Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #60143 next resume »»
CONTACT INFORMATION:
View contact information...

Educational Qualifications

Course University Year of Passing % of Marks & Class obtained
B. Tech - Instrument Technology M.I.T. Madras 1982 64% - 1st class
B.Sc. - Applied Science P.S.G. College of Technology Madras University 1979 70% - 1st class
P.U.C. P.S.G. Arts College
Madras University 1976 80% - 1st class
S.S.L.C. Board 1975 77% - 1st class

Experience

Total Experience: 24 Years

From 21.04.2000 till date
Employer
International Power -UK
and
Ministry of Electricity and Water
State of Bahrain

Title: Instrument Engineer

Nature of Experience: Involved in the installation, testing & commissioning and maintenance of Co - Generation plant 2 x 140 MW ALSTOM make Gas Turbine Type 13E2, 2 HRSG Boilers, Combustion Engineering Supplied Aux boiler and 4 nos. of desalination plant of 30 MGPD capacity (each 7.5 MGPD capacity multi stage flash evaporators). Involved in the commissioning and maintenance of DCS system supplied by ABB, type Advant OCS system. Familiar with configuration, System Engineering, programming & trouble Shooting with Advant OCS DCS and Allen Bradly supplied PLC's of type SLC-05 series and HIMA PLC. Experienced with EGATROL systems for the Gas Turbine of ABB with HART Protocol and Field Bus Communication systems. Involved with Alstom commissioning team for system testing, site commissioning modification works and plant betterment and Updating.

Involved in the design, engineering, testing & commissioning of Phase II Combined Cycle Power Plant of 640 MW supplied by M/s. Alstom consisting of Gas Turbines type 13E2 and Steam Turbine. Experienced in commissioning and maintenance of ¡* Turbotrol¡¨ systems for Steam Turbines and ¡* Egatrol¡¨ systems for Gas Turbines.

Familiar with Project Planning with package with MS PROJECTS and CMMS package ¡* MAXIMO¡¨ supplied by MRO Software. Involved in the selection & implementation of CMMS package, (Computerised Maintenance Management System) LAN network for the power plant.

Hands on experience on AutoCAD 2000 systems.

From 12.06.1996 till 20.04.2000
ľ Employer
M/s SPIC Electric Power Corporation Pvt. Ltd
Chennai, India

Title: Member (Instrumentation)

Nature of Experience: Incharge of Project Engineering for specification preparation, detailed engineering and Procurement of EPC Contract, negotiation with bidders for the 525 MW Thermal Power Plant at Tuticorin in Tamilnadu. Involved in the selection of ABB as EPC contractor for the project. Involved in the tender proposals, selection of DCS ABB make Advant OCS system, various PLC's of Allent Bradley for the project and Triconex PLC's for the BMS.
Having experience in working ¡* Mark IV¡¨ systems for GE turbines.
Responsible for Basic & Detailed Engineering of I & C systems including DCS, Field Instruments and I/O list, Control Valves and Sizing, logic diagrams, cable schedules, interconnection diagrams, installation drawings and engineering. Familiar with ¡* INTOOLS¡¨ package for instruments design.
Involved in the finalization of power purchase agreement (PPA), environmental clearances and O & M Agreement with Power Gen. (UK).

From 29.07.1994 till 11.06.1996
ľ Employer
M/s Southern Petrochemical Corporation Ltd. (SPIC)
India

Title: Manager & Head of Department - Instrumentation

Nature of Experience: Responsible for selection, detailed engineering and Procurement for the petrochemical plant in SPIC. In charge of the erection, commissioning and maintenance of instrumentation packages. Responsible for the preparation of specification, engineering, erection, commissioning, configuring and maintenance of honeywell TDC 3000 DCS. Having excellent skills in Honeywell TPS system in configuration, GUS graphic building, CL programs, sequences & logics, PHD system and App-node with experience in OPC communications. Through in System Engineering & programming and experienced with PLC's supplied by Siemens, Allen Bradley, West falia & Westinghouse and Various analytical instruments, Control Valves, Hazardous area classification and smart field transmitters.
Having experience in undertaking annual turn around maintenance and Erection & Commissioning.
.
From 13.12.1993 till 28.07.1994
ľ Employer
M/s Grasim Industries
Karnataka, India

Title: Senior Manager - Head of Instrumentation

Nature of Experience: Grasim Indistries is manufacturing pulp and viscose fibers. Responsible for modernization of the pulp plant with YOKOGAWA Centum XL DCS system, Allen Bradley PLC¡¦s, smart transmitters and analyzers.

