Resume - Drilling Engineer / Foreman (onshore)with 14 years field supervisory experience ...

Misco Jobs

Resume #5925

CONTACT INFORMATION:
View contact information...

EDUCATION
Texas A&M University - College Station, Texas
Bachelor of Science - Mechanical Engineering - December 1984

WORK EXPERIENCE

Sr. Drilling / Completion Engineer (Cimarex Energy Co. – Gulf Coast / South East Region)

* Preparation of Gulf Coast (TX) exploratory drilling / initial completion plans (~15,000' Deviated HTHP well design).
* Monitor drilling / completion operations performance; provide on-site engineering assistance.
* Post-well analysis; continuous improvement opportunities; best practices documentation.
* AFE preparation and project cost analysis.

Sr. Staff Drilling Representative (Conoco / ConocoPhillips – Lobo / San Juan Asset Unit)

* Provide functional guidance / mentoring to drilling foreman staff.
* Develop and compile the Lobo Drilling Standards Manual.
* Audit drilling operations for safety and operational compliance.
* Troubleshoot on-site drilling problems; provide safety and technical support.
* Active drilling program – average of 120+ well spuds per year, 1998 – 2003.
* Liaison with contractors in planning, problem resolution, continuous improvement.
* Review and approve drilling expenditures; assist with bid / contract negotiation.
* Maintain drilling foreman work rotation schedules.
* Perform post-well analysis; identify failure mechanism to prevent recurrence.
* Perform critical / specialized engineering assignments:
-Casing Drilling Program; feasibility and pilot program well planning.
-Directed on-site drilling operations for Casing Drilling pilot program (5 well package).
-Under Balanced Casing Drilling Program; feasibility and pilot program planning.

Drilling Superintendent (Sonat Exploration)

* Supervised a staff of 7 drilling / completion foremen.
* Prepared and negotiated drilling contracts.
* Reviewed/Approved drilling and completion programs.
* Developed drilling foreman training/orientation manual.

Rig Supervisor (Enserch, Sonat, Conoco)

* Supervised development and exploratory on-shore drilling operations in Texas, Oklahoma, Louisiana, Mississippi, Wyoming and North Dakota.
* Experienced in planning/directing/executing well control operations.
* Experienced in applications of water base and oil base drilling fluids.
* Experienced in application of directional drilling methods.
* Experienced in rig-site computer database operation and management.

Drilling Engineer (Enserch, Sonat)

* Designed development well plans for on-shore Texas and Oklahoma. This included AFE preparation, well planning, rig selection and on-site technical assistance as required.

Production Engineer (Enserch)

* Design artificial lift equipment requirements.
* Develop well completion and workover procedures.
* Perform dynamometer analysis on rod pumped wells.
* Monitoring and database management of daily production levels.

POSITIONS HELD

5/03 – Current
Sr. Drilling / Completion Engineer, Cimarex Energy Company – Tulsa, OK. (Gulf Coast / South East Region)

10/02 – 5/03
Lead Drilling Representative SGL 16, ConocoPhillips, S. Texas BU / Lobo (Title change resulting from company merger; role/responsibility unchanged)

5/02 – 10/02
Sr. Staff Drilling Representative, Conoco, Lobo / San Juan Asset Unit.
(Performing duties as Lead Drilling Representative ~ Field Supt.)

5/99 – 5/02
Staff Drilling Representative, Conoco, Lobo / San Juan Asset Unit.
(Performing duties as Lead Drilling Representative ~ Field Supt.)

1/98 – 5/99
Sr. Drilling Representative, Conoco, Lobo Asset Unit.
(Performing duties as Lead Drilling Representative ~ Field Supt.)

12/97 – 1/98
Drilling Superintendent, Sonat Exploration, E. TX / N. LA BU.

7/97 – 12/97
Sr. Drilling & Production Engineer, Sonat Exploration, E. TX / N. LA BU.

10/96 – 7/97
Drilling Supervisor, Sonat Exploration, Gulf Coast Region

12/90 - 10/96
Drilling Representative 4, Conoco, Corpus Christi Division

10/90 - 11/90
Engineer 4-PER Drilling Services, Conoco, Houston Division

5/90 - 10/90
Production Engineer I, Enserch Exploration, Midland

1/89 - 5/90
Drilling Engineer I, Enserch Exploration, Dallas

10/87 - 12/88
Drilling Supervisor I-Western U.S., Enserch Exploration, Dallas

6/87 - 10/87
Senior Clerk III, Enserch Exploration, Dallas (*)

1/87 - 6/87
Jr. Engineer-Ordnance, American International Mfg. Co., Ft. Worth (*)

1/85 - 10/86
Drilling Supervisor I-Eastern U.S., Enserch Exploration, Dallas

* Denotes position resulting from industry downsizing event

LEADERSHIP & TECHNICAL SKILLS

* Technical Expertise-Strong/Competent technical drilling skills. Decisions formulated based on utilizing engineering / analytical skills, operational experience and all available resources. Able to respond to rapid or unexpected changes in operations with satisfactory results. Strong and balanced commitment to conduct operations for achieving both safety and operational goals. Promote and champion the concept of "Continuous Improvement".

* Planning and Organizing-Establish goals and expectations, allocates time, anticipates problems and develops contingency solutions. Provide sufficient instruction / detail / information so that assigned tasks can be completed by others without difficulty.

* Communication-Able to present information (written/verbal) in a clear and concise manner, organized so that ideas, instructions or expectations are clearly understood. Excellent listening skills, able to capture information or instruction when presented.

