CONTACT INFORMATION:
View contact information...
Education:
Ph.D. in Materials and Metallurgical Engineering – Middle East Technical University- Ankara, Turkey, January-1996
M.Sc. in Materials and Metallurgical Engineering – Middle East Technical University- Ankara, Turkey, March-1988
B.Sc. in Materials and Metallurgical Engineering – Middle East Technical University- Ankara, Turkey, July-1985
Professional Experience:
Associate Professor in Materials and Metallurgical Engineering Department at AL-BALQA APPLIED UNIVERSITY
September 2004-september 2005, Head of Materials and Metallurgical Engineering Department at AL-BALQA APPLIED UNIVERSITY
September 1997-May 2006, Assistant Professor at Materials and Metallurgical Engineering Department at AL-BALQA APPLIED UNIVERSITY
September 2002-July 2003 Head of Materials and Metallurgical Engineering Department at AL-BALQA APPLIED UNIVERSITY
October 1999-September 2000 Assistant Dean of the Faculty of Engineering at AL-BALQA APPLIED UNIVERSITY
October 1996-September 1997 Lecturer at Industrial and Chemical Engineering Departments, University of Jordan
Founder of Materials and Metallurgical Engineering Department at Al-Balqa Applied University
Scientific Committee member of The Third Jordanian Mechanical and Industrial Engineering Conference, 9-12/5/1999
Organizing Committee member of The Second Jordanian International Mining Engineering Conference 25-28/4/2000
Organizing Committee Chair of the First Jordanian International Conference in Materials Science and Engineering, Al-Balqa Applied University, 3-5/5/2005
Conferences:
AeroMat, Aerospace Materials Symposium, American Society for Metals, Long Beach, 11-14/6/2001, California
Second Jordanian International Mining Engineering Conference 25-28/4/2000
Third Jordanian Mechanical and Industrial Engineering Conference, 9-12/5/1999
Third Corrosion Symposium, The Corrosion Association, Middle East Technical University- Ankara, Turkey, 3-6/11/1992
Second Corrosion Symposium, The Corrosion Association, Middle East Technical University- Ankara, Turkey, 5-3/11/1990
First Corrosion Symposium, The Corrosion Association, Middle East Technical University- Ankara, Turkey, 1986
VIII Corrosion Symposium, The Corrosion Association, Osmangazi University, Eskisehir, Turkey, 9-12/10/2002
IX Corrosion Symposium, The Corrosion Association, Gazi University- Ankara, Turkey,
22-25/9/2004
The Sixth International Conference on Concrete Technology for Developing Countries, Amman-Jordan, 21-24/10/2002
X Corrosion Symposium, The Corrosion Association, Cukurova University- Adana, Turkey, 30/10-2/11-2006
Publications:
1 Sami Masadeh and Mustafa Doruk, " Hydrogen Cracking in Prestressed Concrete Structures and Effect of Chlorides",Journal of Corrosion, Vol.8, 1-3, 1996, The Corrosion Association, Ankara, Turkey
2 Sami Masadeh, "Corrosion of Steel Reinforcement Causing Concrete Cracking" Proceedings of The Sixth International Conference on Concrete Technology for Developing Countries
3 Sami Masadeh, Shadi Al-Khateeb, and Ahmad Al-Shkheibi, " Steel Reinforcement Behavior in Simulated Concrete Solutions Contaminated with Chlorides by Electrochemical Impedance Spectroscopy", Proceedings of the VIII Corrosion Symposium, The Corrosion Association, Osmangazi University, Eskisehir, Turkey
4 Sami Masadeh, " Effect of Cyclic Exposure on Epoxy Coating Performance in Dead Sea Water by Electrochemical Impedance Spectroscopy", Proceedings of the 9th International Corrosion Symposium, Ankara-Turkey, 22-25/9/2004
5 Sami Masadeh, " The Effect of Wire Connection on Cathodic Protection of Steel in Concrete", Indian Concrete Journal, Vol. 77, No.1, January, 2003
6 Sami Masadeh," Degradation of Epoxy Coating Exposed to Dead Sea Water", European Journal of Scientific Research, Vol. 5, No.4, 2005
7 Sami Masadeh," The Effect of Chloride Content and Humidity on Corrosion of Steel Reinforcement in Concrete", European Journal of Scientific Research, Vol. 6, No.3, june, 2005
8 Sami Masadeh," Potential Distribution Within a Cathodic Protected Steel Reinforced Concrete Structure", University of Sharjah Journal of Pure and Applied Sciences, Vol. 2, No.2, 2005
9 Sami Masadeh," Electrochemical Impedance Spectroscopy Of Epoxy-Coated Steel Exposed To Dead Sea Water", Journal of Minerals & Materials Characterization & Engineering, Michigan Tech.,Institute of Materials Processing, Vol. 4, No. 2, pp 75-84, 2005
10 Sami Masadeh, "Corrosion and Rehabilitation of Steel Reinforcement Exposed to Dead Sea Water", Proceedings of the X Corrosion Symposium,
The Corrosion Association, Cukurova University- Adana, Turkey, 30/10-2/11-2006
Proceedings:
Editor, Proceedings of The First Jordanian International Conference in Materials Science and Engineering, Al-Balqa Applied University, 3-5/5/2005
Student Supervision:
Bachelors:
1 The Effect of Passivation Inhibitors in Corrosion of Steel in Chloride Solutions
2 A Computer Program for Impressed Cathodic Protection Design
3 Corrosion and Rehabilitation of Reinforced Steel in Concrete Structures Exposed to Dead Sea Water
4 The Effect of Concrete Overlay Thickness on Metal Loss of Steel in Concrete Causing Cracking
5 Electrochemical Impedance Spectroscopy of Epoxy and polyurethane Coatings Exposed to Dead Sea Water
6 The use of Electrochemical Impedance Spectroscopy in Determining Pitting Corrosion of Stainless Steel
7 Electrochemical Impedance Spectroscopy of Organic and Inorganic Coated Steel Reinforcement in Concrete
8 Construction of a Potentiostat
9 Corrosion of Steel in Concrete in Dead Sea Water
Masters:
1 Polymer Coated Steel Performance Determination by Electrochemical Impedance Spectroscopy
2 Pitting Corrosion of Stainless Steel Exposed to Dead Sea Water
3 Copper based Iron-Copper Composites
Computer Skills:
Excellent knowledge in all windows versions
Excellent knowledge in all office versions
Excellent knowledge in internet and dealing with software
Awards
1 The best graduation project advising by Jordanians Engineers Association, 2002
2 The best graduation project advising by Jordanians Engineers Association, 2003
3 The best graduation project advising by Jordanians Engineers Association, 2005
Areas of Interest:
Corrosion, Corrosion Control, Electrochemistry, Cathodic Protection, Corrosion of Steel in Concrete, Cathodic Protection of Steel in Concrete, Hydrogen Embrittlement, Stress Corrosion Cracking, Electrochemical Impedance Spectroscopy, Coatings Evaluation, Failure Analysis, Shape memory alloys.
Memberships:
Jordanian Engineers Association
NACE International (National Association of Corrosion Engineers) USA
Courses Taught:
Materials Science I, II
Corrosion and Corrosion Control
Cathodic Protection Design
Metallurgical Thermodynamics
Solution Thermodynamics
Properties of Engineering Materials
Metallography
Ferrous Extractive Metallurgy
Non- Ferrous Extractive Metallurgy
Engineering Workshops
Phase Transformations
Engineering Drawing
Research Groups:
The Corrosion research group leader and founder
Languages
Arabic, English, Turkish
View contact information... |