Resume - Project Management / Engineering Coordination / Process Engineering / Business D...

Misco Jobs

Resume #5980

CONTACT INFORMATION:
View contact information...

SUMMARY
1. OBJECTIVE:
- Process Engineering / Project Management / Business Development

2. QUALIFICATION:
- Bachelor of Engg (Chemical) ¡VPassed in 1987 with Dist. & Merit List
- Master of Engg. (Systems) Passed from BITS(Pilani) I Div 8.25 CGPA
- Diploma Int. Business Management ¡V Passed from AMA with I Class

WORK EXPERIENCE:
* 17+ years with Multinational EPC Consultancy Companies for different Projects in Chemical, Petrochemical, Gas & Power Industry Worked in India (Uhde, BTS, TPK, etc), Indonesia (Pectech / Bechtel), Germany (Uhde GmbH), USA (ABB Simcon), Malaysia TPK & Italy
* Currently Working with Technip based in Rome - Italy & involved in execution of Oil & Gas, Chemical, Petrochemical, Power other EPC projects worldwide

4. MAJOR ACHIEVEMENTS:
- Process Engg / Project Management for Oil & Gas Project - Currently working on Unleaded Gasoline & Low Sulphur Gas Oil Project coming up in Gulf
- Power Projects - 430 MW Power plant & Pulp mill (6105 Adt/day) in Indonesia, 330 MW CCGT for Prai Malaysia etc
- Petrochemical & Chemical Projects like Caprolactam, Hydrogen Peroxide, Cryogenic Gas Storage & Handling, Chlor-Alkali, etc
- Offsites & Utilities like Demin / RO plant, ETP, Air Separation Unit, HVAC, Boiler, Waste heat Recovery, C.Tower, Inst Air etc
- Cost Estimation study for various Projects
- Procurement & Inspection of Process Packages, plant & machinery
- Business Development for New Projects, Equipment Packages & Technology, EPC Services - Preparation & presentation of Tech Offer; finalizing scope of services etc
- Perspective planning for Diversification of Large Process & Power plant
- Setting up Project Engineering dept / recruitment & training

5. COMPUTER SKILLS:
- Microsoft Office * Project Scheduler # 7-Project Mgmt software * Process Design software like HTFS for Heat Exchangers & ESI for pipe-size, Insulation etc * Fortran * HTML,WML * E-commerce

6. TECHNICAL TRAINING:
- 10-week on ProcessControl& Dynamic Simulation in ABBSimcon,USA
- Two week training on PS # 7 ¡V Project Mgmt SW frm Scitor Corp, USA
- On the job training on ISO 9000 Certification for EPC company

7. PROFESSIONAL MEMBERSHIP: „h Indian Institute of Chemical Engineer
- Institution of Engineer, India

8. LANGUAGE SKILLS:
- English & Hindi - Excellent Knowledge
- Marathi - Good Knowledge
- German, Italian, Gujarati & Bahasa Indonesia - Working knowledge
Note: Refer enclosed Annexure I for Professional Work Experience & personal details

ANNEXURE I

PROFESSIONAL DETAILS & WORK EXPERIENCE

1. COUNTRIES OF WORK EXPERIENCE:
- India (12 Yrs) - Mumbai, Gujarat, Delhi, Hyderabad (Engg, Chem mfg)
- Indonesia (2.6 Years) ¡V Pekanbaru(Engg,Power & Pulp mfg)
- Germany (16 Weeks) ¡V Uhde Dortmund (Basic Engg for H2O2 plant)
- USA (10 Weeks) ¡V ABB Simcon NJ (Process Simulation for MTBE)
- Malaysia (4 Weeks) ¡V Toshiba Engg &Const. Co(Gas based Power Proj)
- Italy (ongoing) - Italy (EPC Projects)
- Also traveled to Singapore, Canada, Malaysia, Belgium, Holland, Luxemburg, Berlin etc & several places in India and worked / interacted with companies in Japan, UK, Spain, Italy, Saudi Arabia, Sharjah, Finland, Sweden, China etc

2. EMPLOYMENT RECORD STARTING FROM CURRENT JOB:
Total Work Experience @ 17+ Years in Process Design, Engineering Management and Coordination, Project Management & Business Development for Chemical Plant, Petrochemical Plant, Power Plant, Pulp and Paper plants etc
A. CURRENT EMPLOYER: Leading EPC Company based in Italy ¡V Involved in EPC projects for Oil & Gas, Chemical, Petrochemical etc worldwide

