Resume - Senior Offshore Structural Engineer

Misco Jobs

Resume #56483

CONTACT INFORMATION:
View contact information...

NATIONALITY Indian
PROFESSION Offshore Senior Structural Engineer

QUALIFICATIONS Post Graduation (M.Tech) in Geotechnical Engg. from Indian Institute of Technology(I.I.T), Bombay, Mumbai (INDIA) in 1996.

Graduation (B.E) in Civil Engg. from Jadavpur University, Kolkata (INDIA) in 1993.

PASSPORT NO. F 3045801 (Valid Up to Year 2015)
DATE OF BIRTH 23rd December, 1971
MARITAL STATUS Married and having 7 year old Daughter

KEY EXPERIENCE Over 12 years of Postgraduate Experience in Oil & Gas industry (Offshore/Onshore) and Civil engg. in the capacity of Senior Structural Engineer / Geotechnical Expert for the projects located in South China Sea, Arabian Gulf, Black Sea and Gulf of Mexico.

SUMMARY OF EXPERIENCE

„« DETAILED DESIGN / ANALYSIS OF OFFSHORE STRUCTURES
* Extensive hands-on experience in all stages of Design Engineering (Conceptual / Preliminary (FEED) / Detailed Engineering) of Offshore Structures
* Computer Aided Analysis & Design of Jackets, Topsides, Helidecks, Pile Foundations, Mud mats, Sea-fastenings, Piping/Equipment Supports, Lifting Pad Eyes, Trunnions, Tubular Joint Design, Cathodic Protection System and preparation of fabrication drawings
* In-place, Fatigue (Deterministic & Spectral), Earthquake, Load-out, Transportation, Lift (Offshore/Onshore), Un-piled Stability Analyses of Offshore Structures
* Structural Assessment and Modifications of Existing Offshore Platforms
* Thorough & Fluent Working Knowledge with Structural Software SACS 5.2 (SP-2), STRUCAD*3D, USFOS, STAAD -PRO
* Detailed Pile Drivability Analysis with GRL-WEAP 2003
* Conversant with Structural Design Codes/Standards API (WSD & LRFD), AISC, BS, DNV Codes & Standards
* Preparation of Design Basis, Specifications, MTO/WCR, Installation Procedures, Structural Drawings, Technical Project Reports, Detailed Design & Analysis Reports
* Offshore Site Surveys for Data Collection and Verification

„« PROJECT MANAGEMENT
* Preparation of Project Schedules, Man Hour & Cost Estimates, Weekly Progress Reports
* Maintenance of Document Control Register, Scheduling and allotment of Man Power
* Technical Assistance to Construction Activities
* Basic Technical Assessment of Bid Documents; Meeting with Clients/Contractors to ensure compliance with technical specifications & requirements
* Leading a Team of Engineers and Designers as Senior Structural Engineer

„« SOFTWARE SKILL SET
* Structural Analysis & Design: SACS 5.2 (SP-2), USFOS, STRUCAD*3D, STAAD PRO, GRL-WEAP 2003 Software
* Packages: MS Office, MathCAD, MATLAB, AutoCAD 2000
* Operating Systems: Windows XP/NT/2000, DOS, UNIX
* In-depth knowledge of Microsoft Excel: Writing of Spreadsheets for different Structural Engineering Applications using Excel & VBA; Project Automation
* Report writing / Presentation preparation using Microsoft Word / PowerPoint

DETAILED WORK EXPERIENCE

(August'07 to Present) Ranhill WorleyParsons Sd. Bhd, Miri, Sarawak, Malaysia (www.worleyparsons.com)

Position: Senior Structural Engineer (Oil & Gas Division)

