Resume - I am piping engineer with diploma in mechanical engineering to Poli- Technic ins...

Misco Jobs

Resume #59407

CONTACT INFORMATION:
View contact information...

Objective:

To pursue a career in my field of expertise (i.e. Piping Installations) that will continue to interest and challenge me. Your company could provide a perfect opportunity to achieve my goals. In order with my experience, I consider that a position not less than
Piping Section Engineer it is a fit position for me.

Personal assessment:

Date of birth: May 02, 1976
Place of birth: Medgidia, County of Constanta, Romania
Marital status: Married (one child)
Nationality: Romanian

Informational background:
Jan 2005 - May 2005 - Technical English Course, ¡* Ovidius¡¨ University Constanta
Sept 2004 - Dec 2004 - Initialization in Nuclear Power Plant Operation Courses
October 2000 - April 2001 probation military stagy in Navy Academy
¡* Mircea cel Batran¡¨ Constanta, Patent act of officer with distinction ¡* Aspirant¡¨
1995 - 2000 Technical University ¡* G. Asachi¡¨ - Iasi
1991 - 1995 Nicolae Balcescu High School, Medgidia

Qualification: mechanical engineer - 5 years

Foreign languages:
English - speaking, reading and writing - high level
French - low level
Computer skills:
Word, Excel
Experience:
1. August 2006- up to now: construction experience as an employee of Interconstruct `98
LTD working in Qatar as subcontractor to Consolidated
Contractors International Company(CCIC) in Qatar Gas
Expansion II Project.

Mechanical engineer employed as Piping Site Engineer in Utility Area especially for erection of six boilers fabricated by MACCHI TM a division of ¡* SOFINTER¡¨ S.p.A. Italy.

Also during this period I am involve in supervision of piping erection for Air
Compressors ¡* KOBELCO KOBE STEEL. LTD¡¨ (suction pipe and cooling lines), Boiler
Feed Water Pumps ¡* NUOVO PIGNONE BARI¡¨ (oil system; control oil, oil supply, oil return oil discharge, oil suction), Carbon Filter Package Train ¡* UNIDRO S.p.A >
Tecnologie per l¡¦ecologia¡¨,Steam Turbine Generator ¡* MITUBISHI HEAVY INDUSTRIES
< LTD¡¨(lube oil system).

