Resume - Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Misco Jobs

Resume #58016

CONTACT INFORMATION:
View contact information...

Objective: Electrical/Instrumentation. Construction, Inspection, Supervision, Commissioning Position

Summary of Qualifications

Offering Extensive Experience in Industrial Electrical/Instrument Equipment
And Systems, Design Review, Construction Management, Installations, Commissioning, Shutdowns, Start-ups, Maintenance, Troubleshooting, Repairs, QA/QC Documentation, Personnel Supervision and Training.

ROLES & RESPONSIBILITIES

Monitoring Site Construction Activities in Accordance with the Project Specifications, Industry Standards and Guidelines. Attend Construction Progress and Safety Meetings. Auditing and Quality Control Functions for Engineering Design, Method Statements and Procedures for Inspection Test Plans. Oversee all Testing to Ensure Results are in Compliance and Acceptable to the Required Standards. Review all AS-Built Documentation Packages and Inspection Records. Actively Contribute to HSE Policy and Plans. Review and Ensure Job Safety Analysis Procedures. Attend Factory Acceptance Test for Equipment Compliance and Requirements. Ensure Site Acceptance Test of Equipment to Commissioned Level.

EMPLOYMENT HISTORY
ACCOMPLISHMENTS

MAY 2008 to AUGUST 2008: RUBICON VANTAGE. MAP TA PHUT, THAILAND
E&I Field Engineering and Supervision for outstanding works on the FPSO. Recableing of Main Shaft Generator to Engine Room Switchgear and Topside Control Room Upgrades.

OCTOBER 2007 to FEBURARY 2008: BECHTEL. SIRACHA, THAILAND
Performed Shutdown tie in's, Installation and Commissioning activities on new 11kv feeders, Transformers, 400volt Motor Control Centers. Performed uncoupled/coupled motor run in testing for new pumps and fin fans for the TPX Revamp Project at The Thai Oil Complex.

MARCH 2007 to SEPTEMBER 2007: TENGIZCHEVROIL.TENGIZ, KAZAKHSTAN
Ensuring the Commissioning activities on Power Management Controlling Equipment for Base control of the 110kv, 33kv and10kv Electrical Distribution System. The System was in control for Generator Load Sharing, Load Shedding of Large and non Critical Loads, Transformer Auto Tap Changers for Maintaining Bus Voltage and Generator Spinning Reserve.

AUGUST 2006 to FEBUARY 2007: CHEVRON/PHILLIPS. RAS LAFFAN, QATAR
Ensured Electrical QA/QC On Design, Construction, and Installation of Equipment at the Ras Laffan Olefin Project. Inspections on 33.kv, 6.6kv, 415kv Cables, Transformers, Switchgear and Motor Control Centers.

MARCH 2006 to MAY 2006: SHANGHAI LIANHENG ISOCYANATE. CAOJING, CHINA
Hazardous Area Detail Inspections on Electrical & Instrument Enclosures. Verifying that Equipment and Construction Methods Utilized met the Requirement of Chinese and International Standards. Checks of Classified Areas on Motors, Control Panels, Instrumentation Transmitters, Vendor Package Units, Heat Tracing, and Lighting. Training of Local Staff for Future Operating Equipment Safety Checks in Hazardous Areas.

DECEMBER 2003 to FEBRUARY 2005: BRITISH PETROLEUM. BAKU, AZERBAIJAN
E&I QA/QC Inspections on Design, Construction, and Installation of Equipment on the Baku/ Tiblisi/ Ceyan Pipeline Crude Oil Pumping and Pigging Stations. Diesel Generation, Substation, Switchgear, Motor Control Centers, PLC`S, UPS, Process Control Loop Diagrams, Fire & Gas, HVAC Equipment, MOV`S, Transmitters, Motors, Lighting and Small Power, CCTV, and Various other Systems to Completion Thru Commissioning Stage. Training and Evaluation of Local Staff on Operating and Maintenance Procedures of all Electrical and Instrument Equipment.

