Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #57073
next resume »»
CONTACT INFORMATION:
With over 25 years experience in the Civil, Power, Mining, Petrochemical Commercial and High-Tech Divisions of the electrical industry, complimented with a working knowledge of the National Electric Code to perform Journeyman level work in a craftsman like manner.
* Extensive experience in all stages of electrical and instrumentation construction and methods, As a Supervisor or an electrician. From ground grids and underground conduits to the above ground layout of conduits, cable raceways, fabrication and installation of Electrical systems, service equipment and instrumentation. Utilizing various voltage's from: 4-20 milliamp instrumentation to 220 Kv sub-stations and inner-connect facilities.
* Extensive supervisory experience in Design Build projects and Shutdown Outages comprising of on the spot, real time decision making and field engineering. Working with Electrical and Instrumentation Engineers, submitting appropriate as-built drawings and submittal reports and other verifiable documentation to keep the project flowing and on schedule.
* Supervisory experience in the Start-up and Commissioning of a project. Responsibilities include: Document control, Megger reports, Instrument calibration and loop check documentation, Pre task Safety and System analysis completion reports. Client turn-Over over reports. While always working with the Project manager, Client, Vendor and or Factory representative in the U.S. and abroad for the management and productivity of personnel and equipment, maintaining safety and quality a number one objective.
* Extensive experience in regards to safety, that all personnel take a safe and prominent role on a project. That all pre-task forms are filled out and reviewed by all crafts involved in work on a system, in order to pin point possible safety issues and hazards, possible equipment hazards and impacts to better protect personnel and equipment from injury and damage.
* Extensive experience as an Electrical Superintendent providing detailed daily progress reports to the Project Manager and Client. Having to interface with various other Craft Supervisors to provide accountability and acceptance for project dead lines and Completion Turn-Over Packages. Experience with tracking time and labor cost, Managing personnel, ordering tools, materials and equipment. Scheduling man power task to keep the project on time and on budget.
* Extensive experience in the supervisory of and the installation, termination, troubleshooting and maintenance of specialty A. C. voltage systems, both utility power and diesel generator supplied power comprising of Voltages from 11kv, 5kv, 2.3 kV power distribution centers to 480 volt Motor control centers. Variable frequency drives and D.C. voltage systems such as: Variable speed drives, uninterrupted power sources (battery and diesel Generated supply).
* Experience in Programmable Logic Control, DCS and SCADA Systems.
* Past experience in the calibration, testing and loop checking of Instrumentation and controls for a project.
* Experience in working with the United States Military, operating in Central Asia and in the Middle East. Working on multiple State Department Communication projects, Logcap and Afcap Force protection projects. Providing electrical services and support from 11kv thru 220 volt systems. Providing a better quality of life for our Armed Forces deployed in overseas operations.
* Experience in working with and directing Expats, Third Country Nationals and Local Nationals in the installation and repair of these electrical services.
* Electrical and Instrumentation Education is as follows:
4 year electrical and instrumentation Classroom and OJT apprenticeship.
40 hour OSHA 500 (HSE) classes.
High Voltage cable splicing classes.
Multiple Supervisory and management classes.
As it stands, I average 16 to 24 hours per year of Class room and Lab time to maintain all electrical licenses. Just to name a few and as stated in my cover letter, these classes very from Electrical safety classes, NEC code change classes, Electrical and Instrumentation design classes, Electrical calculation classes, Process flow and instrumentation classes. Over the years I have logged many hours of education to keep me current and marketable in today's electrical Industry and in a global market.
Recent Previous Projects;
* 2007- 3/2005.
Company: MCI/ Verizon.
Primary task as Senior Electrician was to install and maintain over 30 Cellular Sites comprising of 2 different government contracts through out the whole of Iraq and all of Baghdad. Secondary task was to build and provide MEP services for two man camps located in the Victory/Biap area.
* 4/2005-4/2004.
Company: RMS.
Primary task was to build and maintain 11Kv power infrastructure for Camp Cook Iraq. Work comprised of the installation of eight 1.2 Meg diesel 11 Kv generators Control and Sub-Station, Overhead transmission lines and 11Kv – 400 volt ring mains.
Secondary task was to provide electrical services Base wide comprising of voltages from 400 volt – ¼ milliamps.
* 4/2004-4/2002.
Company: Electrix.
Primary task as an Electrical Supervisor was to manage up to 40 Electricians for ongoing 2 million dollar capital projects for a major pulp and paper mill located in Camas Washington.
* 4/2002-4/2000.
Company: Kelly Electric.
Primary task as an Electrical Supervisor was to manage up to 80 Electricians for various projects including a major paper and pulp mill located in Lake Oswego Oregon and a major Aluminum Smelter located in Dalles Oregon.