Since September till now, under supervision of VENDOR, I am involve in follow activities:
* Graduating different courses; safety rules, materials control and traceability, quality control, quality assurance, Confined Space Entry Permit, Permit to Work sustained by CCIC Training Department, CTJV and Qatar Gas
* Coordination of piping, Air Duct and Stack items transportation between General Warehouse to the position of each one in site(using trailers, wheels cranes, boom trucks, fork lift)following planning indications
* Arranging a quarantine area located in site and specialization of a small team for segregation of different types of materials (received from Italy), used for erection of six boilers, with the purpose to control all materials coming from Italy with Packing Lists and to avoid any possibility of mixture with outher materials.
* Initialization of different types of permits (Confined Space Entry Permit, Man Basket Permit, Hot Work Permit, Gratings Removal Permit, Gas Cylinders Transportation) in order to respect the requirements of safety rules.
* Overall Supervision of including such as:
HSE, House Keeping, Piping Prefabrication including Pipe Supports, Piping
Installation including Pipe Supports, Spool Piece Control, Check and Monitor
Tools, Equipment, and Welding Consumables, Check and Monitor
* Performing daily tool-box with topics including technical and safety procedures complete approved by CTJV and Qatar Gas.
* Preservation, Pipe Internal Cleaning
* Schedule Monitoring for: Man-power Mobilization, Construction Equipment,
Welding Dia-inch, No of Spools, and Pipe Supports.
* Pipe Internal Inspection Witness for Large bore Piping
* Check if the latest Construction Drawings are Used
* Consult Engineering problem with Engineering Departement
* Check and Consult Spool Delivery at Site
* Check Work Front and Coordinate with Other Disciplines (Civil,Painting,Electrical grounding)
* Request Scaffolding Installation
* Aproval request for different Work Permit
* Erection of steel structures ( small platforms, leaders and steel structure supports), ASME piping and Non-ASME piping (large bore), segments of Air Duct necessary for piping erection, Silencers, Burners(under and with help of KOCH CHEMICAL TECHNOLOGY GROUP supervision),steam tracing pipe and Stack assembly.
* Inspections of the spools, dimensional, parallelism and flange alignment in accordance with piping isometrics.
* Fabrication preassembly of pipe using isometric drawings following material prescriptions punched or tagged on each spool (no. of drawing, no of sheet and quality of material ;Lalloy, Carbon Steel, NICE Carbon Steel, LTCS, Stainless Steel, Cooper, Galvanize).
* Erection pipe assembly fabricated using cranes, chain-blocks and lever-blocks and finalizes boiler lines with field weldings.
* Under VENDOR supervision, elaborating solutions for different modifications required by the steps of pipe and structure erection.
* Installation of specials devices: rupture disc; restricted orifice; water level indicators; sight glasses; gauges used in exploitation of boilers.
* Installation of different types of valves (ball valves, safety valves, check valves, globe valves, diaphragm valves (pressure relief valve), gate valves).
* Fabrication, solutions for different modifications and directly erection of different piping supports
* Check Flange Alignment of Rotating Equipment
* Check internal grinding of welding route of flanges for Restricted Orifices
* Using general plans, line list,bills of material, valve list and under Vendor supervision finalize complete erection of small-bore piping lines with field routed supports.
* Togheter with Engineering Departement and Q.C. Departement elaborating As-built small-bore piping drawings with welding map and field routed supports location using general plans provided by Macchi
* Perform Piping Line Check and initialization of preliminary punch list
* Follow Up of Punch Work following to kill A1 punch items for lines included in hidro testing and A1 and A2 punch items for lines under visual test
* Prepare Daily and weekly Report regarding of piping erection evolution and hidro test preparation
* Consult Punch work with CTJV Supervisor
* Perform Official Line Check
* Perform Back Check of Punch Work
* Check and Ensure Piping Test Preparation is Properly Made(test limits are box-up with temporary gasckets,original stud bolts and nuts are properly tighted,check valve or any outher manual vave connected by flange and included in test it is fixed with original gasckets color code already marked)
* Check and Review of Test Packs initial prepared following to have include all documents required by procedures(Internal grinding of welding route for restricted orifice's flange report,Stud bolts tightening report,Isometric Control Sheet,last revision of Hidro Test Flow Chart,Cleaning Report for Piping Spools)
* Coordinate and Consult with Other Discipline (Calibration Team, Pre-Comission Team,Civil Team) concerning in Testing
* Witness of Piping Pressure Test
* Check and Ensure Piping Flushing and Blowing Preparation is Properly Made
* Coordinate and Consult with Other Discipline concerning Piping Flushing and Blowing
* Perform Piping Reinstatement Work and Checking following last revision drawings and color cod for permanent gasckets, bolt and nuts
* Attend Daily and Regular Meeting about LNG general progress

2.September 2004 -August 2006: exploitation experience as an employee of CNE-PROD
Nuclear Power Plant Unit 1 Cernavoda

Mechanical engineer in Piping and Metallic Structures Design Department. In this period I was implicated in follow activities:
* Graduating different courses; safety, materials, quality control, technology of welding, nuclear power plant systems, initialization in operation of a nuclear power plant, piping technical design, initialization in ASME Code.
* Working in an engineering team who recorded date directly from field (sketches and measurements) for situations who become non conformance with good functions of Cernavoda Unit 1 Nuclear Power Plant especially for nuclear piping system.
* Giving some possible engineering solutions( based on these sketches and measurements, consulting experience of our partners(other nuclear power plants)and general codes: ASME,ASTM,DIN )for these situations who become non conformance with good functions of Cernavoda Unit 1 Nuclear Power Plant,
* Initialization of different engineering documents (DCN, MPA, DRP) with purpose to transmit these solutions to the team of calculation for stress analyses for final evaluation in order to optimized piping systems
* Supporting a good implementation of modifications by Maintenance Piping and Supports Department.
* Sustain in creation of documents revised after implementation.
* Recording in Unit 1 Nuclear Power Plant History Docket all modifications already implemented

