Resume - I am graduated in Petroleum &Gas engineering and have total experience in drilli...

Misco Jobs

Resume #57540

CONTACT INFORMATION:
View contact information...

Education
BE in Petroleum Engineering (Aggregate 80.56 % with first class 2nd position)
Mehran University Jamshoro-Pakistan, 2005.
Final Year Project
¡* Comparative Study of RFT & MDT Wire line Formation testing tools¡¨.

Experience
January 23, 2007 Orient Petroleum International Inc. Drilling Engineer
* Working as Drilling engineer with Orient Petroleum International Inc. Responsibilities include on-site Drilling Hydraulics optimization and close eye on a Drilling operation on directional Wells. Currently I am working on GWDC- Rig-173, with Power Rating of 2000hp, minimum lifting capacity of 500ton, rotary opening of 37-1/2¡¨ & Setback Capacity of 497klbs. This Rig utilizes three F-1600 Mud pumps (Equivalent to National-1600), manufactured by Bao Manufacturers. With this Rig we have successfully completed a Deep Deviated Well penetrated in Data Formation at the TVD of 17450 FT. Currently we are working on an other Deep well as re-entry to re-test and re-open the zone of interest.

January 01, 2005 - January 20, 2007 Mari Gas Company Ltd
Assistant Drilling Engineer
* Worked as Drilling engineer/Night Pusher on Company's own Skytop Brewster Rig. I completed a project of Drilling Of Three Wells penetrated in Pirkoh Lime stone. Project started on Dec 05, 2006 and completed on Jan 18, 2007. Drilling utilizes two mud pumps as; Oil Well - 350PT & Gardener Denver PZ-7. Oil well-350PT had 5¡¨ Liner size & 7¡¨ Stroke length, but for Pz-7 &¡¨ Liner with 7¡¨ Stroke length was used (As per Hydraulics requirements).
Rotary Opening was 18¡¨, well drilling profile was as: 20¡¨ Conductor, 13-3/8¡¨ Surface Casing, 9-5/8¡¨ Intermediate Casing & 7¡¨ Production Casing or in some cases liner.
* Worked as DST Supervisor for Hycarbex Well ¡* Al Ali-1¡¨, penetrated in Sui Main Limestone Formation.
* Worked as on-site Shift Engineer/Night Drilling Supervisor during drilling of Ziarat Exploratory Well-1 spudded on 28 Sept. 2005 and continued till 28th Dec. 2005. This was a hard-rock deviated well @ 15¢X in active tectonic stress area with shallow gas, mud losses, complex well control issues & High H2S concentrations.
* Worked as Trainee Engineer during Drilling/Completion of exploratory well, Mari SML-1, Spudded on 16th Feb & continued to 24th April 2005 by Schlumberger Rig-60.

Internships
OGDCL
* Passaki Oil Field - Well Operations / Production Facilities
* Workover of Passaki # 1 for Installation/Reversal of Jet Pump Facility

Mari Gas Company Ltd
* Involved in Maintenance of Company's own Skytop Brewster Rig
* Workover of Water Disposal Well

Computer Skills
* MS Office
* I have prepared a detailed Excel Sheet of Routine Formulas used During Drilling

Short Courses & Workshops
* Valid H2S Emergency Escape Training Certificate
Iftikhar Hyder Butt, Safety Engineer, Rutledge H2S, (February 2007).
* Directional Drilling Techniques
Mr. Riaz Ur Rehman Qureshi, Directional Driller, Baker Hughes INTEQ (January 2003).
* The Art of Mud Logging
Mr. Riaz Ur Rehman, Directional Driller, Baker Hughes INTEQ (Aug, 2003).
* Liner Hanger Applications in Pakistan
Mr. Sartaj Ali Shah, District Engineer, Baker Oil Tools (September 2003).
* An Integrated Approach for Prospect Evaluation Techniques
Mr. Tufail Ahmed, Operations Geologist, Mari Gas Company. (March 2003).
* Workshop on wire line logging
Mr. M. Nawaz Bugti, Expl. Geologist, Pakistan Petroleum Ltd. (Sep.2004).
* H2S Emergency Escape Training Certificate
Mubbashir Maqbool, Safety Engineer, Rutledge H2S, (November 2005).
* Positive Displacement Compressor Performance Optimization
Mr. Allah Baksh, Reliability Engineer, BP Pakistan (Mar 2006)
* Wire Line Logging and Interpretation
Mr. Masatoshi Nishi, Country Manager Schlumberger Pakistan (Jan 2005)

