Resume - • Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

Misco Jobs

Resume #58560

CONTACT INFORMATION:
View contact information...

Objective

To pursue a challenging career in Instrumentation field through the renewed organization where my skills will be utilized.
Summary

* Bachelor of engineering in Electronics and Instrumentation.
* Nearly 8Years experienced in Instrumentation Engineering Field.
* Training courses in PLC, DCS RS3 programming and configuration
* Exposure with HIMA plc, TRICONIX plc, SEMINS plc
* Alan Bradley Control Logix 5000, RS link, Controlnet & Data Highway
* Metering analyzers gas analyzer, h/c analyzer, water dew point analyzer, flow computer, ultrasonic meter for gas production. PD meter for condensate metering station

Career Summary
* 1 year working experience in electrical and instrumentation maintenance in me-tallic factory (industry of gas cylinders ) 1999
* 7 years of working experience in automatic control, maintenance of all meas-urements &instrumentation devices, transmitters, troubleshooting in the oil, gas field in Badr Eldeen petroleum company (BAPETCO– Shell Egypt) in the fields of

* commissioning, configuration, calibration, troubleshooting, modification and
Maintenance

EXPERIENCE
Present: Badr Petroleum Company (BAPETCO) Shell Egypt.)
Obaiyed is one of BAPETCO fields (Two gas trains with capacity 400mmscf/d And60,000barrel/d condensate controlled by RS3 fisher Rosemount DCS& Imtech me-tering for gas and condensate, I started work in Obaiyed as instrument Engineer. My main task was installation, commissioning, startup, trouble-shooting, repair, executing plant changes, and preventive maintenance routine, supervision of all instrument ac-tivities.

Job Profile: Instrument/Control Engineer (senior Engineer)
* Attend the commissioning, startup of the plant and apply the loop test for most of
The plant control system.

* Performing the troubleshooting, loading, restoring, start¬up and modifying the
Applications of the programmable logic controller PLC's for different manufactures.

* Responsible for Maintenance & troubleshooting of ESD and fire & gas systems
* F&G PLC (Triconix) programming and maintenance
* ESD PLC (Triconix) programming and maintenance
* F&G detectors (infrared open path gas detectors, single point gas detectors, infra-red flame detectors and heat detectors maintenance and calibration.

* DCS Fisher-Rosemount RS3 specialist in configuring analogue/discrete control
Loops, any needed logic or control application, maintenance and troubleshooting.

* Supervises and carry out all preventive, corrective maintenance activities in
Accordance with Company Safety regulations, and ensure the work
Objective and programs are implemented

* Maintenance & troubleshooting of Fisher Rosemount & Foxboro instrumentation
Pressure, flow, level, temperature, analytical transmitter's types
Control valves smart positioners.
Wellhead hydraulic baker control panel (CAC panel)
Maintenance of fan pitch control and louvers for gas coolers

* Using SAP planning software for maintenance schedule and planned S/D

* Carry out the modification of the maintenance routines according to the normal
Operation of the plant

* Ability to mange resources manpower, spars parts, test equipment, for optimizing
The Maintenance efforts, the cost and planning procurements.

* Carry out and supervision all maintenance tasks which lead to improve reliability
Availability and technical integrity of the plant

* Preparing the required engineering studies according to the national standards

* Plc maintenance and troubleshooting
* Hima PLC for fired heaters also ultraviolet detectors, pilots, oxygen analyzer and
Flame ionization.
* Siemens PLC for reverse osmosis (R.O.) water treatment skid.
* Bentley Nevada dual temperature and vibration monitoring troubleshooting.
* Modicon PLC for turbo expander skid.
* Allen Bradley PLC for export gas compressors

* RTU (ROC364 unit fisher) configuration to transfer data from or to gas wells.

* Honeywell anti surge controller configuration

* Gas and condensate metering stations, troubleshooting, calibration and validation
Supervisory computer and flow computer Setup, configuration and maintenance
Instromet Ultrasonic meter (Q5)
Analyzers (gas chromatograph. relative density, water dew point, H/C dew pint).
Smith PD meter and Prover loop for proving

* Good knowledge for preparation the instruments VTA's required for field
Maintenance
* Hazop and Hazed studies

Major instruments on site

* Distributed control system DCS (RS3) Fisher-Rosemount
* Thomason- General Electric Mark V, gas turbines with speedtronic control system
* Triconix / Hima / Modicon / Siemens / Allan Bradley / speedtronic PLC's.
* CAC oil & gas wellheads hydraulic control panels with Fisher ROC364 unit. With
(HIPPS) high integrity pipeline protection system and venture meters
* Leaden line break valves.
* KTI Hot oil heaters with Honeywell ultraviolet controllers and detectors
* Demag Delaval gas compressors control system
* Mafi Trench gas turbo expanders with Bentley Nevada vibration temperature
&speed monitoring
* Gas & condensate fiscal Metering stations include
Instromet ultrasonic gas flow meters & Smith PD meter for condensate
Solartron flow computers, Ametec water dew point, Bovar H/C dew point analyzer
&Fisher Rosemount gas Chromatographs analyzers.
* Field instrumentation of different manufacture "Foxboro, Fisher Rosemount,
Masonelian, Magnetrol "
* Control valves "smart positioners fisher Rosemount, Masonelian, Mokveld, and
Motorized Rotork motor valves.
* Fiber optic technology
* Flare gas metering Roxar, Vortex flow meters, PD meters
* Radar tank gauging system, Magnetrol level transmitters (fisher-Rosemount)
* Delaval Stork compressor Anti surge controller (CCC) for Recycle and Export
Compressor).