MAY 2003 to SEPTEMBER 2003: BANGKOK WEST WATER TREATMENT. BANG LENG, THAILAND
Supervision of Construction and Pre-Commissioning Activities Ensuring the Installation of an Outdoor 115kv Substation, Relay Control Panel, 22kv SF6 Ring Main Distribution System, Control Room DCS, PLC, Along with Energizing Transformers, 6.6kv, 380 Volt Motor Control Centers. Overseeing Testing of all Control Schematics and Loop Diagrams. Motor Run-in Tests. Training of Local Staff on Switchgear and Motor Control Centers. Trouble Shooting Techniques of Plant Equipment. Safety and Maintenance Evaluation of Personnel during Plant Operations.

APRIL 2002 to MARCH 2003: MOTOROLA THAILAND. BANGKOK, THAILAND
Electrical Inspection of Microwave Communication Containers for the TA Orange/ Motorola Mobile Phone Project in Thailand. Testing of Rectifiers, Fire Control Panels, A/C Controllers and Compressor Units. Along with 380 volt Distribution Equipment.

SEPTEMBER 2001 to FEBRUARY 2002: WASTE MANAGEMENT THAILAND. BOWIN, THAILAND
Consultancy Works on 22kv Pole Line and Transformers along with Commissioning Activities of the 380 Volt Substations, Motor Control Centers, Motors, and Emergency Diesel Generator at their Waste Environment Complex.

MAY 2001 to AUGUST 2001: TEXACO / MESSER AGS SYNGAS. JURONG ISLAND, SINGAPORE
Supervised Testing/Maintenance Activities on 33kv SF6 Switchgear, Transformers, 11kv and 400 volt Switchgear, Testing of Protection Relays, ESD Control Logic, Motor Control Centers. Planning and Setting up Temporary Power Supplies for Critical loads during a planned plant shutdown.

OCTOBER 2000 to APRIL 2001: ESSO THAILAND. SIRACHA, THAILAND
Quality Control Field Engineer on both Electrical and Instrumentation Equipment for the Addition of a 26mw Gas Turbine Generator Along with new Switchgear, Relay Protection Panel and Mark V Control System. Testing of all Control Interface Safety and Shutdown Loops. Enhancing the Stability and Efficiency to the Exxon Chemical Plant and the Esso Siracha Thailand Refinery. Training of Local Staff on New Generator Control System. Relay Function, Testing and Maintenance. Evaluation of Personnel during Construction and Startup.

JANUARY 1999 to AUGUST 2000: EXXON CHEMICALS. SIRACHA, THAILAND
Ensured Electrical Construction and Commissioning Activities for Exxon Chemicals on the Thai Aromatics Recovery Project at the Esso Siracha Thailand Refinery. A new Outdoor 115 kV Substation along with 11kv, 3.3kv, 380 Volt Switchgear and Motor Control Centers. Transformers, Cabling, Motor Run-in Test. Training and Evaluation of Personnel on Electrical Operation and Protection for new Outdoor High Voltage Equipment.

FEBRUARY 1998 to DECEMBER 1998: ESSO THAILAND, SIRACHA, THAILAND
E&I Field Engineer on the Low Sulfur Automotive Diesel Project which Consisted of Debottlenecking parts of the Refinery, Supervision and Testing over both 3.3kv and 380 Volt Motor Control Center Extensions with New Motors/Pumps Being Commissioned. Adding Electric Actuators to Crude Movement Valves and Tank Gauging Transmitters with cabling to the Main Control Room being Installed and Loop Tested.

JANUARY 1997 to DECEMBER 1997: NAKORN-THAI STRIP MILL. BOWIN, THAILAND
Ensured Electrical Equipment Design and Testing for Both Safety and Maintenance Purposes on 33kv, 6.6kv and 380 Volt Switchgear. Emergency Diesel Generators, Testing of High Voltage Cables, Protection Relaying, Also Electrical Design Works/ Installation of Equipment for Lightning, Surge Protection to Protect PABX, UPS and Administration Building Utilities.