From 01.01.1993 till 10.12.1993
ľ Employer
M/s NTPC - Talcher Super Thermal Power Project
Orissa, India

Title: Deputy Superintendent - Instrumentation

Nature of Experience: Responsible for erection and commissioning of instrumentation packages for 2 x 500 MW steam turbo generators. Commissioned Bailey INFI 90 DCS system for burner management system, PROCONTROL P14 DCS system for turbine controls such as Automatic Turbine Run up System (ATRS), Electro Hydraulic system (EHC), Turbo Supervisory Instruments (TSI) and HP/LP by-pass system. Analog control system supplied by HITACHI & DDC MIS system for the whole plant successfully commissioned.

From 07.09.1983 till 31.12.1992
ľ Employer
M/s NTPC - Ramagundam Super Thermal Power Project
Andra Pradesh, India

Title: Engineer & Sr. Engineer

Nature of Experience: Worked in erection, commissioning, maintenance and planning department for 3 x 200 MW + 3 x 500 steam turbo generators. Worked in BMS system of Sie Forney Italy, Mark IV Turbine Protection Systems for 200 MW boilers supplied by Ansaldo Italy (Elsag) and Siemens Teleperm Series Analog control systems for 200 MW and 500 MW boilers. Commissioned 500 MW Turbine protection system supplied by KWU (Siemens). Involved in the maintenance of various analyzers, motor operated valves and UPS systems. Also responsible for planning, dept. setup, overhaul, short term and long term planning.

From 07.09.1982 till 06.09.1983
ľ Employer
M/s NTPC Corporate Centre
New Delhi, India

Title: Executive Trainee

Languages Known

Language Speak Write Understanding
English * * *
Hindi * *
Tamil * * *
Tamil Mother tongue

