Resume - Developed test procedures and tested Power Plant Training Simulation/waste water...

Misco Jobs

Resume #5999

CONTACT INFORMATION:
View contact information...

PROFILE
Developed test procedures and tested Power Plant Training Simulation/waste water treatment/Marine process simulation software. Process calculation, numerical methods, and process control. Developed flow and high-performance computing. Software packages like simulation, performance and optimization Package for Power Plant.

SKILLS
* Developing thermodynamic models of Boiler, Turbine, Condenser, Air heater and Heater for power plant performance package.
* Developing Algebraic models for the process plant and solving the model using mixed integer linear programming.
* Design and developing of power plant training simulator.
* Design and developing of Waste Water Training simulator.
* Design of the boiler, turbine and auxiliary models of the Power Plant training simulator.
* Developing the pressure-flow network.
* InTouch and InControl tools for graphics and controls including extensive use of scripting.

COMPUTING & SOFTWARE
Visual Fortran, VB, ACSL, MATLAB, Wonderware Intouch (HMI), Wonderware InControl (control), office windows e.g. Word, Excel, Power Point.

EDUCATION
Bachelor of Engineering (Mechanical): 1996 - 2000 Bengal Engineering College, Deemed University, India

OTHERS
Date of Birth: March 01 1978
Marital Status: Single
Nationality: Indian
Passport No: A-8742414

PROFESSIONAL EXPERIENCE
From August¡¦2000 to till date
1. STEAG encotech India Pvt. Ltd.
2. SPAN

Performance Calculation Package of 250 MW Thermal Power Station
Languages: Fortran77
Platforms: DOS
Role: Creating different program modules for Boiler, Turbine, Air heater, Feed Water Heater etc.
Client: Suratgarh Thermal Power Station, Rajasthan.

Description:
This Power Plant performance Package consists of a set of modules, which compute the performance of the boiler, turbine, regenerative cycle, condensers and air heaters. The boiler efficiencies are computed by both the heat loss and the input/output methods. The package is based on ASME Performance Test Codes for Boilers, Turbines, Heaters, Air-heaters and other equipment and uses the ASME Steam Tables.

Job responsibilities:
Study the whole plant and draw the schematic diagram for different portion of the plant.
„« Development of the Boiler, Turbine, Condenser, Airheater and Heater models.
„« Plotting the curves from the Predicted Performance Data through Eureka package
„« Testing the whole package with the plant design data.
„« Running the package after interfacing with the DCS of the plant and testing with on-line plant data.

Energy Management System software
Languages: GAMS
Platforms: Windows
Role: Preparation of the mathematical model for optimizing the running cost of the plant.
Client: Vam Organic Chemicals Ltd, U.P.

Description:
This optimization software generates the recommended data sets for the distribution of steam (demand) among the different boilers and for the distribution of the power (demand) among the different Turbine-Generator sets and Diesel-Generator sets installed in the plant to meet the steam and power demand in the entire plant. It also controls the power distribution from different generator sets and Electricity Board supplier. The whole package is implemented to minimize the cost of power utilized in the plant and the cost of the generated steam, which is used in the process and to generate the power. The whole optimization process is treated as linear programming problem, which is solved using the GAMS software.

Job responsibilities:
„« Study the plant process. Draw the schematic diagram of the detailed process of the plant.
„« Analyze the detailed mechanical concept and ideas of the plant.
„« Develop the total optimization process software in GAMS.
„« Testing of the whole software in the running plant data
„« Making the feasibility report for the plant.
„« Installation and integration of the whole packages in the user interface software (in Visual basic)
„« Testing the whole-integrated software with the online plant data.
Developing the fundamental screens format of the Input, Output and Settings screens using MMI software - Intouch. - Interfacing the suggested output with the Excel 97. - Developing the fundamental screens format of the Daily report. - Developing basic cost comparison screen comparing the daily report and model running condition. -Testing the whole software in the running plant data.

Boiler and Turbine Training Simulator
Software: PRO-TRAX
Role: Simulating the modules of Boiler and Turbine for Training Purpose.
Client: Grasim Industries, Nagda, M.P.

