Resume - my expertise are using any release of autocad, rhinoceros for 3d and GHS for sta...

Misco Jobs

Resume #59296

CONTACT INFORMATION:
View contact information...

WORKING EXPERIECED

TECHNICAL STAFF / AutoCAD DRAFTSMAN
TIMES MARINE SURVEY L.L.C.
P.O. BOX 7280, Sharjah, United Arab Emirates
02 March 2006 up to present

Sphere of Duty:
* Prepare Structural, Electrical, Mechanical presentation, conceptual, class and production drawings.
* Calculate Trim and Stability of boat using Rhinoceros and General Hydrostatic (GHS) Program.
* Ensure the drawings are prepared according to the Client, Class, Regulatory requirements and internationally accepted marine standards.
* Recommends to the Section Head any required additional information or date that are to be acquired from the client.
* Assist Section Head in rectification of non-conforming drawings and calculations.
* Assist the Section Head in administering the company rules and regulations.
* Conduct onboard survey, inspection of vessels, structures preparatory to development of production and fabrication drawings.
* Prepare ship's lines drawing and offset table.
* Provide 3D Model for vessel presentation using "Rhinoceros" software.
* Assist the Section Head in the Supervision of Trainee Technical Staff.
* Conducts preliminary review of drawings prepare by Trainee Technical Staff.
* Provide technical support to the other Department as may be required.

Senior AutoCAD DRAFTSMAN
OCEAN PACIFICO SERVICES, INC.
Bldg. 41 South Bravo Wharf Subic Bay Freeport Zone, Olongapo City 2000 Philippines
23 July 2004 28 February 2006

Sphere of Duty:
* Layout pipe installation for every system.
* Prepare bill of materials for fabrication of piping lines.
* Supervise as per instruction for fabrication of pipelines.
* Layout Engine Room Arrangement.
* Design typical drawing details of the ship.
* Revise mechanical and structural drawings for Lloyd's approval.
* Coordinate to the Shipyard Manager regarding on drawing revisions.
* Instruct the handled personnel regarding the drawing revisions.
* Inform the production supervisor about the design drawing issued.

AutoCAD DRAFTSMAN
OCEAN PACIFICO SERVICES, INC.
Bldg. 41 South Bravo Wharf Subic Bay Freeport Zone, Olongapo City 2000 Philippines
06 October 2003 to 22 July 2004

Sphere of Duty:
* Updates and revise Superstructure and Construction drawings.
* Sketch rush drawings for fabrication
* Discuss the drawing revisions to my immediate supervisor.
* Draw some as-built details for certification.
* Layout the interior design in the ship.
* Do other duties as assigned.

TECHNICAL DRAFTSMAN
POLARMARINE INC.
Bldg. 8487, Naval Magazine, SBMA Freeport Zone, Olongapo City 2000 Philippines
16 July 2002 to 04 October 2003

Sphere of Duty:
* Update drawing plans for Tank Cleaning Machine.
* Make instructional drawing for Polarjet Manuals.
* Draw new plans of Polarjet for machining.
* Draw and revise exploded view of Polarjet.
* Update production drawing master list.
* Make and adjust shadow diagrams.
* Create three-dimensional (3D) drawing for presentation.
* Do other duties as assigned.

AutoCAD OPERATOR/DRAFTSMAN
C. LAMIRA DESIGN & TRADING
Tuyo, Balanga city, Province of Bataan, 2100 Philippines
06 April 2001 to 10 May 2002

Sphere of Duty:
* Produce complete working drawings.
* Produce scheme drawings for housing projects.
* Provide technical support in Computer Aided Design.
* Assist in conducting field surveys for some projects.

EDUCATIONAL ATTAINMENTS

BACHELOR OF SCIENCE IN INDUSTRIAL TECHNOLOGY
Major in DRAFTING TECHNOLOGY
Bataan Polytechnic State College
27 March 2001

BACHELOR OF ARTS IN SECONDARY EDUCATION (Units)
Bataan Central College
22 March 2002

TRAININGS

ON-THE-JOB TRAINING
DRAFTSMAN / OFFICE CLERK
Petrochemicals Corporation of Asia Pacific
Batangas 2, Mariveles, Bataan
24 July 2000 to 09 February 2001

BASIC COMPUTER AIDED DESIGN
Bataan Polytechnic State College
Balanga City, Province of Bataan
09 to 16 May 2000

COMPUTER KNOWLEDGE

* Operate AutoCAD R14, R2000, & R2002 to R2005.
* 3D Modeling using Rhinoceros software.
* Photo editing with Adobe Photoshop.
* General Hydrostatic (GHS): Software to calculate trim & stability of ships.
* Microsoft Office.

OTHERS

Passport No.: KK601573

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2751 to 2800 of 6445)

Go to Search Parameters...

Brief Description

Instrument design engineer in BHEL (Bharat Heavy Electricals Ltd), Hyderabad, India in Control & Instrumentation (C&I) department in Steam Turbine, Compressor & Gas turbine Engineering division. DNV certified HSE lead auditor

Completions/Production Engineering Experience

I am a degree holder in Mechanical Engineering, having more than 13 years of experience in various types of Refinery and Petrochemical project.

Cost Engineer with exposure to Planning. Russian-mother tongue. English - fluent. Arabic - working knowledge

13 Years Strong Experience & Exposure in The Arena Of I&C Systems Successfully handled numerous large scale projects Worked with SCADA, PLCs and DCS Strong at commissioning, testing, documentation and handling of O&M Effectively led teams to deliver positive and timely results

13 yrs Professional Exp.which include Project Management, Engineering and Estimation. Responsible for the Implementation of QMS(ISO9001-2000). Countries of Work Exp: India,Singapore,UAE Languages Known:English,Hindi,Kannada,Tamil & Telugu.

