) & ancillaries (scrubbers, coolers)
-1 LP/IP centrifugal moto-compressor (5.6 MW) & ancillaries (scrubbers, coolers)
-3 electro-hydraulic lattice boom cranes (34 T @ 58 m, 10 T @ 73 m)
-living quarter sanitary waste system (140 p.)
Jun 1999 to Dec 2002
Doris Engineering - Mechanical Engineer - France, the Netherlands and South Korea
Summary of responsibilities on offshore projects:
* Preparation of engineering specifications for rotating process equipment, machinery and packages on the basis of process specifications
* Preparation of the technical part of the inquiry and purchase requisitions
* Evaluation of the manufacturer proposals
* Vendor data review/engineering follow up
* Participation in final acceptance tests carried out in manufacturer workshop
* Preservation, maintenance, spare parts and punch points management
* Field supervision during erection, commissioning and start-up of equipment
Oct 2000-Dec 2002
TotalFinaElf - Amenam/Kpono Unity FSO (2.2 million barrels, 230 000 bpd) - Nigeria
First successful attempt in the world to build a very large vessel-type offshore structure with hull blocks & topside modules on land, rather than in a dry dock.
As only Client mechanical supervisor, basic engineering:
4 months in IHC Gusto Engineering offices, Schiedam - the Netherlands detailed engineering, construction (hull & topside) and onshore commissioning:
21 months in Hyundai Heavy Industries shipyard, Ulsan - South Korea
-3 turbo-generator sets (5.25 MW)
-2 hydraulic cargo pumping systems (3.5 MW)
-2 emergency diesel generator sets (1.5 / 1.8 MWe)
-2 containerised hydraulic and mechanical firewater pumps sets (1000 m3/h)
-1 offloading centrifugal booster pump (7200 m3/h)
-2 pressurised hot water boilers (12 MW)
-2 inert gas generators (10 000 Nm3/h)
-2 box boom electro-hydraulic cranes (18 T @ 30 m)
-marine handling appliances (200T quick release hook, 50T & 15T winches)
Jul-Sept 2000
TotalFinaElf - Peciko 2 - wellhead platform - Indonesia
Basic engineering; topside
Development of specifications, purchase requisitions and data sheets for:
-1 diesel-hydraulic crane (15 T @ 25 m)
-several auxiliary gas driven injection pumps
Feb-Jun 2000
TotalFinaElf - Tunu 8 - gas compression rig - Kalimantan swamps area - Indonesia
Detailed engineering; topside
Development, review and "for purchase" release of specifications and data sheets of:
-2 MP turbo-compressors (26 MW)
Basic engineering; topside. Development of mechanical specifications and data sheets, preparation of handling studies for:
-2 turbo-generators (5 MW)
-1 emergency diesel generator set (800 kWe)
-10 vertical canister pumps
Jan-May 2000
TotalFinaElf - Erika shuttle tanker wreck - cargo recovery - offshore Brittany - France
Conceptual design, basic and detailed engineering; topside & sub-sea
Carried out screening studies, reliability analysis, complete design definition and shop tests in France, Germany and Norway in readiness to handover to client:
-2 sub-sea hydraulically driven twin screw pump sets (50 m3/h)
-2 hydraulic power units (75 kW)
-2 spiral heat exchangers (4 MW)
Jun-Dec 1999
Veba Oel - F02a Hanz Field - production rig (10 000 T) - North Sea (Dutch sector)
Detailed engineering; topside
Development of mechanical specifications and data sheets, approval of Vendor documents, amendment to purchase requisitions of Long Lead Items for:
-1 diesel driven firewater pump (1000 m3/h)
-1 electric motor driven firewater pump (1000 m3/h)
-1 electrochlorinator package (5 kg/h)
Nov 1998-Feb 1999
Selas S.A. - Site Engineer - Linz, Austria
Commissioning of blowers, pumps and heat exchangers for a jet cooled continuous annealing line of VoestAlpine AG. Updating of P&ID's to "as built".
COMPUTER KNOWLEDGE
Proficient in:
* Microsoft Office, Adobe Acrobat,
* Data management software (CDMS, X-Net, ShareCat, ProArc, DmNet),
* Project completion certification tools (WinPCS, Thule),
* 2D/3D drafting (AutoCad, PDMS, PDS, Visio)
LANGUAGES
* French: mother tongue
* English: fluent
OTHER INFORMATION
* Trained in First Aid and Defensive Driving (2005)
* Clean driving licence (1992)
REFERENCES AND RECOMMENDATIONS
* Selection of references and recommendations available upon request
View contact information... |