Sarawak Shell Berhad: Structural Integrity Reassessment of Jacket/Substructure & Topside for South Furious LLP Compressor platform (On-Going)
Two 4-legged jacket platforms are located in South Furious field in South China Sea. Combined Lube & Gas Cooler, LLP Compressor, Suction & Discharge Scrubber need to be installed on the cellar deck level on SFK-A platform and two pumps at the main deck level for SFP-A platform. There is a connecting bridge between SFK-A and the drilling platform SFDP-A, which also has a new set of pipe lines running on it.
Responsibilities Include-
- Detailed In-place Re-Analysis of the existing platform
- Structural Integrity Assessment of the Topside
- Structural Integrity Assessment of the Substructure
- Detailed design of Pad-eye, temporary structural supports
- Preparation of Construction scope of work
- Preparation of construction/Installation Drawings
- Structural Integrity Assessment of the connecting Bridge

Petronas Carigali Sdn Bhd: Structural Integrity Assessment of BNDP-B Platform for Baronia IWAG Pilot project ( Aug'2007)
The 8-legged jacket platform is located in Baronia field in South China Sea. It has got three decks namely cellar deck, main deck and helideck. A new set of equipments necessary for water injection are to be installed on the main deck.
Responsibilities Include-
- Detailed In-place Analysis of the existing platform (Topside & Substructure)
- Structural Integrity assessment of the main deck & Deck Strengthening
- Check the pile capacity for new set of imposed loading of total Water Injection Package

(Oct. 2005 to Jul'07) WS Atkins & Partners Overseas ¡V Sharjah, U.A.E (www.atkinsglobal.com)

Position: Senior Structural Engineer (Oil & Gas Division)
Qatar Petroleum- Detailed Engineering of New Boatlanding in PS-2 & PS-3 Fields in Arabian Gulf

Six (6) nos of existing old boat landings of the existing jacket platforms shall be dismantled and replaced with new boat landing structures with enhanced facility of handling boat impact loads corresponding to a vessel of 2200 MT design displacement. Structural Adequacy of the connecting jacket members and boat landing supports shall be also checked to ensure structural safety and stability.
Responsibilities Include-
- Detailed In-place Analysis of Boat landing structure using SACS 5.2
- Progressive Collapse Analysis of Boat Landing Structure
- Checking the Local Structural Integrity of jacket legs at Boat Landing Supports and other Boat Landing Connections
- Lift & Transportation Analysis of New Boat Landing Modules
- Deterministic Fatigue Analysis of Boat Landing

McDermott- Saudi Aramco Jackets & Decks. ¡V March (2006)

Detailed Engineering/Design for Two (2) numbers of Well Head Jackets and Four (4) PDMs (Topsides) to be installed for Saudi Aramco.
Oil field located in offshore Arabian Gulf with water depths of 34.3m & 48.0m with 10 conductor wells, risers & J-tubes. The production platform consists of 4-legged Jacket and Production Deck Module having 5 decks (Main, Well Access, Lower & Upper Mezzanine, Helideck) with process, piping, mechanical & electrical equipments. The jacket legs are battered in two directions and supported on driven piles up to a max. depth of 55 meters.

Responsibilities Include-
- Detailed In-place Analysis of Jacket and Topside using SACS 5.2
- Determination of Pile Penetration based on Ultimate Pile capacity under different conditions namely Operating, Storm Environments, Boat Impact, Pile Pull-out case
- Offshore and Yard Lift Analyses of Jacket and Topside; Design of Lifting Aids ( Pad Eyes, Trunnions etc)
- Transportation Analysis of Jacket & Topside and Design of Sea-fastenings
- Spectral Fatigue Analysis of Jacket structure
- Analysis & Design of Boat-landing
- Design of Anodes (Cathodic Protection)as per DNV RP B401:1993
- Analysis & Design of Helideck as per API RP 2L & CAP437
- On-bottom (Un-piled) Stability Analysis of Jacket Platform
- Design of Mud Mat, Stiffeners & Plate
- Design of all Primary & Secondary Steel components
- Design of Walkway against Vertical & Horizontal Wave Slamming
- Design of Stairways in Wave Zone