POSITION HELD: Specialist (Packages for Oil & Gas Project)

PROJECTS/
PRODUCTS INVOLVED: Handling Different Packages for Oil & Gas Project like
- Amine Filtration system
- Waste Water Treatment Package
- Chemical Dosing Units
- Condensate Polishing
- Filtration package / Coalescers
- Nitrogen Generation Unit
- Catalyst Recovery Unit for PTA plant for BP

JOB ACTIVITIES:
- EPC (Engg, Procurement & Coordination )comprising of
- Preparation of Enquiry Specification
- Evaluation of Vendor Packages, Finalization of scope of supply, Performance Guarantees etc
- Review & Finalization of Engineering Documents & Specification, Support & Review of Process Engg
- Monitor Project Schedule & Cost Control
- Coordination with Client, Vendors, Contractors, Site, Licensors
- Management of Contracts, Resolving Contract Issues etc
B. FROM MAY 2001 TO AUG 2002: Toshiba Engineering & Construction Company (TPK India Pvt Ltd) belonging to world renowned Toshiba Group active in Turnkey EPC Contract for Large Power Plants world wide

POSITION HELD: Senior Manager (Project Coordination) for 520 MW Turnkey EPC Power Project in Ramagundam & 330 MW CCGT in Prai Malaysia

PROJECTS/
PRODUCTS INVOLVED:
- 2 x 260 MW Thermal Power Plant coming up at Ramagundam - a Marubeni Corporation's Turnkey EPC contract - Project to be developed for IPP (Independent Power Producer) BPL Power Projects (AP) Ltd comprising
- BOP Package like Water Treatment, Ash Handling, Coal Handling, etc
- 1x 350 MW CCGT Power Project for SDN Prai, Malaysia
- Standardization of Power Project Engineering activities
- New Project Proposals, Modifications, Revamps etc

JOB ACTIVITIES:
- Project Management & Coordination comprising of
- Assistance / coordination of Engineering & Project Management Activities for successful implementation of projects
- Evaluation of Vendor Packages, Finalization of scope of supply, Performance Guarantees etc
- Review & Finalization of Engineering Documents & Specification, Support & Review of Process Engg
- Monitor Project Schedule & Cost Control
- Coordination with Client, Vendors, Contractors, Site, Licensors, Management of Contracts, Resolving Contract Issues etc
- Interaction with Overseas & Site office for Smooth Proj. implementation

C. FROM NOV 1999 TO MAY 2001: Birla Technical Services - an Engineering (EPC) consultancy organization in India belonging to Birla Group and part of US$ 1.3 Billion Group turnover

POSITION HELD: Manager ( Process Engineering)

PROJECTS/
PRODUCTS INVOLVED:
- Ion Exchange Based Electrolytic Membrane Cell Chlor-Alkali Plant in collaboration with CEC Japan
- Process Package in Hydrocarbon from Westfield UK
- EPC / Detailed Engg services for Petrochem / Oil & Gas Plants including arranging Licensors and Process Know-how suppliers etc
- Turnkey supply of Water Treatment plant including RO, DM plant, Effluent and Waste Water Treatment plant
- Specialized software solution like Project Scheduler # 7 in collaboration with Cimage UK and Electronic Document Management System with Scitor Corp USA / CEPM, Water Management SCADA project with Eliop SA, Spain
- Specialized package units like Sulphuric Acid Concentrators in collab with QVF-UK, Sodium Hypochlorite plant & Brine Treatment plants, combined works for cross-country pipeline
- Specialized Membrane type cartridge filter with automatic dry solid discharge in collaboration with DrM Switzerland finding wide application in Catalyst Recovery, solid separation in Petrochemical and Power plant

JOB ACTIVITIES:
- System Engineering (Basic & Detailed Engg) covering activities like preparation of P&ID, PFD, Material & Energy Balance, Equipment specifications, Tech. Reco etc
- Assistance / coordination of Process Engineering & Project Management Activities for successful implementation of projects
- Preparation of Sales offer, cost estimation, pricing etc.
- Post sales coordination with Client
- Business Development activities like meeting and corresponding with prospective customers for new business..
- Tie-up with Licensors, Equipment Manufacturers and suppliers
- Managing Project Team including recruitment of consultants & engineers

D. FROM OCT, 1996 TO JULY, 1999: PT. Pectech (RAPP) Indonesia ¡V April Group¡¦s Consultancy / EPC Division involved in Chemical, Power, Pulp & Paper plants.

