Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #58094 next resume »»
CONTACT INFORMATION:
View contact information...

JOB TITLE
Senior Reservoir Engineer

PERSONAL PROFILE

I have worked as a reservoir engineer for 9 years in different OPCOs for Wintershall AG. Working as a team member with other engineers, geologists and technicians to aggressively develop properties impressed me and accelerated my experience. I have attended many courses and been assigned to different locations in order to apply reservoir engineering, conducting reservoir studies including well log interpretation, decline curve analysis, pressure transient analysis, and reservoir simulation to optimize development (well spacing, completion techniques, infill drilling and horizontal targets) of key assets.
Personally, I am an energetic, highly motivated self starter. I perform effectively even within a highly pressurised working environment. I am proactive individual with a logical approach to challenges and am looking forward to continuing developing my career in the field of Petroleum & Reservoir Engineering.

KEY SKILLS

„X Developed understanding of G&G, petrophysics, well operations, production engineering, E&P economics.
„X Well Reservoir Engineering (well testing, production logging, vertical flow modeling, stimulation, etc¡K)
„X Rock and fluid properties characterization (RCA, SCAL, PVT), analysing and modeling measured data and preparing simulation input data.
„X Reservoir Management (production and recovery optimization, field development, etc.)
„X Field Reservoir Engineering (reservoir simulation, network modeling, material balance analysis, well test interpretation).

EDUCATION

„X Bachelor Degree obtained in Petroleum Engineering, Al-Fatah Univ., Tripoli ¡V Libya, 1994.

Enhanced Oil Recovery of WAHA-X oil field.

CAREER HISTORY
„X 01/2004 ¡V DATE Wintershall-Libya (S. Reservoir Engineer), Libya
„X 07/2003 ¡V 01/2004 Wintershall- Barnstorf (Reservoir Engineer), Germany
„X 01/2003 ¡V 06/2003 Wintershall-NZ (Reservoir Engineer), Netherlands
„X 01/2002 ¡V 12/2003 Wintershall-AG (Reservoir Engineer), Germany
„X 08/1997 ¡V 12/2001 Wintershall-Libya (Reservoir Engineer), Libya

WORK EXPERIENCE

Jan-04 to present Senior Reservoir Engineer
Libya N-field development project coordinator and focal point of N,P,T fields (E&P oil asset).

* Well Reservoir Engineering
1.Monitor drilling programs with respect to testing and completion and review proposed program/amendments.
2.Planning of surveillance programs, witness testing operations and open/cased-hole logging (RFT/MDT, PLT, TDT, etc¡K) on site and liaising with geologists, geophysicist and petrophysicist engineers and commercial managers in interpreting well-logging results to use for reservoir monitoring.
3.Design, analyze and interpret regular gradient, build-up, drawdown, multi-rate, interference tests, long term tests, fall-off test, DST, etc., using type curve methods and PANSYS software.
4.Investigate formation damage identification, mitigation and remediation.

* Reservoir Rock and Fluid Characterization
1.Plan and monitor progress of Conventional & Special Core Analysis, PVT sampling and measurements, evaluate and model the results, and implement them in the simulation using PVTi.
2.Used different approach (Hydraulic Flow Units) to select samples for SCAL measurements, the results used as an input to the numerical simulator to represent the reservoir characteristics.

* Reservoir Management
1.Illustrate suggestions and ways to improve the previous work done and comment upon reservoir studies, undertaking computer modeling for optimized development plans
2.Contribute in preparation of life of field sheet (LOF), operational planning, ICR, and annual reservoir status report to company headquarters.
3.Negotiate with and report to shareholders (NOC) to settle operations and plans.
4.Preparation of applications and acquisition of appropriate governmental approvals and maintain regulatory requirements for the various approved projects
5.Prepare technical documentation for last activities done and give presentations supporting company for NOC technical meetings.
6.Assist in preparing detailed integrated concession/field development plans.

* Field Reservoir Engineering
1.Worked on feasibility of water injection in N-field and Con.97 in general, commence related measurements & studies (eg. Rock mechanic, compatibility of water, etc..), design and supervise injectivity test programs for candidate wells.
2.Start a project to update N-field simulation model to look for any pressure maintenance means (EOR/IOR) in the field using ECLIPSE. For gas injection, the black oil model was converted to a compositional model and used for economics evaluations.
3.Used Material Balance spread sheet and Prosper/Mbal/Gap as a quick reference tools to generate the production profile and to assess un-simulated reservoirs (P,T fields).

Jan-02 to Jan-04 Reservoir Engineer
* Conducted reservoir simulation study for NorthSea off-shore gas reservoir (P14-a), to estimate GIIP, the aquifer strength from the available production data, provide production forecast for gas and liquid with respect to the increase in water production and to investigate the water zone. The effect of vertical communication (continuity of shale layers) and benefits of infill drilling was also tested in a simulator. Witnessed off-shore operations/tests and analyzed data of DSTs, 3-rate tests and regular pressure gradient surveys using PANSYS.
* Contribute in Nakhla reservoir characterization using a static-dynamic approach. The reservoir modeling of the flow units, in which geoscience, production logging and well testing have been integrated to reduce the uncertainty in each discipline. A diagnostic plot was developed for Nakhla wells to clarify the permeability contrast between transmissive and strorative units. The work led to an easier history match of the field's reservoir performance, permeability predictor for Nakhla wells was derived (already applied successfully on some wells).
* Examined several small oil pools in Siberia and Caspian Sea for Wintershall AG. for prospects of low risk oil development. Worked on open/cased hole logs evaluations, reserves estimation using conventional techniques (volumetric method, type curve and material balance) and production forecasting.
* Conducting a single-well and sector models from full field simulation models for fit-for-purpose investigations of a large tight gas condensate reservoir (Urengoy), and gas cond. with oil rim reservoir (Sukhovskaia).