SASB Offshore Tripod Jacket & Deck for Toreador Turkey Ltd. ¡V Turkey Black Sea (Jan 2006)

Oil field located 18 km offshore black sea with a water depth of 78m and with 3 conductor well. The unmanned well head platform consists of deck with process and piping equipments at three deck levels supported on a tripod jacket. The 2 legs of jacket are battered and supported on a driven skirt piles and third leg is vertical with pile and one of the conductors inside.
* Performed activities as Senior Structural Engineer and Geotechnical Specialist
Responsibilities Include-
- Conceptual Design of the Jacket and the Deck
- Detailed Engineering for Jacket and Deck
- In-place Analysis of Jacket and Deck Structure integrity of the platform by SACS
- Seismic Analysis for the platform using SACS Dynamic Response Module
- Dynamic Spectral Fatigue Analysis of the Tripod using Wave Response Spectrum
- Installation Engineering ¡V Lifting, Towing, Floatation & Upending Analysis, Un-piled Stability Analysis
- Detailed Pile Drivability Analysis (Bearing Graph, Drivability & Inspection Chart) using GRL WEAP 2003 software
- Checking the adequacy of the hammers available with the contractor and Recommendation of continuous driving at certain specified depths to avoid soil set-ups and early refusal (i.e. Under-drive)
- Comparative study of GRL WEAP Drivability results with the site results of dynamic Pile test; Subsequent selection of Gain-loss factors; Prediction of Soil Resistance to Driving for other piles in the same field.
- Development of P-Y, T-Z & Q-Z Curve for Non-linear analysis of pile-soil interaction using SACS PSI Module based on API and ICP methods.
BUNDUQ Oil Co. Ltd, Abu Dhabi (2005-2006)
Detail Engineering for the modifications associated with increasing the accommodation capacity by about 20% (projected capacity - 145) and other related facilities on the offshore Living Quarter Platform (LQP) in El Bunduq Complex in Abu Dhabi Offshore.
* Performed as Senior Structural Engineer
The specific work carried out included the following activities:
- In-place & Lifting Analysis of 3 nos. Accommodation Modules;
- Lifting Analysis and Design of Pad Eyes
- Modifications inside the LQP Module to convert some rooms to bed rooms and expand the kitchen, dining & toilet facilities.
- Preparation of Design Basis, Specifications, Drawings and MTO's for Structural & Architectural Modifications
- Preparation of Scope of Work for Construction Contractor, Cost Estimate & Project Schedule

Gulf Piping Company (GPC, Abu Dhabi/Qatar Petroleum Development (QPD), Qatar (2005)

Full Field Development of Al-Karkara and A-North: Detailed Engineering & Design for Offshore Facility Construction.
* Performed duties as Senior Structural Engineer
The specific work carried out included the following activities:
- Detailed Engineering/Design for Two Number, 3-Legged Well Head Platform (KK-1 and AN-7) and One Number, 4-Legged Compressor Platform (GIP)
- In-place & Fatigue Analysis of KK-1, AN-7 and GIP Jacket Platforms
- Lifting Analysis (Jacket and Deck) and Un-Piled Stability Analysis of KK-1, AN-7 and GIP Jacket Platforms
- Design of Boat Landings for KK-1, AN-7 and GIP Jacket Platforms
- Design of Secondary Steel for all the above platforms
- Checking of all AFC Drawings produced by the Designers
- Design of all Installation Aids

(2000 to 2005) Zentech India Offshore (www.zentech-usa.com) at their Mumbai office, INDIA. Zentech has its head office at Houston, Texas, USA.

