Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #56479
next resume »»
CONTACT INFORMATION:
View contact information...
Having 11 Years Experience in Piping, Pipelines, Steel Structural, Tank Erection and Boosting Station.
Worked In Power Plant, Petroleum Refinery, Oil Gathering Center And Petrochemical Industry.
Well Experience in Engineering, Procurement, Construction and Mainly Inspection.
Approved Inspection Supervisor In KNPC.
Approved QA / QC Inspector for Painting & Blasting In KOC.
Approved Electro mechanical QA / QC Inspector in MEW.
Good Inspection Skill In Welding, Piping & NDT Activities.
If you don't have a resume use the following information below as a template.
SUMMARY OF QUALIFICATIONS:
------------
Mechanical & Machine Operator.
(Faculty of Engineering and Technology in Bharathithasan University, India.)
General Engineering and Industrial safety in higher study.
CSWIP A 3.1 (Certificate no:27354)
ASNT Level II in DPT, MPI, RT and UT. (Valid up to 2009)
Total quality management system & ISO 9000 (NILEM) will complete on April 2007
------------
OBJECTIVE:
------------
(1) Upgrading Of Oil Gathering Center (GC15) in KOC (Kuwait).
(2) 1000mw Gas Turbine Power Project (MEW) in Kuwait. (8 x 125mw).
(3) OLEFINS II Infrastructure - U/G piping in Equate (Kuwait).
(4) Extend of crude Export facility in KOC (Kuwait).
(5) Hazop Recommendation in Kuwait National petroleum company.(Kuwait)
(6) In progress: Facilities Modification Project In KOC¡K (Kuwait)
------------
WORK EXPERIENCE:
------------
„« Preparation of Quality Assurance Plans (QAP) and Inspection and test Plan (ITP).
„« Preparation of Fabrication, Erection and Assembling Procedure as per the Standards and Project Specification.
Preparation of NDT Procedures and Coordinating with NDT Activities.
Preparation of procedures like Hydrogen beck-out, coating & wrapping, painting, PWHT & ETC¡K
Submission of Final QC Dossier as Per the Project Specification
Preparation of WPS, PQR as per the standards and Project Specification.
Conducting Welder Qualification Test.
Fit-up Inspection as per Approved WPS and PQR.
Worked in FRP, GRP, RTRP, FBE Pipes.
Weld visual Inspection as per Standards.
Interpretation of Radiography film
Monitoring of Electrode backing, welder's activities in site.
Monitoring of welder, collecting the daily welder report and repair detail records maintaining.
Monitoring the joint control system, offering the RT request, colleting the RT progress and doing further repair re-shoot offering.
Inspection of line checkup and Erection Clearance as per the Project Specifications.
Package Preparation for Hydro test, service test and pneumatic Test.
Witnessing & Inspection of Hydro test, service test and Pneumatic Test.
Witnessing of pigging Test, Blowing & Flushing Activities.
Inspection of stress free, torque tightening and cleanliness
Organizing the shutdown work and Commissioning work.
Inspection of valves and testing.
Preparation of preliminary as built isometric drawings.
Material receiving inspection as per the standards and specification.
Inspection of hot, cold insulation and cladding works.
Performing and inspection of RT, UT, DPT, MPI, Hardness Test, Vacuum box Test, Thickness measurement, Ferrite Test and Positive material identification.
Inspection of peaking, banding & nozzle alignments inspection in Tank.
Inspection of Level Indicator and over flow Activities.
Settlement reading after filling test in steel tank.
Inspection of sand blasting and Painting.
Inspection of wrapping & coating.
Inspection of holiday detection.
Inspection DFT, WFT and thickness inspection of piping system.
Inspection of crane and lifting instruments.
Inspection of Pumps & Skid Alignments.
Assembling and Inspection of Hydraulic Instruments
------------
EDUCATION & CERTIFICATION:
------------
Mechanical & Machine Operator.
(Faculty of Engineering and Technology in Bharathithasan University, India.)
General Engineering and Industrial safety in higher study.
CSWIP A 3.1 (Certificate no: will Be provided on march¡¦07)
ASNT Level II in DPT, MPI, RT and UT. (Valid up to 2009)
Total quality management system & ISO 9000 (NILEM) will complete on April 2007
------------
ADDITIONAL INFORMATION:
------------
ASME Section IX, Section II
ASME / ANSI B31.1 & 31.3
API 1104
Related ASTM and NACE standards. Knowledge in MEW, KNPC & KOC procedures.
------------
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 2201 to 2250 of 6411)
Go to Search Parameters...
Brief Description
Having eleven years experience in field of Oil , Gas & Petrochemical industry
Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3
Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.
Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems
Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.
I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.
Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.
Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced
Development, maintenance and utilization of the full field reservoir simulator
I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.
Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.
PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.
•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,
Drilling supervision and engineering, well control instructor, rig commessioning
Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects
Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.
10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.
SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.
Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.
TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET
Welding Inspector
Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.
I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.
Project Management
Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.
Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation
22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba
SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.
Senior Piping Designer PDS
Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.
Rig mechanic, mechanic supervisor, motorman, diesel mechanic
Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer
Mechanical Maintenance Engineer/contract and Procurement Engineer
Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat
QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.
Quality engineer in offshore and onshore fields
Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)
Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530
Electronics Technician / Telecom / SATCOM / Electronic Tools
Specialised in PROJECT & PRODUCTION MANAGEMENT ,QUALITY , MANUFACTURING, HSE
Proficient in CAESAR II, Korf Hydraulics, AutoCAD, Primavera and MS Office.
ESSAR OIL LTD- FCCU (May 2005 to May 2008)
18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.
B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools
Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.
Petroluem Engineering
Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)
Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems
Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard
2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
[ 45 ]
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com