Aug-97 to Dec-2001 Reservoir Engineer
* Engaged in reservoir simulation study of a carbonate oil reservoir (Hamid), including most phases of numerical simulation: data analysis and acquisition (open/cased hole logs, pressure transient, PVT, SCAL), model construction, up-scaling, history matching, using Eclipse100 black-oil simulator in order to estimate reserves, ultimate recoveries, water conning and prediction performance of the reservoir.
* Start using simulation modeling by updating Tuama reservoir model, history matching, performance prediction and sensitivities runs.
* Analyze and interpret regular static/flowing gradient survey, PI and 3-rate tests using PANSYS on fields Jakhira, As Sarah, Hamid, Tuama and Nakhla for H/V wells and hydraulic fraced wells.
* Witnessed testing operations and cased-hole logging on site.
* Used material balance and decline curve analysis for OIIP calculations and production performance forecast of Hamid and Tuama fields.
* Junior engineer rotations (headquarter and field).

KEY I.T. SKILLS

* Good experience in Windows operating system, Microsoft Office applications, CorelDRAW, Adope PhotoShop, etc...
* Good experience in PanSys, Petroleum Expert (Prosper, Mbal, Gap), Emeraude (PL Interpretation), Geoquest package (Eclipse 100, Office, Grid, FloGrid, Flovis, etc¡K)
* User of Petrel, Eclipse 300, PipeSim, SPSS, etc¡K

SELECTED COURSES

* Carbonate and Fracture Petrophysics, Nov 2006 HOT eng, Dubai-UAE
* Formation damage, Jul 2006 OGCI, London-UK
* Eclipse 300 compositional modeling, Sep 2005 Schlumberger, London-UK
* Fundamentals of O&G Economic Evaluation, Jul 2005 NExt, Cairo-Egypt
* Advanced PVT & EOS Fluid Charac., Dec. 2003 HOT, Vienna-Austria
* Open Hole Logging, Feb. 2003 OGCI, Barnstorf-Germany
* Using Special Core Analysis in Res. Eng., Nov. 2002 Imperial College, London-UK
* PETREL, 3D Geological Res. Modeling, Sep 2002 Clausthal Uni., Germany
* Advanced Welltest Analysis, Aug. 2002 EPS, Edinburgh-Scotland
* Drilling and Completion Eng. for non-DEs, May. 2002 NExt-PTC, Pau-France
* Naturally Fractured Reservoirs, Sep. 2000 Pet.Eng. Alberta, Kassel-Germany
* Pipesim and Pipesim-Net, Jul. 2000 Baker Jardine, Tripoli-Libya
* Eclipse 100 User Course, Nov. 1999 Schlumberger, Tripoli-Libya
* Production Logging, Oct. 1998 EPS, HWU, Edinburgh-Scotland

ADDITIONAL INFORMATION

* (Offshore Safety Certificate ¡V MTC, North Sea, Netherlands) First Aid & Hypothermia, Helicopter Safety & HUET, Survival theory & practice, Firefighting. (valid until end 2006)
* (Onshore Safety & Emergency Course), in-house
* Drive License: Full and Clean.

AFFILIATIONS

* Society of Petroleum Engineer, SPE
* Petroleum Engineering Faculty, Elfatah Uni., Tripoli

LANGUAGES

* Arabic: Mother tongue
* English: Good
* German: Basics

INTERESTS

* Computer applications & surfing internet, walking, team play, socialising, entertaining and eating out.

References: Provided upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1601 to 1650 of 6411)Go to Search Parameters...
Brief Description
Senior engineer (piping construction & mechanical installation engineer
•Installation, loop checking, Commissioning and maintenance of online Analyzers
Mechanical engineering (heat and fluids)
Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.
I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.
I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.
With fourteen(14) years experience in Piping Design and Field Engineering Works of various Petrochemical, Oil Gas Plant from feed engineering up to detail design. Capable of checking of piping design up to IFC drawing and with experience of site engineering works.
electrical technician to repair n maintain all HV/LV electrical machines n equipment,testing them, trouble shooting and corrective maintemance.3 yrs diploma cource completed in electrical engineering.11 yrs experience in electrical jobs.result oriented n confidence in work.
Excellent organization skills
Over 8 years experienced on diffrent type of rig work over,deep and ultra deep rigs which done explratery wells. i passed the Diploma of Associate engineering in Mechanical. I done Engine overhaulling CAT D398 & Draw Works overhaulling.
1990 Diploma in Mechanical Engineering
I am Bachelor of Science in Computer Science and Engineering.working as a SCADA Engineer in PGCB about 5 years.
Process operator of Fluid catalytic cracking unit and Hydergen gereration unit
Subsea Installation Supervisor of wellheads, XT,s and completions.
Total experians 8 years instrumentation and control technician
A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).
PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.
Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).
Experienced Supervisor in the Electric Submersible Pump Industry
*Offshore pipeline installation engineer, Project engineer in major pipeline projects
Reservoir Engineer
Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.
Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.
Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.
Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.
Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design
Free! Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.
Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument
15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa
ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point
Senior Chemical Integrity Engineer
Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation
Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance
I have 12 years experience in Automation(DCS & PLC). I also worked as project management.
I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc
For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.
Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.
Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.
I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.
I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....
A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors
INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks
Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.
SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.
BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)
Junior well engineer, Design engineer
Qualification: MSc Corrosion Control Engineering Experience
Instrument Engineer
Bachelor's in Commerce plus Mechanical Diploma
Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   [ 33 ]   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com