Position: Senior Structural Engineer
Work Experience with Jacket Platforms located in the Gulf of Mexico (GOM)
The scope of work involved:
- Computer Aided Design and Analysis of Offshore Jacket Platforms
- Geometric Modeling & Environmental Load Generation (Storm & Operating) using StruCAD*3D software
- In-place Stability and Dynamic Spectral Fatigue Analysis
- Non-linear Wave and Seismic Pushover Analysis using USFOS software; Calculation of Reserve Strength Ratio (RSR) of jacket platforms
- Damage Pushover / Redundancy Analysis and Calculation of Residual Influence Factor of Jacket Structure
- Transportation Analysis of Jacket Structures; Design of Sea Fastening
- Leading a group of Draughting Personnel / Designers
- Preparation and Compilation of Detailed Design report
- Load and Stability of Spars, Jack-up and Semi-submersible rigs.
- Evaluation of API soil curves (T-Z, Q-Z, P-Y curves) to idealize soil stiffness for offshore piles as geotechnical expert
- Thorough knowledge of Pile-Soil interaction for offshore structures and expertise in interpretation of laterally and axially loaded pile behavior for offshore structures with detailed familiarity with international API and DNV Codes.

LIST OF SOME SELECTED PROJECTS
* Name of Project: Re-assessment Study of Jackets (8 legged & Tripod) in Gulf of Mexico
* Client: Petroleos Mexicanos (Pemex), Mexico

Detailed Structural Re-assessment of 8-legged Jacket Platforms with 3-Level Deck Topside located in AKAL-M field of Gulf of Mexico and Tripod Platform located AKAL-H field of GOM having water depth in the range of 50m to 60m.

* Name of Project: Set-up of stability program for Jack-up rigs
* Clients: Arab Drilling Corporation, Lamprell at Dubai

Providing Stability Calculation of Jack-up during Ocean Transit, Offshore Drilling Operation

* Name of Project: Set-up of stability program for Spar, Semi-submersible
* Client: Noble Drilling Company, USA

* Name of Project: Weight Management System for Spar rig
* Client: British Petroleum, Kerr McGhee, USA

* Name of Project: Transportation Analysis for Topsides on Barges
* Client: Petroleos Mexicanos (Pemex), Mexico

Detailed Transportation Analysis of 4 Deck Topside and Design of Sea Fastening for AKAL-G field in Gulf of Mexico.

* Name of Project: Load out analysis and sea fastening design of bridge And flare boom structure
* Client: Damus Limited

1996-2000 STUP Consultants Limited (www.stupworld.com) at Mumbai, INDIA
Position: Senior Design Engineer and Specialist Geotechnical Engineer.

The gamut of works involves:
* Structural (Reinforced Cement Concrete) and Geotechnical design of all sorts of foundations (Shallow and Deep), Bridge Piers
* Field supervision of soil exploration in a no. of highway, bridge and ground improvement projects on behalf of consultant.
* Detailed analysis of soil investigation reports, engineering interpretation of all soil parameters, adoption of suitable geotechnical parameters for the analysis and design of shallow (Isolated, Combined, Raft footing) and pile foundation (bored cast-in-situ as well as driven piles).
* Geotechnical (in terms of calculating ultimate and working load carrying capacities) design of pile, its structural design using STAAD III software
* Stability analysis of highway embankments using self-developed computer programs for the prestigious project like Mumbai-Pune Expressway
* Ground Improvement scheme design (in terms of Band drain / Sand drain / Stone Columns) for embankment on weak soil (Mumbai-Talasari Expressway)
* Design of grouted rock anchors for the rock slope stabilization at Kalachowky, Mumbai
* Analysis and design of RCC / PCC earth retaining structures in a variety of field situations (horizontal and inclined backfill)
* Analysis and design of Box / Portal culverts resting on weak foundation soil

OFFSHORE VISIT EXPERIENCE:
* Visited & conducted extensive site surveys of the following:
o Jacket platforms of Bunduq Oil Co. Ltd. in Abu Dhabi offshore, UAE.
o Jacket Platform in PS-2 & PS-3 Oil Fields in Qatar Offshore ( Qatar Petroleum)
* Attended Offshore Safety Training courses by Bunduq Oil Co. Ltd.
* Successfully completed Offshore Sea Survival Training, Helicopter Under Water Escape using EBS, Hydrogen Sulphide Safety training and Shell Permit to Work in a 6 day long comprehensive training course conducted by SMTC Global Services,Malaysia (Year 2008)