* 4/2000- 6/1979. Multiple projects as an Electrical Supervisor and as an Electrician serving the Power, Civil, Petrochemical, High- Tech and Commercial Industries.
«« previous resume
next resume »»
Search Results (Resumes 1 to 50 of 6807)
Go to Search Parameters...
Brief Description
Free!
Don Westacott Chief Petrophysicist reservoir characterization and development of conventioanl and unconventional oil and gas reservoirs within US domestic and global sedimentary basins.
Free!
Petroleum Engineer with 12 years of progressive experience gained from active involvement in all phases of oil and gas exploration and production(Deep Water and Onshore. Vast experience in Well and Reservoir Surveillance, Integrated Production Systems Modeling, Production Engineering and Technology
Free!
Planning / Scheduling,Project engineering,Subcontracts administration,Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Free!
I am an experienced exploration consultant, advisor, manager, educator and research scientist. I have extensive experience in exploration play, prospect and basin risk analysis and in designing exploration strategy and organizational structure
Free!
Experienced Supervisor in the Electric Submersible Pump Industry
Free!
As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.
Free!
A Professional Engineer with more than 27 years oil & gas experience. P. Eng Status current
Free!
If you are seeking a project expert in the energy, oil, and gas industries, who brings a comprehensive background beginning in on-site project management, and expands into in-country executive, driving new business, contracts and client relationships. I would be an excellent candidate for your consi
Free!
HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing
Free!
I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.
Free!
Helicopter view, fast analysing, creative in finding solutions, mind setter for safety
Free!
I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis
Free!
Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.
Free!
19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.
Free!
Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.
Free!
Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,
Free!
15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.
Free!
E&I Supervisor with 28 years service in all divisions of the electrical industry
Free!
Good communication skills, Able to work with no supervision. Self Motivated,team leader. Extensive organising,work prioritisation and related Skills. Proficient using Maximo and Federal Supply System. Knowledgable with Excel,Microsoft Access,Windows Xp
Reservoir Engineer, Heavy Oil Recovery, EOR, Production Optimization, Simulation Studies
Lead process engineer
Twenty years instrument and control systems experience includes positions as: lead instrument and control system engineer on onshore and offshore design and construction projects for oil and gas plants, refineries, pipelines and chemical plants
I am NACE Certified corrosion specialist, fellow member in the institute of corrosion. I have BSc and MSc in chemical engineering and PhD in corrosion engineering with long experience in R&D, oil and gas industry.
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
20 years experience in drilling/work
Experienced geologist
Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP
Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering
Ammonia, LPG/LNG, freon, electrical and water systems
I am Nace certified Coating Inspector Level 3 & ACA Certified Corrosion Technologist . My basic qualification is B.Sc.( Che), Mechanical Engineer I am having Total 24+ yers of experience in the field of Coating. 10 years in Oil & Gas Inspection on offshore & Onshore
Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms
21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.
21 Years Experience of Process Engineering in Refinery/Oil & Gas
A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.
Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager
My skill in maintenance and repair of heavy equipments,compressors and pumps
Reserve Management, Project Economics,Exploration Risk Analysis, Acquisitions
I exerted with different degrees the most of geophysicist tasks and particularly the supervision of seismic processing and interpretation projects. I am particularly interested in the static corrections in dunes areas. I have a personal work on the subject that has yielded good results
Petroleum Geologiwst, oil and gas exploration and production, geologic mapping
Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.
Engineer - Geologist of Oil and Gas Exploration
Senior Production Technologist
I hold the B. Sc. and Master’s degrees in Geophysical Engineering from Polytechnic University of Tirana (1977), Albania. Thirty years of diversified experience in well logging, administrative projects, and quality control. Providing petrophysical support to the integrated study
30+ years of EPC and consultancy Process experience. Conceptual design, Simulation (Hysys / proII) of oil & gas and refinery processes. Expertise in oil & gas gathering stations, gas sweetening, dehydration; Water treatment and injection systems; NGL units employing Turbo-Expanders; Refinery units.
More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields
Experienced on all refinery products and intermidiates. Competent assessor for ISO 17025
Indian, working for U. S. Dollar Seven hundred twenty million hydro-carbon handling project in NIGERIA and received excellent employee award Seeking Director / ManagerHSE/Environmental/Civil Education: Ph.D. (IIT Bombay) and Safety Diploma
Designing , Praparation & Checking of high pressure transmission pipelines
„w Trained competence through training in Electrical Design Software Analysis (EDSA) and Project Management Techniques
Petroleum Reservoir Engineer,
First
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com