Sap Basis consultant with 1.2 years of experience

Stability Analysis, Motion Analysis and Mooring Analysis of Ships and Offshore Structures

+1 YEAR EXPERIENCE IN PIPING DESIGN CURRENTLY IN DUBAI

I have completed my Diploma in Automobile Engineering (D.A.E.) with first class. Since then I have been relentlessly working to up date my knowledge in my field. Hence I have worked with various organizations on the same relevant line of work

LNG project cost controller , Project Field Change order preparation, vendors Back Charge notification, Warranty issues notification, bid and invoice evaluation. certificates management as per milestone completion and invoice approval.

7+ Yrs experience in PIPING (Power 5 Years, Process 2 Years),Capable to work with International standards like ANSI ,ASME,ASTM,BS,API etc and with Design code like ANSI 31.1, ANSI 31.3, ANSI 31.4. ANSI 31.8 etc,and with On shore/OFF shore ,Piping/pipeline (Power, Process, Oil & Gas ) with various

BS in electronic engineering and working as an electrical maintenance engr. key skills includes fault diagnosis and maintenace & troubleshooting of inverters,plc, sensors etc

HVAC Designer

I graduated from Middle East Technical University- Petroleum&Natural Gas Engineering department in 2006. Then, I started to work in a local petroleum company in Turkey as a drilling engineer. I was responsible from all the drilling operations in the field . Now , I am working as a mud engineer.

Completed B-Tech degree in Electrical & Electronics in the year 2006 with 70% aggregate from Caarmel Engineering College,Pathanamthitta,Kerala.17months in the field of Construction Supervision of E & I

Sr production engineer work in offshore and onshore seeking new job for more knowledge

Mechanical Engineer with 3 years design experience as well as field work experience. Skills include PVElite, AutoCAD, ASME Sec VIII Div 1. Field work experience maintenance & calibration, QC management, instrumentations, quality control log

SCADA Programming and Interfacing, PLC Programming and Interfacing, AC Drives Communication, HMI Programming and Communication .

MATERIALS ENGINEER/CONTROLLER/SPECIALIST-CATALOGUING-INVENTORY-PREPARE PURCHASE DESCRIPTION-ERP-SAP MM-CMT-STRING-E-SPIR-MMS Etc.

I am a CWI, Level II in MT, UT, PT and RT film interpretation. I have US and overseas QA/QC project and manufacturing supervisory experience in the construction, petroleum, mining and aerospace industries. References and copies of certs. will be provided upon request.

Professional trainings and practices in Geological and Mining Institutes including well site practices, modeling of gas reservoirs and underground gas storage production, geological prospecting and drilling geophysics, control properties of mud-logging and cementation

Team Leader Shift Supervisor, Trainer: Operation at Refinery Processing Plants, Remote Oil & Gas Production Field and High Pressure Systems at NGL Processing Facilities LPG Plant including Petroleum & Petrochemical Utilities. Professional member MInstLM & MCMI UK, MBA Prod. Ops. Management, BSc, BA

Comprehensive practical and commercial experience since 1997 in every aspect of cathodic protection systems on all types of structures, comprising detailed design preparation / engineering calculations and Preparation of proposals with design etc.

Diploma in chemical eng

Piping Draughtsman

Petroleum Engineer with 3 years experience in offshore drilling and completions operations supported by various trainings and certificates.

I ahve gained knowledge in the field of exploration and production. I have also done a course IADC WELL CAP which is internationally acclaimed.

SAP Basis Professional

DCS, Instrumentation, HMI, SCADA, PLC, Control System, Metering System

SCADA/ Substation automation with 3+years experince

Drilling Engineering Work Experience in high pressured directional wells : 3 Years, Sales and Services Experience: Recently joined a month ago

Condition Monitoring Management Consultant

Working as a Piping Engineer on software PDS with 3 years of experience. Worhing on oil &gas,chemical etc. projects

Versatile IT Project Manager with > 15 yrs experience in the IT and Upstream Petroleum Industry implementing IT solutions (including software, hardware, firmware);evaluating and recommending solution options, supervising solution implementation, and QA. Able to deliver Projects on time and on budget

Electrical Engineer with instrumentation and controls experience in the oil & gas industry. Practical knowledge of PLC, ignition systems, shutdown devices, temperature and pressure instrumentation and other controls systems.

I'm a diploma holder in Chemical technology having 12 yrs of experience in petrochemical field worked as Junior Engineer in Ammonia synthesis plant of all sections of desulphurization, catalytic reforming,CO2 removal, synthesis reactor, refrigeration, ammonia storage with adequate HSE practices

I am a mechanical technician I can do all rotary and stationary equipment jobs.

my expertise are using any release of autocad, rhinoceros for 3d and GHS for stability calculation.

Highly skilled professional, experienced as MAINTENANCE AND RELIABILITY LEADER for designing, manufacturing, maintaining and disposing assets, exceeding the expected performance and minimizing the impact to the environment with optimal cost.

Degree and diploma in chemical engineering.

Experienced in developing and delivering drilling plans, including wellbore and casing design,mud program,cementing program, directional plan, completion design, leading risk assessments, developing safety programs for workover, drilling and completion operations on exploration and development wells

Mechanical discipline. Construction LNG / Power / Oil and Gas. Middle Management .

Thirteen years of experience in quality and safety management roles of oil and gas industry, project management of Tension Leg Platform (TLP), semi-submersible floating production, FPSOs, and involved as an engineering project manager for designing various mechanical equipment systems for re

Manager with 14 years experience in Project control Management , Project Management & Contract Management

Electrical and instrument project manager construction, design and inspection

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Rotating Equipment Mechanical Engineer

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

First Prev 51 52 53 54 55 [ 56 ] 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out