JANUARY 1993 to NOVEMBER 1996: ESSO THAILAND. SIRACHA, THAILAND
Ensured Electrical Construction, Installation and Commissioning Activities on11kv, 3.3kv, and 380 Volt Transformers, Switchgear, Motor Control Centers, Two10mw Gas Turbine Generators, UPS Systems, Control Rooms, Loop Testing Remote Instrument Buildings, Substations, Motors, High Voltage Cabling, Motor Run-in Tests, HVAC Systems, Plant and Area Lighting for The Grassroots Siracha Refinery. Training of Local Staff on Operation and Maintenance of Electrical Equipment, Motors, Switchgear, Relay Protection and Transformers. Writing of Maintenance Procedures and Record Keeping.

FEBRUARY 1991 to DECEMBER 1992: MANNESMANNS. SAUDI ARABIA
Ensured Electrical Construction and Commissioning Activities for Mannesmanns Crude Oil Super Pump Pipeline Project. This added 13.8kv, 4160kv and 480 Volt Transformers, Substations, Switchgear, Motor Control Centers, Control Rooms, UPS, HVAC, and Control Buildings for the Gas Turbine Pumps in Eleven Pumping Stations across Saudi Arabia.

1985 To 1991: POWELL ELECTRICAL MANUFACTURING. HOUSTON, TEXAS USA
Provided Final Factory Assembled QA/QC Inspection of Industrial Electrical Substation Buildings, High Voltage Switchgear, and Motor Control Centers. Testing Activities Included Three Phase Primary Injection of Switchgear, Function Testing of Relay and Breaker Control Logic Circuits. Relay Secondary Injection Testing. Correctness of Dimensional and Mechanical Alignment of all Equipment. Checked Clearances, Sizing, Ductor, Hipot Testing of Bus Bars and Breakers Using ANSI, NEMA, NFPA,IEC and other Standards. Performed Factory Acceptance Tests for the Visiting Clients. Marked Up Final As Built Shop Drawings. Prepared Buildings, Switchgear and Equipment for Shipment to Project Sites World Wide.

1983 To 1985: NALCO CHEMICALS. FREEPORT, TEXAS USA
Provided Maintenance on Pneumatic and Electronic D/P Cell Transmitters, Process Controllers, Recorders Pneumatic, Actuators, Solenoid Valves, Capacitance Level Probes, Multi-Point Temperature Recorders, Transducers, ph Meters, Chlorinators, Pneumatic Controlled Fire Protection Systems, Pressure Switches and Gauges. As an Electrical / Instrument Mechanic for Nalco Chemicals to Ensure Minimum Downtime and Maximum Equipment Life.

1982 To 1983: ANHEUSER-BUSCH. HOUSTON, TEXAS USA
Provided Maintenance on Three-Phase Motors / Starters, Control Circuits, Photo Eye Relays, Timers, Counters, Quality Control Inspection Equipment, Level Sensors, Solenoid Valves, Control Panels, Limit Switches, Relays and Electrical Switchgear as a Maintenance Electrician for Anheuser- Busch.

1981 To 1982: TECHNICAL MAINTENANCE. HOUSTON, TEXAS USA
Ensured Electrical Maintenance on Explosion Proof Starters, High Voltage Switchgear, Control Circuits, Pressure Switches, Indicators Controllers, and Panel Alarms as an Electrical / Instrument Mechanic for Technical Maintenance in Support of Numerous Petrochemical Client Contracts.

1977 To 1981: INTERNATIONAL MINERALS AND CHEMICALS. MULBERRY, FLORIDA USA
Performed Electrical Maintenance on 5kv Synchronous Motor Starters, 480-volt Motor Control Centers, Control Circuits, Level Alarms, Zero Speed Switches, Control Panels, Conveyor Belt Systems, Very Large Electric Draglines and Plant Lighting as a Journeyman Electrician for International Minerals and Chemical.

EDUCATION / TRAINING

DESIGN COURSES FOR METAL CLAD SWITCHGEAR AND RELAY PROTECTION TECHNICAL TRAINING AT POWELL ELECTRIC. HOUSTON TEXAS. ONGOING PROGRAMS FOR NEW OEM EQUIPMENT.

COLLEGE OF THE MAINLAND. TEXAS CITY, TEXAS. TECHNICAL INSTRUMENTATION. ONE-YEAR PROGRAM. COMPLETED 1984.