POSITION HELD: Lead Process Engineer

PROJECTS INVOLVED: Turnkey supply and engineering of Chemical Plants and Power Plant of 300 MW (Total 430 MW after expansion),
- Modification & upgrade of 120 TPD Chlor Alkali Plant (Monopolar Membrane Cell Electrolysis plant based on ICI Technology) supplied through Kvaerner Chemetics, Canada
- 110 TPD Chlorine Di Oxide plant from Kvaerner Chemetics, Canada (after expansion of existing 40 TPD CLO2 plant)
- 160 TPD Oxygen Plant from Nippon Sansoe
- 1050 TPD Lime Kiln from FLSmidth Germany
- Recausticizing plant of White Liquor production capacity of 29,500 M3/day from Ahlstrom, Finland
- Evaporator Plant (2 Nos. of capacity 900 TPH) from HPD, Spain to concentrate Black Liquor to be used as boiler fuel
- Power Boiler from Foster Wheeler Energia Oy, Finland of Capacity 130 Kg/s, 468 TPH, 140 Bar, 540 deg C, 314 MW.
- Recovery Boiler (2 Nos.) from Kvaerner Pulping, of Capacity 165 Kg/s, 594 TPH, 82 Bar, 480 Deg C.
- 3 Turbine Generators from ABB Turbinen, Germany (2 Back Pressure & 1 Condensing Turbine of 100MW each)
- Demin Water Plant of Capacity 6480 M3/day
- Mill wide Water Treatment Plant of Capacity 8200 M3/Hr
- Mill wide Instrument Air and Compressed Air System
- Dilute & Conc. Non Condensible Gas System ¡V Handling & incineration in Boiler from Kvaerner Chemetics, Finland
- Tieup / Interconnection with existing Power Plant of 130 MW
- Pulp Mill Expansion project from 1800 Adt to 6000 Adt/Day

JOB ACTIVITIES:
- Co-ordination / Interaction with consultants like BE&K ¡V USA, Bechtel-USA, Jaakko Pory-Finland & Simons-Canada
- Tender Inquiry Document preparation
- Technical evaluation & recommendation of packages for above projects
- Basic Engineering and extended Basic Engineering design of many interfaces (such as Process Plant packages, utilities & Offsites), cost control and follow-up with clients for any additional / new requirements.
- Review/Freeze-in & follow up of Process related documents like P&ID, PFD, Equipment List, Process Description, Interlocks, Influents & Effluents details, Pump Hydraulic Design, Tie-in and Interconnection between various suppliers
- Coordination and follow-up with other Engineering disciplines
- Coordination and participation in Testing and Precommissioning

E. FROM APR, 1995 TO SEP, 1996: Mardia Chemical Limited, Ahmedabad, Gujarat (a leading chemical and dyestuff manufacturing company)

POSITION HELD: Senior Manager (Projects) - looking after Process Engineering, Project Management & Engineering Co-ordination for different projects

PROJECTS INVOLVED:
- 350 TPD Chloralkali grassroot project (based on Ion Exchange Membrane Electrolytic Cell) with technology from Denora, Italy and Technimont- ICB, Bombay as detailed engineering Consultant
- 300 TPD Caustic Flaking Plant from Niro Kestner, France.
- 6 Million Kcal/hr Dowtherm Vaporizer from Struther Wells - USA.
- 3X60 TPD Hydrochloric Acid Plant from Graphite Vicarb, India.
- 6000 M3/Day of Reverse Osmosis Plant with Dow Membranes
- 100 TPD Chlorinated Heavy Normal Paraffin (CHNP) plant
- DCS (Distributed Control System) from ABB

JOB ACTIVITIES:
- Review & approval of Process Engineering Documents, Basic & Detailed Engineering packages, Technical specifications for above projects.
- Enquiry Specification, Bid Evaluation and Technical Recommendations.
- Techno-Commercial discussions with different suppliers, Finalization of scope of supply, technical details, Guarantees & order placement
- Participation in Kick-Off meeting, Freeze-in meeting and Design Review meeting with Licenser¡¦s, consultants
- Interaction and follow-up with Licenser's, Consultants, suppliers (vendors).
- Monitoring progress & follow-up for various open points, cost control.
- Presentation and Laisioning with Environment Pollution Control authority for obtaining environment clearance for the project.
- Tech. Presentation to Financial Institution's Committee for obtaining clearance for the project..