* Safety Leadership – Committed to the belief that all accidents are preventable, promote safety through the use of Job Safety Analysis, utilize/teach behavior based safety programs such as STOP, investigation of all incidents to arrive at root cause for prevention of recurrence, auditing for compliance/understanding of policy such as confined space entry, hot work, lockout-tagout; lead by example in all matters pertaining to the personal safety of every employee.

* Organize and coordinate work assignments between a cross-functional and diverse group of people, including both company and contractor employees.

* Evaluate and implement alternative work plans as conditions dictate.

* Knowledgeable with competitive bidding and contract negotiation processes.

* Supervised operations having budget ranges of $200M - $3MM.

* Develop and implement work schedules and forecast timing for services, materials and personnel.

* Liaison with regulatory agencies to maintain and ensure compliance.

PROFESSIONAL AFFILIATION

Registered Professional Engineer, State of Texas
Certificate Number 68152 issued July 1990

Member, Society of Petroleum Engineers

INDUSTRY TRAINING

Sub-Sea Well Control (Drilling/Workover/Completion)
Developing Supervisors Training
Conoco Applied Drilling Practices
Negotiating To Yes
Conoco Drilling Fluids-Solids Management Course First Aid/CPR
Baroid Drilling Engineering I
Defensive Driving
Stuck Pipe Prevention Course
Conoco/DuPont Safety Leadership
Hazardous Materials Technician
Conoco Media Training
Spill Prevention Control and Countermeasure
Covey, Principle-Centered Leadership
Confined Space Entry/Lockout-Tagout/Hot Work
STOP Training For Supervisors

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 6411)

Go to Search Parameters...

Brief Description

Presently I am working with ABB Lummus, Singapore in the post of Senior Structural Engineer.

GNPOC(Grater Nile Petroleum Operating Co.Ltd.Sudan.Through Ipedex. Senior Production Operator in CPF. Since Dec 2nd 2004

Drilling Engineer / Foreman (onshore)with 14 years field supervisory experience and 5 years engineering/planning experience.

1. 16 years of experience & 14 years as Licensed Engineer. 2. Problems Solver with high standards of quality. 3.

Drilling supervisor with 19 yrs of experience on land rigs exploratory, development, workover , horizontal, multilateral wells available . Excellent communication skills, result oriented, get after it attitude, hard working , safe approach, overseas experienced. IWCF valid. References on request.

i can all design for instrument Offshore & Onshore

Electrical Engineer, QA/QC Engineer, Pre-commissioning Engineer

Foreman/Mechanic in the feild of Diesel generator,I T I Fitter, 25 Year Experience

I am familiar with EPC design practices and adaptable to the development and change management of works in progress, right from feed stage through detailed engineering till upgrading and expansion / revamp, within the specified limits of scope of work and beyond my defined role of functions, from co

Piping Engineer with 14 years of expereince

BTech Electrical , 11 years exp in Refinery, Petrochemicals, Oil & Gas Plants

Middle to senior level assignments in plant maintenance, machine utilization & Control with an organization of repute.

I am chemist in oil industry

Drilling Engineering Advisor with over 20 years experience at various positions in drilling, including over 15 years international experience. Have experience as mud engineer, drilling fluids supv, drilling engineer, rigsite drlg supervisor, drlg superintendent and drlg project manager.

i have diploma engr in mech engg. having 18 years expr. of maintanance of processand power plant equipment

I am B.E. (Electronics & Communication) with 10 yrs. exp. as a QA/QC Engg in Oil & Gas Plants, Power Plants, Fertilizer Plants, Sea Water Plants in OMAN, K.S.A, UAE,QATAR with ARAMCO, PDO, DEWA, QAFCO and i am aprroved QC Engg & Inspector in instrumentation and Telecommunication

I am looking for a job in the marine sector. I have worked on board Tankers, OBOs, Bulkers and Container ships. I am an ex cadet of Bangladesh Marine Academy, Ctg. I did an Advanced Diploma in Marine Engineering from Singapore Polytechnic. I also hold a Singaporean Class 1 COC.

Dedicated professional with 18+ years of experience in • Installation & service of Electrical submersible Pumps at onshore and offshore drilling rigs

11 years on instrumentation chemical and petrochemical plant, maily handle EMERSON DeltaV/Honeywell TDC3000/FF instrument

Sincere and hardworking with good communication and interpersonal skill looking for some challenging assignment

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

Design Engineer, Project Engineer, AutoCAD designer

Maintenance Engineer (rolling mills)

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

I have attained 17 plus years of field technical service in the Oil Refining, Petrochemical, & Refrigerations fields. I wish to utilize this experience, for advancement of my career, with a successful minded firm.

Estimation Engineer - Instrumentation.

Chemical Engineer with 11 years of experience in Project Engineering & Management in Chemical, Petrochemical, Refinery & Oil & Gas sectors.

Performing work as per international standards following operational excellence management system

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

•Experienced in sizing of process equipments •Experienced in using process simulation HYSYS, Pipeflo and Flarenet softwares• Expert in preparing process documents/drawings i.e.PFD’s and Data sheets•Familiar with ASME/ANSI codes, ASTM and API standards

I am diploma engr in mech. engg. having 18 years expr. in maint. of process plnat equipment

Experienced Chemical/Process Engineer (over 9 yrs experience). Petroleum refining, Liquefied natural gas (LNG) production and gas processing, process design, Offshore oil and gas platform deisgn (topsides), process simulations (Hysys), conceptual process design, detailed process design, Training.

Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Proficient in Accident/Incident Reporting and Investigation, HAZOP, HAZID, Risk Assessment (JSA), Implemented and periodical measurement of HSEMS Program; Provided assistance and advise to plant management, supervision and employees on HSE matters; WHMIS, Hazardous Waste Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out