COURSES AND TRANING:
* Training abroad in Holland in the metering station(shell university)
* English courses
* Obaiyed Basic System.
* Windows, Microsoft office
* Obaiyed Plant Operation and Maintenance.
* Introduction to MAFI TRENCH Turbo expanders.
* Basic Gas Turbine training.
* Basic of instrument ion and control.

* DCS distributed control sys configuration and troubleshooting for RS3 DCS
* Allen bradely PLC 500, Hima PLC for Heater package
* Thomason /GE. Gas turbines major components, operation and Maintenance.
* Valves Selection, Installation and Maintenance.
* Maintenance of Benfield Process.
* Operation of axial and centrifugal compressor control systems, Mainte-nance, programming of anti-surge controller (HONEYWELL...)
* Custody transfer, sales &Fiscal Metering System. Open Shell university in Holland
* Advanced control loop Process modeling and control loop tuning
Using pre-tuner Soft ware.

Educational Background

Degree B.Sc. of Electronic engineering, Telecom department 1996
University College faculty of electronic engineering Menofia University
Rate of Appreciation good 72%
Graduation project grade distinction

SUMMARY OF QUALIFICATIONS:
------------
* Bachelor of engineering in Electronics and Instrumentation.
* Nearly 8Years experienced in Instrumentation Engineering Field.
* Training courses in PLC, DCS RS3 programming and configuration
* Exposure with HIMA plc, TRICONIX plc, SEMINS plc
* Alan Bradley Control Logix 5000, RS link, Controlnet & Data Highway
* Metering analyzers gas analyzer, h/c analyzer, water dew point analyzer, flow computer, ultrasonic meter for gas production. PD meter for condensate metering station

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 6543)

Go to Search Parameters...

Brief Description

Corrosion Engineer with 5 years of experiance in DownStream Oil and Gas

Over 8 (Eight) years of experience in Construction Welding Inspection, painting Inspection,NDT, QualityControl/Qality Assurance, surveillance, execution, co-ordination,hydro testing and destructive testing in the field of refineries,petro chemicals, fabrication yards and offshore platforms.

6 years exp in piping design engg field

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

Analysis Estimation-Officer 10 years as operations engineer in power plant

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

PDS, CADWorx, Rebis AutoPlant

HSE Officer

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

I hold a Bachelors Degreein Petroleum Engineering. I also have a 2 year hands on Rig experience with Transocean and 4 year LWD Engineering with Major companies.

I graduated from the University of Oklahoma, USA (Msc Petroleum Engineering), I have been working for the Algerian oil company SONATRACH as a Reservoir Engineer since Feb 2005. I can assure you that I am reliable and hardworking, ambitious and highly motivated individual

15 years in the Canadian Oil and Gas Industry, I have a well rounded understanding and knowledge of the industry. I have worked as a mud engineer providing technical service to the Western Canadian Foot Hills region. Have a great understanding of oil base fluids, water based and advanced Gel/Chem

Junior Well SIte Geologist, Junior Pore Pressure Engineer

6 years experience in Drilling Rigs,shipping &Oil & Gas field as a Piping Designer.

chemical engineer with 6 years experience on oil and gas production platform in Persian Gulf, commissioning and start up alongside with SHELL company

Automation engineer

Experienced, skilled, self-motivated, petroleum geologist with strong 2-D/3-D seismic interpretation and prospect generation background in South Louisiana and South Texas. Team player with strong workstation skills and ability to provide quality interpretations. Seeks a position to work on diverse

Petroleum Engineer with almost 6 years Experience

Senior Chemical Engineer - professional with more than 20 years work experience in Oil refineries-execution, running and shutdowns, Industrial projects, Construction, Manufacturing, Water treatment plants, Projects management, QC/QA Management, Internal auditing and latterly specialist Educator

Simulation Engineer

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Project Engineer / Manager

Petroleum Engineer with experience in Chemical Treatment.

I graduated from Technology Industry School in 1988. I worked for PT Arun LNG.Co. for 11 year since Nov.1989 to March 2001. I have been working for Qatar Petroleum as Senior Laboratory Techinician since March 2001 to present.

vender inspection, Inspection of internal & external coating for steel pipes, pipe fabrication (LSAW&HSAW), NDT methods witness(RT,UT,MPT & LPT).

A good worker, I do my best.

I would like to inform you that I (RAVI KUMAR PALLELA, S/o RUDRAYYA) completed my degree in B.E (Production) discipline with 70.3% in First Class with Distinction from Swami Ramanand Theerth Marathwada University, Nanded in the year 1999. I Have More than 6 ½ Years experience in CAD/CAM area.

Highly qualified in 3D modeling and design as well as control and instrumentation

Worked as marine engineer, certification from Uk, maintenance and operation of machinery

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Senior process engineer O&G; 19yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Area of expertise is ranging from Preliminary and Details Design, Construction

Design Engineer (Piping & Stress Analysis), Mechanical Engineering

9 years in Pipeline Engineering, Project Management/Engineering Co-ordination for Conceptual, Bid & detailed design / engineering, & construction, Analysis and Design of RCC & STEEL Structures.

• Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out