Resume - Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in b...

Misco Jobs

Resume #57449

CONTACT INFORMATION:
View contact information...

EDUCATION AND QUALIFICATION:
-UNIVERSITY STUDIES:
2004-2005 Master's with Distinction, University of East Anglia, Norwich, UK
1993-1997 English Language Teaching at the Foreign Languages Institute /
University of Ouargla.
-Degrees: MA degree 2005, UEA, UK; BA in English June 1997, Algeria.
-FOREIGN LANGUAGES: - Fluency in both spoken and written English.
-Very good command of French.
- Arabic ; mother tongue
-TRAINING:
o ER1 Refresher Training & qualification, Stirling Ltd. UK, Oct. 2006.
o Emergency Response and First Aid Training, ER1 Qualification, Stirling Ltd. UK, April 2004.
o Scientific Translation, 2nd International Conference on Specialized Translation, February – March 2002, Barcelona, Spain.

* PROFESSIONAL EXPERIENCE:
Oct. 2003 – Present
Amerada HESS
El Gassi Oilfield Development Project, Algeria
Health Safety & Environment Advisor:
* Serve as HSE Advisor and principal contact for business management and provide technical support and coordination.
* Track each recordable safety incident with the drilling contractor to ensure the proper closeout of investigation findings.
* Conduct rig safety inspections and safety system audits of the drilling contractor operations.
* Roll-up and analyze drilling specific HSE data and make recommendations for improved performance.
* Implement, facilitate, administer and document HSE training.
* Conduct HSE audits and routine safety inspections to ensure compliance with stated polices and procedures.
* Serve as HSE advisor and principal contact for drilling management.
* Ensure that the local HSE support system provided by the organization is in place and operating effectively within the various operations.
* Conduct daily, weekly and monthly safety meeting and edit minutes and reports for the HSE and Drilling Managers.
* Conduct / facilitate training for rig crew and supervisors.
June 2001 - Sep.2003
ABB Lummus Global/Petrofac
BHPB Ohanet Development Project, Algeria
HSE Training Assistant:
* Conduct Site Safety Orientations to new mobilized employees, both local and expatriate.
* Ensure translations of technical safety procedures documents and interpreting during training classes and meetings, both at office and on site.
* Adopt and design training materials (MS PowerPoint) for specific safety subjects as per site regulations and the OSHA requirements.
* Compile data and draft accidents / monthly reports (Charts, logs, and statistics) to be submitted to the HSE Manager.
* Assists in Accidents/ Incidents Investigation by witness statement collection and scene simulation.
* Familiar with Accident /Incidents Record-keeping as per OSHA Rules and Regulations.
* Knowledgeable with Health, Safety and Environment requirements as well as applicable provisions in the Local Law Regulations.
* Coordinate with Materials Dept. and assist in the selection of safety materials in conformance with applicable OSHA standards.
* Promote safety culture throughout site by means of on-site designed posters, flashes, alerts and banners.
* Edit meeting minutes.
* Support the HSE Department personnel and ensure communication and feedback with other departments as well as subcontractors including translation and interpreting.
* In charge of all Safety Department clerical tasks.

Feb.-May 2001
Nabors Drilling International
Multinational oil company.
Hassi Messaoud

HSE Co-ordinator: Duties include
* Supervision of Base Security Force.
* Conducting inspection and audits and report findings to the HSE Manager. Translation and interpreting duties.
* Coordinate and ensure communication between Company HSE Manager and the Military Support Unit Commanders.

Sep.1999-Aug. 2000
Military Academy Of Combined Arms in Cherchell. Tipaza.
Head of the English Language Department and teacher of English.

Sep.1998 - March '99
Brown & Root Int. Gas Expansion Project in TFT,
In-Amenas, Algeria
Escort Dispatcher / Interpreter:
* Responsible for interpreting and radio operating tasks
* In charge of the management of escorts and mediation of talks between the Security Manager and the Commander of the Military Support Unit.
Ensures the daily management and periodic inspection and maintenance of company escort vehicles fleet (Twenty-four "4x4" Land Cruiser Vehicles and thirty drivers).
* July - Aug. 1998: Census Agent at the General Census of Population and Housing in1998. Undertook the mission of localizing and registering scattered nomads for census reasons.
* Nov.1997-Feb.'98: Teacher of English at Rouissat High School in Ouargla.

* MISCELLANEOUS:
- Experience with Microsoft Windows and office Applications (Word processing / Excel / PowerPoint and Access) and familiarity with networks Internet and online databases and communication.
- Hands-on experience with warehouse tools and equipment.
- Founder member of a local association for the protection of environment January 2003
- Volunteer teacher of English in different summer schools (1994-'98).
- Board member of the English language Club at Ouargla University Center (1994-'97).
- Freelance translator of documents from English into French or Arabic.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 6411)

Go to Search Parameters...

Brief Description

Senior engineer (piping construction & mechanical installation engineer

•Installation, loop checking, Commissioning and maintenance of online Analyzers

Mechanical engineering (heat and fluids)

Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

With fourteen(14) years experience in Piping Design and Field Engineering Works of various Petrochemical, Oil Gas Plant from feed engineering up to detail design. Capable of checking of piping design up to IFC drawing and with experience of site engineering works.

electrical technician to repair n maintain all HV/LV electrical machines n equipment,testing them, trouble shooting and corrective maintemance.3 yrs diploma cource completed in electrical engineering.11 yrs experience in electrical jobs.result oriented n confidence in work.

Excellent organization skills

Over 8 years experienced on diffrent type of rig work over,deep and ultra deep rigs which done explratery wells. i passed the Diploma of Associate engineering in Mechanical. I done Engine overhaulling CAT D398 & Draw Works overhaulling.

1990 Diploma in Mechanical Engineering

I am Bachelor of Science in Computer Science and Engineering.working as a SCADA Engineer in PGCB about 5 years.

Process operator of Fluid catalytic cracking unit and Hydergen gereration unit

Subsea Installation Supervisor of wellheads, XT,s and completions.

Total experians 8 years instrumentation and control technician

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).

Experienced Supervisor in the Electric Submersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

Free! Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

Senior Chemical Integrity Engineer

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

Junior well engineer, Design engineer

Qualification: MSc Corrosion Control Engineering Experience

Instrument Engineer

Bachelor's in Commerce plus Mechanical Diploma

Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out