F. FROM MAY, 1989 TO APR, 1995: Uhde India Ltd - subsidiary of Uhde Gmbh belonging to Hoechst Group (now taken over by Krupp) engaged in Engg/Construction activities for Chemical, Fertilizer, Petrochemical, Power Plant etc

POSITION HELD: Senior Engineer (Process)

PROJECTS INVOLVED:
- Chemical Plants like Chlor-Alkali -150 TPD Caustic Soda & 50 TPD Caustic Potash for GACL Baroda based on Membrane Cell Technology.
- Petrochemical Plants like 50 TPD Hydrogen Peroxide for HOC Cochin, MTBE, 10,000 MT Cryogenic Ammonia Storage system for SPIC Tuticorin, 50,000 MT capacity Cyclohexanone plant for GSFC Baroda, Ethylene Oxide Handling for NOCIL, Perspective Planning for NOCIL and GACL for Petrochemical and Chemical Projects
- Offsite and Utilities
- GNFC Nitrophosphate plant -630 TPD Weak Nitric Acid Plant

JOB ACTIVITIES:
- Basic engineering for different projects involved preparation of material & energy balance Design basis, Process Flow Diagram, Line Sizing, Equipment Sizing, P&ID's, Equipment Specifications, pump hydraulic design, finalization of plant layout, instrumentation data (loop instruments summary and control valve specifications), preparation of equipment list, raw material and utility consumption table, wastes and emission data, electrical load list etc.
- Detailed engineering for different projects involved review of Basic Engineering Package Provided by licensors, preparation of inquiry specification for various package units and process equipment¡¦s, evaluation of vendors offer and giving technical recommendations to Client, revision of P&I to incorporate vendor data, confirmation of pump heads, Coordination with engineering department like Instrument, Electrical, Piping, Mechanical, Project, Civil etc.
- Cost Estimation and Literature Survey for H2O2 plant.
- Basic and Detailed engineering for utilities like Demin plant, Cooling Tower, Nitrogen, Steam, Instrument Air, A/C Unit.
- Engineering Man-hour Estimation & Technical Sales offer for various Chemical & Petrochemical Projects.
- Contract Preparation and finalization of Process Guarantees
- Basic & Detailed Engg for Hydrogen Peroxide plant, Chlor-Alkali plant, 10,000 MT capacity cryogenic Ammonia Storage Tank & Handling facility(Turn-key project) & Cryogenic Ethylene Storage & handling.
- Detailed Engineering for 50 TPD Potassium Hydroxide Project.
- Design of Ethylene Oxide handling facility including road tanker for Nocil/Shell, Bombay.
- Precommissioning for 600 TPD Nitric Acid Plant- 3 months at site
- ISO 9000 quality assurance procedures for a Consultancy company
- Market Analysis & prefeasibility studies for the prospective Chemical manufacturing Projects to be undertaken by M/s GACL, Baroda, India.
- Dynamic Simulation for Dugas MTBE project coming up in Dubai- worked for ABB Simcon, New Jersey, USA for three months.

G. FROM MAY, 1987 TO APR, 1989: Approx. two years Worked (for self-financing the education Master's Degree in Engineering) on ad-hoc basis for:
- 3 months in IIT, Bombay for Project Research on design and optimization of Semi-batch reactor
- 4 months in a Dyestuff Company Amar Dye Chem, Kalyan as Project Foreman- worked on H-Acid expansion project
- 3 months in Triangle Simulation, Vikhroli-worked on Dynamic Simulation of Gas Sweetening Unit at ONGC Hazira
- 12 months in BITS Pilani as Teaching Assistant for Thermodynamics and Lab Work
- 1 month in Century Rayon, Kalyan for in-plant training

EDUCATION:
- Bachelor of Engineering (Chemical) -Passed in 1987 with First Class Distinction and 4th in the University Merit List frm Jawaharlal Nehru Engg College, M. University - Aurangabad
- Master of Engineering (Systems) - Passed from Birla Institute of Tech. & Science, Pilani with I Class(8.25 CGPA)
- Diploma of International Business Management - Passed from Torrent's Amdavad Mgmt Association with First Class

AVAILABILITY:
3 Months notice contractually (but if Mgmt agrees ¡V early relieving possible)

OTHER INTERESTS:
Reading, Yoga Exercises, Meditation, Sudarshan Kriya, Reiki, Light music

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5601 to 5650 of 6443)

Go to Search Parameters...