TPC TRAINING SYSTEMS. BARTOW, FLORIDA. INDUSTRIAL ELECTRICAL APPRENTICESHIP. FOUR-YEAR PROGRAM. GRADUATED 1981.

POLK VOCATIONAL TECHNICAL CENTER. LAKELAND, FLORIDA. ELECTRICAL CONSTRUCTION, WIRING AND MAINTENANCE. TWO-YEAR PROGRAM. COMPLETED 1977.
________________________________________

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 6411)

Go to Search Parameters...

Brief Description

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Well-experienced instrument senior technician seeking a motivating position related to Construction, Commissioning and Maintenance applicable to industrial and OIL&GAS installations.

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

28 years experience in drilling fluids onshore and offshore across 4 continents. Fully experienced in both field engineering and office supervisory/management posts. IWCF Combined Surface/Subsea Supervisor well control certificate.

Working experience in Chemical plants with private sector and foreign organizations. Worked at ¡§Honeywell DCS TDC 3000¡¨ controlled Urea & Ammonia plants, FFC and ¡§Foxboro DCS¡¨ controlled Urea plant, Indonesia.

I know I would be the correct candidate because; I have never met a challenge that I could not solve, resolve, or find a solution to in an accurate and timely manner. I am a quality engineer with over 15 years experience in the automotive field alone.

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

Cogeneration, gas engines

• Results-driven, logical and methodical approach to achieving tasks and objectives

Free! I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor & Project Manager

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

Over 18 years of experience with reputed international companies with Sadaf , Ibn Zahr , Flour Daniel ,Deutsche Babcock, in important positions like Mechanical Engineer, Principal Engineer, Mechanical Superintendentposition in Engineering, Project and Construction Management.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

OBJECTIVE To secure a position with a corporation wherein I can apply the skills, knowledge and expertise obtained during my 18 years in the Health & Safety and Emergency Response fields.

I’m a civil engineer with studies in HSEQ, I have worked at Cusiana and Cupiagua Oil and Gas CPFs, I have been working for the past 6 years in HSEQ areas an I´m free to go wherever the job is. I speak Spanish as a mother tongue and have good English skills.

Application for the post of Control & Instrumentation Engineer. post graduate in Instrumentation engineering having more than 9 years of experience in automation Oil & Gas, Petrochemical and Fertilizers projects.

Senior Structural Designer in the Oil and Gas industry with experience of PDMS, Micro station and AutoCAD

• Drilling Engineer - Oil and Gas Drilling Wells Planning; • Rig operations experience; • GPS units, GIS’s methods and procedures; • Manage/coordinate teams of 15+; • Software programming knowledge and experience.

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and routed piping systems. Train others on PDMS software.

Process engineer, Sharif Institute of Technology, B.Sc. Degree, Tehran University, Equipment design, Takestan Industrial Systems Company, Well Engineer, Integrated Project Management, Schlumberger Company, Heriot Watt University, Student of Petroleum Engineering, Voluntary work in Indonesia and Iran

Looking for position of Lead Engineer of Rotating equipment in Design, Engineering and Construction organisations.

Total Eight and half years of Engineering, Commissioning and Maintenance experience of DCS/PLC in a petrochemical industry

Discipline leadership and management. Ten years experience in Oil, Gas, and Industrial Instrumentation and Control. Client based engineering experience. Major Projects include FEED, detailed design, construction, testing, commissioning of onshore and offshore facilities. Capital works projects.

look at next resume

Assembles and installing conduit wire, power cables. Install control and distribution apparatus. Read labels manuals and schematic diagrams. Install electrical motors (0.25-850 kW). Work with power tools and measuring instruments.

INTOOLS, Instrument Data Sheets,Sizing Calculations,Wiring,Hook-ups,Loop Drawings,I/O list,Bid Evaluation,Review of Vendor Documents/Drwgs,FAT Inspection,

Result driven professional with over 4 years of experience in Project Management, Programming, Instrumentation, Software Development and MES / PLC / SCADA Implementation.

Chemical Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out