Publications
* Prepared ¡* Well Drilling Program¡¨ for deep exploratory Well drilled in Lower Indus Basin of Pakistan, Orient Petroleum International, 2007.
* Prepared ¡* Well Drilling & Completion Report¡¨ for three Wells, Mari Gas Company Ltd, 2007.
* Publication ¡* Impact of Hydrocarbons on Environment¡¨
(Annual Journal of Institute of Engineers Pakistan, Mehran Chapter-2003).
* Publication ¡* Design of Perforation Strategy on the basis of Flow Efficiency¡¨ (SPE-Mehran Student Journal 2003).
* Compiled a ¡* Manual of Internal Corrosion¡¨, Mari Gas Company Ltd (2006).
* Prepared a Detailed Study Report on ¡* Pipe Line Leak Analysis Techniques¡¨, Mari Gas Company Ltd.

Achievements and Distinctions
* Worked as Executive member of SPE - Mehran Student Chapter for year -2003
* Received SPE and PAPG Scholastic Achievement Awards for Year 2003 and 2004, respectively.
* Received 1st Place award in ¡¨Inter-batch Presentation Contest¡¨ arranged by SPE Mehran Student Chapter for year-2003.
* Received ¡* Best Member of the Month¡¨ award, from SPE, Mehran Student Chapter, 2003.
* Mehran University awarded four times meritorious scholarship.

Professional Associations
* Member, Society of Petroleum Engineers (SPE)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3351 to 3400 of 6411)

Go to Search Parameters...

Brief Description

14 YRS EXPERIENCE IN OIL & GAS FIELD IN INSTUMENTATION.

Seismic adquisition, oil data management, geology, mining management

My name is RAJENDRA T CHAVDA, I am INSTRUMENT TECHNICIAN, I have working exp. in this field more then 7.5 years. before i was working Russia and Abu bhabi (OFF SHORE) and India chem. and petro. chem Being given to understand from reliable sourse that thei

Supervisor, Quality, Process, wastewater

Instrument and Electronics Technician

SCADA Engineer

I am graduated in Petroleum &Gas engineering and have total experience in drilling engg & Drilling technology, such as Drilling engineer, Night Pusher & Night Company man.

13 years experience in the field of QA/QC, inspection, NDT, welding, painting, ISO, mech. equipments etc.

Chemical Engineer, PGDBM, Advanced Process Control Engineer (RMPCT,SMOC/RQE), DCS(Yokogawa CS3000, Yokogawa Centum XL, Honeywell TDC3000), Process Simulation

To take all the assignments as a challenge in order to uplift and maintain the goodwill. Dignity and growth of the concern that providing me knowledge, experience and growth of my career.

Extensively perform integrated study to generate reservoir characterization and geological modelling for field development plan within multidisciplinary team

Performed all troubleshooting, preventive and predictive maintenance on monitoring and control systems for petrochemical production operations. I can test, troubleshoot and correct production related processes through monitoring and control systems, safety standards in accordance ISO 14001.

As Reservoir/Petroleum Engineer, I have around 5 years of working experience with BP Pakistan E&P Inc. Earlier, I had done my Master's in Petroleum Engineering and bachelors in Mechanical engineering. Have excellent experience on the development of small oil and gas assets.

I am a well rounded geologist and am excited about applying my skills, as well as learn new ones, to the benefit of myself and my company. My MS is in structure and mineralogy from UNC Chapel Hill and my BS from SUNY Binghamton in geology with a concentration in geophysics as well as geomorphology.

-MS in Chemical Engineering -More than 3 years of experience in production and process upgradation with chemical process industry. -2 years of research experience in Natural gas processing -Proficient in CHEMCAD, ASPEN and HYSYS simulators.

Numerical/Experimental Study of Flow through Porous Media, Flow Visualization, Extensive C/C++, Matlab and Fortran programming experience, Production Engineering, Subsurface Modeling, Reservoir Engineering and Simulation, Production and Operations Engineering and Petroleum Economic Evaluation.

Objective: Career in Mechanical field, which affords an opportunity to utilize my qualification and join with a creative & innovative engineering team.

I have graduated with honours as a Bachelor of Chemical Engineering from The University of Melbourne. My desire is to put the diploma to use in the marketplace and to continuously learn new skills and improve existing ones.