Description:
This package simulates the Boiler, Turbine, air heater, super heater, and re-heater of the process plant to train the plant personnel. The mass and energy have been balanced.

Job responsibilities:
„« Data Analysis, Design, Coding, Calibrating, Testing, Integration, PFAT, FAT, SAT
„« Developing models in Fortran.
„« Built the tools for modeling compressible flow in ACSL, generating Boiler Drum module, Different heat transfer module such as airheater, superheater, reheater etc.
„« Interfaced the models with the controls and InTouch front-end graphics.

Waste Water Training Simulator
Languages: Visual Fortran 6.5, ACSL.
Platforms: Windows NT
Role: Modeling different equipment in the plant in Visual Fortran and ACSL.
Client: Montgomery Watson, Detroit city, US.

Description:
This toolkit allows the modeling of the waste water system such that the directions of change are captured correctly and mass balances in the system maintained. It will also include important plant mimics and the plant controls. However, the dynamics of the system are not modeled with high fidelity. This allows the plant operator to be trained on waste water system operations easily so that he or she can make a smooth transition to the new CRT based plant operations that are being installed in the city.

Job responsibilities:
„« Study all the system of waste water treatment plant, collection system and transmission system.
„« Preparation of schematic diagram for all system and sub-system for modeling purpose.
„« Developing different modules for the equipment in the plant in visual Fortran.
„« Generating Pr-Flow Matrix for a network using visual Fortran.
Making the 3-D Graphics user interface for the entire plant using MMI software - Wonderware - Intouch. Interfacing the MMI screens with Control scheme as well as entire model of the plant using Visual Basic.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4101 to 4150 of 6411)

Go to Search Parameters...

Brief Description

Power Plant Chemistry, Water Treatment Plant commissioning , Boiler Water Commissioning

acting in a operation and maintenance of several equipments, such as: Internal Combustion Engines ( Caterpilar , MAN MWM, Mitsubishi, Wartsila type W200, SACM type 240-D), Fresh Water Generators (Water Maker - MECO), Lubricant and Heavy Fuel Oil Purifiers (Alfa-Laval), Main Air Compressors, Pumps...

i have completed B Tech Computer Science Presently I Am Working In Satyam Computer In India As A Software Engineer

Proven oil & gas finder with approximately 100 prospects drilled (88% success rate) seeks position as an exploration, development or acquisitions geologist.

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

Skilled, versatile electrical engineer with 25 years experience in reliability engineering, project management, supervision, substation management, and problem analysis; knowledgeable in world cultures and adaptable to changing conditions.

14 years experience in pipeline construction, management and pre-commissioning. Worked throughout S.E Asia, Australia, New Zealand and Azerbaijan. Currently employed as a Project Manager for a major international pipeline construction company

Project Planning, Scheduling, Project Control,Project Monitoring, Project Coordination, Progress supervision, Costing, Estimation, Budgeting and Contracts Management for EPC Projects, Heavy Mechanical Fabrication & Erection,Civil,Buildings,Steel Structures,In plant Piping,and Turnaround schedules

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Experianced Well Operations Supervisor/ Completions Supervisor

International Project, Construction, and Contract Management

Behavioral Based Safety, Ergonomics, Human Factors, and Oil and Gas Construciton Safety Professional

M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.

Strongly involved in pollution prevention, management and control. Participated in pre-treatment of drilling oily wastewater/mud waste treatment in Agip-Saipem Rig -23. Presently exhibiting level 1 standard in Environmental protection. Good knowledge of design/fabrication of engineering facilities

Oilfield trucks mechanical technician

Field Technician

Geologist

Project Engineer (Instrumentation & Control)

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

3 + Years of experience in petrochemical industry-Electrical Engg

Marine mechanical engineer with good HSE and safety asspects

Petroleum Eng., Reservoir Eng., Highly Computer Skills, OFM Program and Eclipse Simultor, Well test Analysis, Open &cased Hole Logs Interpretation

Trouble-shooting and responsible to develop, coordinate and implement maintenance projects, understand customers, competitors and suppliers, from both an information and strategic viewpoint. Developing and mentoring technicians and also provide support for hardware and software maintenance.Exp:4yrs

Please find enclosed a current copy of my cv. I am extremely well qualified in Oil/Gas HSE and am well suited for this environment.