Brief Description

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased

Senior Mechanical Engineer, Bachelor Of Engineering

I write to you seeking QA/QC Engineer’s position ( NACE Level II Sr. Coating Inspector & NACE Corrosion Technician ), which can utilise my experience in Quality Assurance, Quality Control and Operations field in coating Industry. In this context, I enclose my resume for your consideration.

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

Experienced heavy duty mechanic. Worked in workshop and field service. Managed workshop and fleet of field service vehicles. Engineering experience include testing and reporting on ADT’s. Currently employed by Bell Equipment Co. (Hitachi AH500 – AH300). Got experience on lots of different machines

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

Cwi/QA/QC Manager

Operations Manager or Shift Supervisor in a Power Plant

Rigging/Heavy Lift And Transport

Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Mineral Processing Engineer with in-depth knowledge and hands on experience in Analytical Laboratory Operations; Metallurgical Unit Process Operations

I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.

HSE Engineer

Proposals & Contracts, Commercials, Process & Technologies, Project Management

Project Management / Engineering Coordination / Process Engineering / Business Development

EE + Internatianal contracts egotiatins from proposal to contract concluding.

Trilingual Electrical Engineer

QUALIFICATION: DIPLOMA IN CIVIL ENGINEERING, GIS CERTIFICATE FROM JNTU UNIVERSITY, EXPERIENCE OF 7 YEARS IN DGPS TRIMBLE 5700, LEICA 1200, AUTOCAD2006

BSME Mechanical Engineer

Instrument Engineering, Calibration, Testing, Installation, Commissioning, Maintenance, Familiar with control systems like DCS/ESD etc. Familiar with Metering Systems

Over Four years of work experience as a Planning Engineer and one year as Maintenance Engineer. Superior Knowledge of Primavera 3.1, MS Project 2003/ 2007 and MS Office (particularly MS Excel) through proven experience in Project planning and intensive usage.

Experienced and hands on work on MTS, SEM, XRAY, Hardness, Optical Microscopy, Metallography, Lecos etc.

Civil Engineering, Piping Analysis Engineering

Senior Instrumentation & Control and Telecom-SCADA Engineer

ITI in Instrument Mechanic, diploma in Electrical Engineering 5th Sem, working in Procter & Gamble Company

Engineering Service Manager

Mechanical Engineer

Instrumentation & Commissioning Analyzer Engineer

Graduate Engineer / Junior Engineer

Welding and electrical and management and mining class 32 hour certified fork lift operator

Manufacturing, Maintenance, Sales and Service, Application Engg, Project Engg, Administration

Electronics and Telecommunication professional with exactly 12 years of rich experience in the domain of Technical Support, Operations and Maintenance, Training and Development, Relationship Management with reputed organizations.

Natural gas pipeline design, testing, supervision, route survey, standards , ASME, ANSI, ASTM, API, AGA, AWWA, AWS, Compliances Health, safety, environmental , SCADA, air, water quality, pressure regulation, metering, filteration, odorization monitioring, inspection, deatail reporting.

I would describe myself as a flexible and energetic engineer. My strength is in the use of reservoir engineering’s software Eclipse and Stars. I also have a good understanding of the reservoir engineering’s techniques, and of petrophysic and the interpretations of the information’s. In my final thes

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

My superior interpersonal and organisational skills and a proven ability to work in a variety of team and unsupervised positions will make me an invaluable member of an offshore HSE team.

Graduate (B.E) in Instrumentation & Control.Operation, Administration & Maintenance experience of working with leading O&M Company viz: SOGEX OMAN CO. (LLC), DCS Siemens Teleperm XP configuration. Had relevant short-term training in PLC. Interested in a career of system design engineering.

Piping and Welding Supervisor QA

Chemical Engineer with experience in proeudction and enigneering

More than 9 years of experience in the GIS Industry.

SKILLS SUMMARY Manager, with strong electrical and mechanical background, 15 yrs construction and maintenance electrical experience, 9 years mechanical experience, performed purchasing and business development skills,. Proficient in Microsoft Word, Excel,

I have over 27 years in mechanical repairs

Operations Supervisor - Overseas experience

I am diplomaed Engineer - geologist/hydrogeologist, having some experience in micropalentology.

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Siemens , Allen Bradley PLC programming, Honeywell TDC 2000 and Foxboro DCS programming and troubleshooting. Profibus Certified installer and troubleshooting. Project management. Wonderware InTouch and Citech SCADA systems. Excellent troubleshooting skills.

Environmental Consutlant/ Management - International Experience

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 [ 113 ] 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out