View contact information...
«« previous resume next resume »»
Search Results (Resumes 101 to 150 of 6411)Go to Search Parameters...
Brief Description
25 years experience as Water Treatment Specialist and Account Manager
+29 years of professional experience,7 years in materials laboratories and Seismological research Institutes, 22 years working for E&P oil and gas Companies in Venezuela.Expertise as Petrophysicist, background in science,extensive knowledge of computer language and application,experience in clastic
Electrical Engineer with more than 20 years of experience with PLC and HMI projects: Design, implementation and commissioning. I've worked in projectos for Food and beverage,
DRILLING ENGINEER
Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.
I GRADUATED FROM TULSA UNIVERSITY ,OKLAHOMA,USA,1985.WITH A BACHELORE DEGREE IN PETROLEUM ENGINEERING,I HAVE A 24 YEARS OF EXPERIENCE IN DRILLING INDUSTRY , IN THE PRESENT TIME I'AM WORKING IN AN OIL CO. AS AN OPERATIONAL MANAGER.
17 yrs of experience in oil and gas industry including current assignment on offshore installation operations support, most recent oil and gas terminal design projects, commissioning group support, treatment works and pumping stations rehabilitation, pipeline construction and offshore platform.
Thirty years of experience in EH&S in the oil, construction, and the insurance industries. Throughout my career I have managed the safety and environmental requirements for drilling operations, gas processing plants, and offshore platforms. Participated in design review, permitting, environmental
A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.
Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.
Has over 24 years experience in instrumentation oil and gas, power generation , and process industries. Working experience as Commissioning supervisor to carry out Erection and commissioning of Control Instrumentation system for process industries & Thermal power stations. Successful commission
Wellservices Slickline Supervisor for the past thirty years.
Work experiance in plant maintenace , hydrogen plant and rig component and complete rig manufacturing. Welding and metalergy testing. Rig inspections covering all aspects. Thanks.
Qualification: B.Tech - Chemical Engineering, Skills: Pre-commissioning, commissioning, start up, test run and handing over of the plant to the operation department
Engineer, since 1988 when I graduated the Institute of Oil and Gas ,Ploiesti, Romania (IPG Ploiesti)
Well Integrity Specialist, Completion Production Engineer
I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis
15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems
Sales and marketing,Business development
I senior completion and workover engineer 19 yeas experience
Integrity management engineer with world leading expertise
Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager
My working career was started from 1988 after pass out Diploma in Electrical Engineering 3 year’s course. I have total 20 years of experience in various fields. I will do all types of maintenance, troubleshooting & commissioning works.
C&I / DCS/Control System/Engineering/Project Management
Electrical and Instrument Project Execution, Installation, Precomm, commissioning and Estimating
Night pusher with 21 years experience in oil and gas industry
Installation, erection & Maintenance of rotary & stationery, light and heavy mechanical equipments on different projects such as continues Sand Casting plant, Textile Mills Machinery, automotive spare manufacturing industry , Caustic Recovery plant, Storage Tanks, Design / drawing and execution
I am a registered Electrical Engineer graduated from a reputed institution. I was connected with Philippine National Oil Company- Energy Development Corporation Geothermal Power Plant for more than twenty years. Ihandle the position as Shift Supervisor upon retirement.
Mud Engineer 20yrs + experience All mud systems
Working with FFC as a Senior Maintenance Engineer
21 years experience in Drilling Engineering.
Instrumentation Design and Drafting, Autocad and INTools user
Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455
Inspection/Welding Engineer
chemical engineer, skills: process safety management, HAZOP/HAZID, LOPA/SIL, RISK ASSESSMENT, HSE audit, contractor HSE management, Project HSE management
SAP, Kronos, Orcale, crystal report, business object, java, sql server,
Graduate Instrumentation Engineer with 19+ years experience as “Instrumentation Engineer- PMT/ EPC” in Pre-commissioning, Commissioning/ Start-up, Construction monitoring and Project management of major Overseas Oil & Gas (onshore) Projects
20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore
Over 20 years experience as a prospect generator and evaluator utilizing 2-D seismic and well logs. Understanding of business and financial aspects of exploration and production through CPA experience.
MECHANICAL ENGINEER
Engineering graduate in instrumentation & measurement,rich experience in erection & commissioning of instrumentation part of big project in areas like refinery, petrochemical & process plant,field+residual engineering during construction stage, inspection,as-built documentation,can guide a team of
Electrical Engineer - Testing, Commissioning, Maintenance, Planning, Reliability
Master of science in chemical engineering, positions such as technologist, process engineer and commissioning engineer. Strong backround in commissioning and stertup.
Mechanical Engineer/Supervisor(rotating machinery)
Don Westacott Chief Petrophysicist reservoir characterization and development of conventioanl and unconventional oil and gas reservoirs within US domestic and global sedimentary basins.
I am a Malaysian citizen with over 20 years experience in oil and gas and is currently employed by Qatar Petroleum as a Senior Development Geophysicist. I am an expert in Landmark’s Seiswork, Geoquest's IESX and Charisma 3D seismic interpretation, Z-Map+ and CPS-3
Electrical Engineer with 23 years experience in Oil & Gas Field
I am a candidate having Total 25 Years of Plant OPERATION and COMMISSIONING Experience in Petrochemical / Chemical with basic knowledge of all type of plant operations. I have specific experience in Pre-commissioning, Commissioning, Start up, Shutdown of Petrochemical Plants.
I have been working for 20 years in Oilfield as a Night pusher, Driller and Assistant Driller on different types of Rigs (National & Oral mash, BO, BD, Pyramid, sling shot, Joy Stick, Kelly and TDS…..), in many oilfield development and exploration wells, in various locations in Syria, Algeria, UAE,
Trade indentured Tradesperson with extensive Welding Experience
First   1   2   [ 3 ]   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com