Resume - Onshore pipeline(above ground/ buried)and Plant piping engineering and design. S...

Misco Jobs

Resume #5938

CONTACT INFORMATION:
View contact information...

Total working experience: 9 (+) years

Details:
Nov'96 – Till date: Technip.
-Working as Lead Engineer - Piping.
Onshore Pipeline, for Cairn Energy Pty. Ltd. (Front End and Detail Engineering)
Nature of work (as lead stress engineer): In Technip-KT India
* 3.6km 24" & 18" buried pipeline carrying Gas and crude Oil from onshore LFP to Slug catcher.
* Thickness calculation, Surge Analysis using PIPINET, Slug Analysis, Vertical stability Analysis.
* Calculation of forces on foundations due to slug in the pipeline /slug catcher.
* Flexibility Analysis (using CAESAR-II), Earthquake, Flange Leakage, Fluid Hammer Analysis.
* Preparation of documents, planning and coordination.
* Engineering as per applicable code, standards, regulations & procedures.

Hydrogen Plant, for ORYX GTL Qatar (Detail Engineering) For Technip-Italy
Berri Gas plant, for Saudi Aramco (Front End Engineering Design) In Technip-Italy
Ammonia plant, for Petro-Vietnam (Front End Engineering Design) In Technip-Italy
Nature of work (as lead stress engineer):
* Flexibility Analysis (using CAESAR-II) Static, Dynamic, Wind, Earthquake, Flange Leakage, Rotating Equipments, WRC-107, and API-610.
* Preparation of documents.
* Assistance in Equipment Layout.
* Recommend Pipe routing for critical lines.
* Check for support Feasibility as per Layout.
* Support marking and type of support.
* Engineering as per applicable code, standards, regulations & procedures.

Hydrotreater project, DHDT plant for IOCL Guwahati (Detail Engineering)
Naptha Hydro-treater Unit, Revamp for IOCL Mathura (Detail Engineering)
Nature of work (as lead stress engineer same as above): In Technip-KT India
* Preparation of documents for PMC (Engineers India Limited) review, and Licensor - UOP.

Sohar Reformer Package for Sohar Refinery Company L.L.C For Technip-Benelux
DCU Charge Heater for IOCL GUWAHATI
Combined Feed Heater for IOCL GUWAHATI.
Hydrocracker Heater for IOCL GUWAHATI.
Nature of work (as lead engineer-piping): In Technip-KT India
* Flexibility Analysis for Reformer / Heater coils.
* Flexibility Analysis for Transfer Line and other critical lines connected to Heater.
* Prepare and Update Design Basis, Technical Specifications, calculations for Detail Engineering, Prepare Drawing/sketches.
* Piping Study from P&ID and relevant documents.
* Pipe routing, nozzle orientation, platform.
* Evaluate BOM, Prepare Requisitions. Evaluate Vendor's offers and prepare technical bid summary
* Review of Vendor Drawing and Design.
* Engineering as per applicable code, standards, regulations & procedures.
* Co-ordination with Projects and other Engineering sections.

PSA Hydrogen Recovery unit for IOCL, Panipat and Numaligarh Refinery
Adsorber and valve skid for PEP unit for Nirma India Ltd.
Nature of work: In Technip-KT India (Manufacturing Unit)
* Mechanical Design of Process Equipment as per IS, ASME, IBR also using Codecalc software.
* Production planning and control for skids as per isometrics and co-ordination with instrumentation and piping sections.
* Project Planning, Material Planning and Procurement in the environment of Primavera 2.0. Co-ordination with client, sub-vendors and suppliers.
* Programming control for orbital TIG welding.
* Activities of inspection – dimensional check, MTC, radiography, MP Test, DPT, DFT measure and dossier preparation.
* Inspection at sub-vendor's shop.
* Involved in stagewise / final inspection. Dealing with Third- party inspection Agencies (LRIS, SGS, Bax counsel, IBR) and documentation.

NACE + HIC equipments, for PetroFac International
Ammonia Road Tanker, Chlorine containers, Incinerators, Claded equipments, Heat Exchangers.
Nature of work:
* Mechanical Design as per ASME codes, using Codecalc Software.
* Detailed Engineering of Static Process Equipment.
* Estimation, Project Planning & Material Planning.
* Preparation of Material/ Purchase requisition.
* Technical bid evaluation.
* Preparation of mechanical datasheets.
* Checking vendor drawings.
* Coordinating for design and drawing approval by client/third party.