Mechanical Maintenance professional with exceptional interpersonal and communication skills and an extensive background in following broad based competencies: Static/Rotary Equipments Inspection/Repair, Gas Turbine O/H,ATR Material & Manpower Planning, SAP 4.6C PM & MM Module

male, 28 age years old. I have worked for Schlumbeger as Coiled tubing Field Engineer from 2000-2003. Now I work in Malaysia as a Coiled tubing consultant for Schlumberger.

4 year experienced Structural/ Operations/ Drilling Engineer. Working for a well known oil giant in Houston TX. Speak Fluent Arabic and English. Looking for a job in the Middle East.

Developed test procedures and tested Power Plant Training Simulation/waste water treatment/Marine process simulation software. Developed flow and high-performance computing. Software packages like simulation, performance and optimization Package for Power Plant.

I am a process engineer with over 4 years of experience to offer you. My recent experience was an operation engineer in a petroleum company,

10+ years experience in industrial and petrochemical, installations both onshore and offshore. Commissioning, construction, maintenance and inspection. Refineries, Gas Terminals, Offshore Platforms, F.P.S.O’s, F.P.U’s Pharmaceutical, Petrochemical, Power Stations, Gas Compressors and Generators.

Chemist with oil/petroleum experience.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

COMPUTER KNOWLEDGE: Done specialized CAD R 14, 2000, 3D modeling Auto Cad 2002 and 3D modeling Micro station 95, micro station J Courses with special reference to Drawings / Designs MS OFFICE msword,excel,power point

instrument & Control engineer exp. in marketing of Temperature measuring inst. since 2000

Objective: To utilize my computing and interpersonal skills in the Computer information industry.

Geological Technician Denver, CO

I am BE Chemical Engg from India, passed in 2000,was a gold medallist. I have experience from production to process engg and from administrative to marketing. I have worked in almost all areas of my stream to get the awareness of each part.

I hold a master of science degree in geophysics with geology background. I only practiced eight(8)months as seismic data acquisition geophysicist since after my graduation. At present I am a practising drilling fluids engineer.

I am a graduating chemical engineering student from the University of Waterloo. I have completed 6 work terms, 5 that were in the oil industry. I have had an excellent experience in each of these positions and have gained a wide range of skills that can be applied in the oil/petrochemical industry.

-welders/welding procedures qualification -piping erection -static equipment installation -material control

- Four years of experience as Petroleum Technologist in Schlumberger Oilfield Services. - I am familiar with the Technical aspects and Physics of hi tech logging tools. - I have undergone specialized training on Open hole tools and hold an excellent safety record

Reservoir Engineer, with 10 years experience both in oil and gas fields. Reservoir simulation studies. Assets acquisitions. Waterflooding

Inspection Specialist with more than 10 years in the Oil, Gas, Petro-Chemical and Power Industries, who utilizes strong organizational skills to identify and resolve technical issue and leadership abilities to maximize team talent and effectiveness.

Objective: To obtain a position where my experience, analytical skills and understanding of computers, networking, security and software can be used to solve engineering challenges

Job in QC analyst

Process/Instrument Technician with 10 years experience in Fault finding, construction, commissioning of various types of pneumatic and electronic instrumentation used within the oil and Gas Industry.

To seek further challenges as an engineer or related position where a diverse background and proven technical expertise used and advanced.

I understand from your advertisement that there are openings in reputed company for various posts with challenging responsibilities. I have special interests in QA/QC and wish to offer my services as QA/QC Manager/ Supervisor.

Highly motivated self driven individual with 20 years experience in the Industrial electronic, Instrumentation, processcontrol, IT and communications field. Specific experience in the mining and engineering field in managerial positions.

Seeking to get a job opportunity which ultimately leads to a prestigious career where my analytical & communication skills are developed and applied in Electrical power Engineering

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 [ 83 ] 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out