COMPUTER PROFICIENCY:
* Operating Systems: Windows, MS-DOS, UNIX
* Programming Languages: MS Visual C++6.0, Digital Fortran 6.1A, OPENGL
* Structural Analysis/Design Packages: SACS 5.2, StruCAD*3D, USFOS, STAAD-PRO, GRL-WEAP 2003
* Additional Software Packages: MS Office, MS Project, Power Point, AutoCAD, MATLAB

STRENGTHS:
* In-depth knowledge of Structural Analysis & Design of Offshore Structures along with Specialist Expertise in Geotechnical Engg.
* Excellent Communication (Verbal & Written) Skill in English
* Co-operating Team-man
* Inspiring Leadership Skill to lead a team of Junior Engineers
* Continual Pursuit of Quality in Assignment and task

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 6519)

Go to Search Parameters...

Brief Description

Overall Exp. 14+ years.

Positive, self-motivated and results-driven, a proactive and confident professional with extensive expertise gained in an environment where accuracy and attention to detail are vital. Capable of utilising resources, both human and material, to streamline workflow and achieve time-sensitive deadline

Condition monitoring engineer, rotating machinery engineer, mechanical engineer, maintenanace engineer

Reservoir Engineer with proven record of accomplishments. Extensive experience in pressure analysis, property evaluation, reserves determination, operations, and computer modelling with a skill for enhancing company value. Proven ability to find additional reserves where others have already looked.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Geoscientist with over 20 years experience with major oil companies in Europe and South America in exploration, production and business development projects.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

20 years of experience in the field of computer s/w and h/w

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

. I have sixteen years refinery experience for four location – Texaco Port Arthur, Basis petroleum Krotz Springs - Louisiana, Basis petroleum Houston – Texas and Basis petroleum Texas City refinery. Basis petroleum has been acquired by Valero in 1997.

Supervise small and mid-sized projects involving maintenance/rehabilitation/repair of pipelines and piping systems, good experience at piping equipment selection and sizing, experience with pigging facilities design, experience at pipeline pigging, fluent in English, French and Arabic

INSTRUMENTATION ENGINEER

I&C ENGINEER. ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING

Technical / Lead Safety Engineer

NDT inspector LVL II

M.E in Instrumentation Engineering with 16 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

Senior Instrument engineer with more than 13 years experiences in Oil, Gas, petrochemical and off-shore fields

Free! Lead/Senior Piping Designer

Sr. PDS Piping Designers / Design Piping Engineer

Senior Offshore Structural Engineer

17 years of experience in piping design & stress analysis with Enppi, Ansaldo Energia, Brown & Root and Dar Al-Handasah.

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

XRF, AAS,particle analysis, catalysts(nickel, chromium),Adsorbents(Zinc Based),Water analysis, UV-VIS spectrophotometry, Winlims administration, Training

Piping Field Engineer – Technical Office

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Looking for a job where I can use my talents in the area of Petroleum Engineering and/or Application and System Programming for solving problems

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

Acquisitions. Over 20 years of experience in all phases of reservoir engineering with emphasis on economic analysis, acquisitions and divestitures, reservoir characterization, mature field optimization, and reservoir management and exploitation.

SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Business Analyst Technical Writer Project Manager Programme Director

Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered.

Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries.

Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries.

SAS and COBOL Programmer with DB2 and SQL experience

My experiences have included not only involvement in reservoir engineering , but also having a broad field experiences with an understanding of operations and proficiency in computer reservoir applications.

OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation

Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams.

Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions.

PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports

OFFSHORE STRUCTURAL ENGINEER, JACKET ,TOPSIDE, FPSO STRUTURE DESIGN EXPERIANCE

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out