May'94 – July'95: Aeromech Services, Aurangabad, Maharashtra.
Boiler and plant machinery for industries like Sugar, pulp and paper, pharmaceuticals, rubber and leather.
Nature of work: (As Engineer)
* Routine and periodic mechanical maintenance of Boilers (200 lts. to 10,000 lts.), economizers, and its accessories under IBR preview.
* Descaling of boiler tubes, refractory work.

PERSONAL DETAILS:

Date of Birth: SEPT 6,1970.
Nationality: Indian.
Gender: Male
Marital Status: Married.

EDUCATION/ QUALIFICATIONS:
Qualification: Bachelor of Engineering (Mechanical), 1995-96, with first division.
University: Dr.Babasaheb Ambedkar Marathwada University, Maharashtra, India.
Seminar: Communication and Networking Tools for CAD.
Project: Software for Design of Fuel Storage Tanks (software used AutoLISP and AutoCAD).
Sponsored by: Modi Mirrlees Blackstone Ltd., Aurangabad, India
Electives: CAD/CAM, Automobile.

INDUSTRIAL TRAINING:
1. Two months: Birla Kennametal,Waluj - ISO 9002. ( July 5,1993 to Aug.30,1993 )
Manufacturer of CNC Machines Tool Holders
2. One month: Pembril Engineering Pvt.Ltd.- ISO 9001. ( July 1,1995 to July 30 1995 )
(Group Company of Greaves India Ltd.)
Manufacturer of Fluid couplings.

ADDITIONAL:
Computer Literacy:
1. Caesar-II, Pipenet, Codecalc, PDS-6.1, Microstation, AutoLISP, AutoCAD-12, 1995 (through 2000).
2. Windows, MS-Office, and general office application softwares.
COURSES:
Repair and assembly of Television, Radio Tape and Home appliances, 1991.

ACHIEVEMENTS:
1. Awarded "Sudeep Chakrabarti Memorial Award for Innovation-2001" – by Technip KT India.
2. Awarded as nominee "Jacques Franquelin Award-2002" – by Technip Paris.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2851 to 2900 of 6411)

Go to Search Parameters...

Brief Description

I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.

seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units

Experienced mud engineer

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

A system engineer with more than ten years experience in process control and oil field development and implementation.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

Seven years experience.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Computer literate, Windows 98, MS Word, MS Excel, Powerpoint, Autocad 2D and 3D 2008 w/ color rendering

Water/wastewater Treatment, Hydraulic & Hydrologic Model

To pursue a challenging career and to put forth the best of my knowledge towards chemical process and engineering procurement industries.Also can do hardwork and be motivative towards the job undertaken

1 1/2 years as Jr Drilling Fluids Engineer, 15 years as water analysis, 5 years distillation.

Cable laying as per drawing

Engineering design of pipelines for natural gas transportation and production systems; evaluation of piping systems, development of piping material specifications, design of metering and regulation stations. Detailed design engineering using CAD.

Piping Engineer

Hydrogen Manufacturing, reformer, psa

Eight (8) years of very sound technical proficiency as a Piping Designer / CAD Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Offshore Platforms, Jackets & Process Equipments, Cross Country Pipelines including pumping stations & Water treatment Plants & Environmental Projects

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

Directional Driller

Instrumentation Graduate with hands on exposure in PLC programming and commisioning of PLC based Systems espescially,GE Fanuc,AllenBradelly,Beckener & Rainer (B&R).Hands on experience in Yokogawa DCS-CS 3000,System Engineering.

Stimulation Engieer

basic operation on CNC, Troubleshooting equipment Tools

Stratigraphy, sedimentology and depositional environments.

Process engineer with 3 years hands-on experience for Reliance Industries Limited India.

I have passed Diploma in Electrical and Electronics Engineering. Totally I have 12 years Experience in oil and Gas company and others.

Having three years of experience in the field of process engineering, B.E, Chemical

I am a Electrical supervisor in voltas company Abudhabi (UAE), in my concern it Shiek khalifa medical city for Electrical supervisor since past 2 years,and since before to still 9 years experience i had,7 years in india expererience and 2 years gulf experiece, i need Australia Goverment Job

PCS 7, TDC, C++, SQL,ORACLE 9i, WinCC,HMI

Responsible for actively involvement in the pre-commissioning and commissioning of the worlds largest natural gas plant

As Instrumentation Inspector/supervisor fully involved in construction,precommissioning,commissioning,start-up activities

Extremely motivated qualified geologist relishing new and dynamic challenges with a leadership role if required in a team or independently to achieve personal and company targets. Broad overseas experiences having worked in SE Asia and Europe and well-developed communication skills.

Master Technician (Mechanical)

Corrosion, Lab, Chemist, Oil & Gas

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

First Prev 51 52 53 54 55 56 57 [ 58 ] 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out