3. May 2001 - September 2004: field experience as an employee of Nuclear Montaj SA
Nuclear Power Plant Unit 2 Cernavoda.
As new graduated mechanical engineer in this period I was implicated in follow activities:
a) September 2002 - September 2004: Piping Engineer Supervisor in Reactor
Building
* Leading worker teams in a professional manner following to respect quality and schedule requirement and a good safety level (weekly technical commissions followings indicated procedures complete approved by Management Team - SNN -AECL - ANSALDO)
* Full materials Traceability on.
* Fabrication and installing for spools using isometric drawings
* Inspections of the spools, dimensional, parallelism and flange alignment in accordance with piping isometrics. Pipe diameters (36¡¨-1/2¡¨ different materials: SS,CS)
* Installation of specials devices (rupture disc; restricted orifice; sight glass; gauges used in exploitation) in piping systems
* Installation of different types of valves (ball valves, butterfly valves, check valves, globe valves, diaphragm valves, gate valves)
* Also inspection the spools for Stainless Steel and impact tested Carbon Steel.
* Fabrication, stress analyses modification and directly installing of different piping supports.
* Pressure test
* Implementation quarterly Quality Assurance Program impress by Management Team.
* During of project implementation suggesting first possible solutions to non conformance situations under Engineering AECL coordination
* Working with employees of AECL (Canada), Babcock&Wilcox (Canada) and Ansaldo (Italy);

b)April 2002 - September 2002: Planning supervisor

* Preparing CWP (Construction Work Packages) as per due normative ¡* Instructions in calculation of required men-hours for each activity in gas line erection¡¨ by John S. Page for piping systems especially for non-nuclear systems.
c)November 2001- April 2002: Rigging Supervisor

* Leading rigging teams in a professional manner following to respect quality and schedule requirement and a good safety level
* Supporting erections of different piping and equipment items in Turbine Building and Pump House
* Initialization of a maintenance program for lifting equipments (hoists, monorails, cranes, etc.)
* Selecting a specially team for maintenance program of lifting equipments
Implementation d)May 2001 - November 2001: First assistant of Electrical Mechanical Chief

* Initialization of a maintenance program for all electrical tools (together and with consulting of safety department) based on a color code who asked for each month one specially color applied on each tool and changed monthly just if the tools are in good function condition

Other notes:
* driving license since 1999
* passport number: 06869996( available one year)
* single accommodation
* date of availability: after 30 days from your request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3801 to 3850 of 6411)

Go to Search Parameters...

Brief Description

Electrical & Instrument Designer

I am a Petroleum and Natural Gas Engineer having an MSc degree in Petroleum and Natural Gas Engineering from Istanbul Technical University, Istanbul TR.

A professional Electrical Engineer with skills and expertise in project, engineering and maintenance management spanning 20 years hands-on and managerial experience in a Petrochemicals Company and an EPC company. Seeking a rewarding position as a Project Manager/Leader/Sr. Project Engineer

TOOLPUSHER, DRILLING ENGINEER,DRILLER(TOP DRIVE).

am working as an Sr. CAD Engineer, presently working with Aker Kvaerner powergas Ltd at Mumbai. I have been till date worked with Major Pharma, Semiconducters & Engineering Design Consultants firms and Construction Companies at Middle East (8-year) & Bombay (10-years) for world wide various project

I have 25 years in the Construction QA/QC Management/Construction Management field. I possess excellent people skills, communication skills and coordinating skills coupled with the desire to be a team player.

I have good knowledge in oil and gas business related to commercial (Production Sharing Contract, fiscal terms, Joint Operating Agreement and Gas Sales Purchase Agreement). I have 10 years working experince including 5 years as commercial/business analyst and 5 years as process engineer.

Dedicated and highly motivated instrumentation & control engineer

Commissioning engineer of C2-cracker plant, Operation engineer of c2-cracker plant,operation engineer of gas refinery and SRU

I am N.Natesh Kumar(Instrument Engineer), completed my degree in 1997.I have around 8 years experience in Instrumentation Field. At present I am working in a Power Plant in Kuwait as Instrument Engineer(Maintenance). I am very much eager to work in rotational jobs.

Strong motivation for deepening of knowledge on engineering geophysics, both theoretical and practical. Willing to travel, strong and stable character, able to work in long shifts and under pressure. Interested in learning new technologies. Perfectionist in problem solving

I have three years diploma certificates in instrumentation and i have more then 20+ years experience in instrumentation at present i am working with american company at west africa on offshore platform in instrumentation departments.