Mechanical Engineer holding a Metallurgical and Materials Engineering Master of Science from the Colorado School of Mines, Golden, CO USA. Experiences in Automotive, Welding R&D, Welding Marketing. Eager to relocate and travel Internationally. Fluent in Italian, English, French and German

Objective: To seek a position as Field Engineer in Petroleum/Oil/Gas company

Seeking for Mudlogging job

B.Tech in Electronics Engineering with over 8 years of professional experience in SCADA, PLC System and Control Panel Design in UAE, USA, and India.

Experience in welding inspection for the past 14 yrs, onshore and offshore experience. Involved in fabrication of Offshore steel structures, Chemical plants, Refinery, FPSO Turret Fabrication, both structural/piping. Interpreter films, CSWIP certificates, Diploma in EWF, IIWI.

I am an extremely committed and enthusiastic post-graduate with a wide range of skills. I am keen to learn new things, accept new challenges and firmly believe I would be a valuable addition to your team.

High School Diploma A/B PLC 5, SLC 5/03 Wonderware HMI SCADA HVAC maintenance Generator maintenance Instrumentation technologies Electronics level 1 AC and DC drives Ross Hill SCR IPS SCR Instrumentation technologies Journeyman certificate (Alberta) With Red seal status

I am procurement engineer who have worked several years in oil and gas fields in middle east.

Dedicated and internationally experienced individual with a broad range of knowledge in engineering, finance, and consulting within the oil industry. Possesses a master's degree and five years of applied professional experience. Skilled in conducting economic portfolio reviews of various assets.

I am an Electrical engineer working as Sr. Engineer Electrical in Cairn Energy India Ltd, a UK based Oil and Gas Industry in India. I am having nearly 7.5 years of Maintenance experience in large petrochemical and Oil and Gas Industry in India.

Fourteen- (14) years experience of detail structural engineering in various on shore field which include oil refineries, gas treating facilities on shore platforms, well-head and inter-connection bridges, industrial building.

To acquire a Full time/Internship position as Natural Gas/Chemical Engineer that utilizes my logical, interpersonal and technical expertise

I would like to seek the new environment of working experience with the new culture religion, creativity and innovative which can increase my self-esteem to be a project manager in future.

Graduated this year from IT-BHU( chemical engg.)

More than 5 years of experience in office administration for domestic and international exploration and production corporations. Experience in geology and engineering programs. Strong background in user training and support documentation.

Finished mechanical engineering with 68%.software skills: autocad,solid works, catia v5, ansys

Electrical engineer with experiance in Testing, Quality, Maintanence

MINING ENGINEER and SUPERIOR TECHNICIAN OF HYGIENE AND SAFETY ON WORK

Over 18 years of proven expertise in Material Planning & Management, Negotiation, Procurement, Vendor Development, Logistics, and ERP System SAP.

Entry level engineer with a B.S in Chemical Engineering. Internship experience at a quality control lab overseas. Basic HYSYS experience, Strong communication skills and fluent spanish.

Power utilities equipment switching operation and maintenance.Fault finding ,rectification during breakdown of equipment.Computer literate.

B.E Mechanical Engineering and also completed NDT Level II as ASNT Standards

Ppetrochemical ngg, my completed pg dip in piping engg .

Seven (7) years of experience in the application and exercise of Welding Inspection and Non-Destructive Testing in engineering industries, refineries, power plants, fabrication yard and general oil and gas industries.

QUALIFICATION : DILOPMA IN MECHANICAL ENGG.,BASIC CORRSION PROTECTION

I have 7 years international field experience as a Drilling Engineer and Supervisor with Saudi Aramco and Suez Oil Company SUCO (joint venture RWE) in drilling and workovers of Oil and Gas wells.

MS Dos, Windows-98, 2000, XP.AutoDesk Inventor 11.0,Office-2007,XP,2003,

Maintenance and troubleshooting all instrument devices such as flow,Temp,level,Pressure measurement,analytical devices (Gascromatograph,O2,Moisture,Co2,So2,No2,PH,Conductivity analyzers)including DCS,PLC,ESD and Fire Gas system. Familiar with Windows-based PC,Software/Hardware,Network and Office

I'm recognized for my Confidence, Aggressive Nature,I had been involved in working on different kinds of projects like Batch process reactor, Building management system, Traffic management,

A Technical Sales & Services officer with a comprehensive experience in plant maintenance instruments sales and services matters mostly in Power plants, Fertilizer, Cement, Oil & Gas and Sugar Industry. Able to work individual and as a part of team.

BMSE with TX PE

Currently Principal Commissioning Engineer on Gas To Liquids project (Qatar), with 16 years experience in chemical and gas industries as operations technician, supervisor and lead commissioning engineer. Experience includes project work control and management.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 [ 68 ] 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out