Good knowledge in PLC & DCS, Instrumentation theories,3ds max,MAYA,Basic of C language.

Senior HSE Manager /Advisor and Environmental Sustainability Manager

Five years of industrial experiance including Oil and Gas as an Instrument Engineer. Erection, Commissioning, Calibration and Maintenance of field Instruments such as Analyzers, PLCs, Actuated valves, Transmitters, Well head control panels, Manifolds etc

Service & marketing Engineer

QC Inspector

I am a professional mechanical engineer, with 18 years hands on experience of pre-commissioning, commissioning, startup, and operation in oil & gas facilities and power plant generators.

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Provides support of ongoing onshore operations through the application of engineering to daily operation problems. Optimizing and de-bottlenecking production surface facilities.

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

I am graduae chemical engineer and have a 3 years experience as a process engineer. Currently I am doing my international post graduate degree in petroleum engineering in Technical university of Denmark.

Graduated as petroleum engineer, worked as plant treatment operator, reservoir engineer, production engineer specialist and production engineer

Field engineer with customer focused and team motivated success in operations conducted for local and international clients both on land and offshore installations

Seek a challenging position, where performance is rewarded with new responsibilities to build up my career ahead.

Qualification - M.Tech in Applied Geophysics B.Sc. in Electronics

instrument and control engineer working in oil/gas/petrochemical projects for more 4-5 years in big consulting engineering company in Iran. Bsc in electrical eng.-control

D.A.E Electrical I have 12 years of work experience in post of electric technician in Oil & Gas Company.

• Integral Productivity Engineer • Oil Well Optimization • Reservoir Management • Oil well maintenance (wireline, coiled tubing, fractures, gravel pack, chemical cleaning, snubbing). • Water Conformance

I have expertise in mechanical/petroleum industry

Project & Design Engineer

I have graduated in Electrical Engineering from a reputed institution in North India(MNREC, Allahabad) and have 12 years of experience in maintenance and handling of engineering projects. I am familiar with Electrical systems , Utility operation and Maintenance.

Engineer with fourteen years of experience in the oil industry, specifically in The Venezuelan Oil industry, where he has worked in different positions into the Drilling Management.

Mechanical Engineer with more than 5 years of experience in multidisciplinary projects specialized in Intergraph PDS 3D and SmartPlant P&ID

QA/QC Engineer & Welding Inspector

Have a part of the team surveying site routing and Designing the flow of Gas (Pipe Natural Gas) pressure in M.P. (Medium Pressure) or main in L.P. (Low Pressure) Gas Pipe Line (PE Pipe) using software Pegasus.

Bilingual engineer with experience in engineering and teaching. Experience in administration, group management. Dynamic and outgoing by nature.

Looking for work opportunities preferably in the area of Completions database administration/Punchlist/Handover. Work experience of over 10 years with 5 years in the Oil and Gas commissioning sector. My skills are multi-tasked mostly in project documentation and completions database administraton.

I am piping engineer with diploma in mechanical engineering to Poli- Technic institute "GH.Asachi" Iasi, Romania

Around 4 years of work experience in Field and Research areas. Willing to work in an integrated and friendly environment. Comfortable in communicating with all levels and ability to adapt to various team situations.

Draughtsman Mechanic (Autocad Operator)

Present function: Software developer

Safety officer - Graduation in BA--- _ Engineering Diploma in Safety-----

Diploma Mechanical Engineer with five years experience in Project Procurements

Industrial Engineer (Quality, Production, Customer Care, Suppliers)

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

EXPERIENCED PIPING ENGINEER WITH PDS ADVANCED EXPERTISE / TECHNICAL DATA SPECIALIST

Engineer /PGDBM 17 Years Experience in SCADA, PLC, Automation in INDIA, France, Gulf, Middle East

I am a graduate Mechanical Engineer having16 years Design experience with oil refineries and reputed Engineering consultancies. I am well experienced in all piping design activities including stress analysis.

Experienced hydrogeologist and groundwater modeler with PHD from USA and work experience in USA, Europe, and the Middle East

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 [ 77 ] 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out