Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #6048 next resume »»
CONTACT INFORMATION:
View contact information...

Objective:- To work in a competitive and proactive atmosphere where the national and international projects are dealt with its latest technology.

PROFESSIONAL EXPERIENCE    : 19 YEARS
Nature of works handled        :
•Working as a lead PDS designer for offshore/onshore structures and solving the administrative problems
Creating Modelling Areas
Attending trouble shooting
Attending client review (Design Review)
Evaluation of software.

•Preparation of Structural models in Framework Plus (PDS) and 2D extraction and underground piping modeling using PDS Piping Designer, Orthogen and Equipment Modelling.

•Leading a Team of Designers.

•Checking of Steel Fabrication and RCC drawings.

•Drafting of Structural Steel Fabrication and design drawings and detailing therewith including preparation of Bill of Materials for Offshore, Industrial, Commercial Buildings and Bridge Projects.

•Drafting works in Microstation-95, SE, J &V8.1 and in all versions of AutoCAD.

Presently working with         : KVAERNER POWERGAS LIMITED, MUMBAI.

DESIGNATION            : SENIOR DESIGNER (PDS)/CHECKER

Projects Handled            : 9-WELL PLATFORMS.

Checking all sorts of offshore well head platform drawings such as Jacket vertical and Horizontal Framing, Mudmat Framing Plan, Decking Framing Plan & Truss Elevations, Plating, Gratings, Hand rail, Staircases, Boat Landing, X-Mas tree Platform etc.
                
TEHCNIP, ABU DHABI
(Worked for Two years )
DESIGNATION            : SENIOR DESIGNER (PDS)/Structural

Projects Handled            : NORTH EAST BAB –Phase 1 Development
worked as a Lead PDS Designer for Under ground Piping, working by using PDS Piping Designer and Equipment Modelling and Orthogen.

TAKREER, Unleaded Gasoline and Low Sulphur Gas Oil Project
Solving the PDS administrative problems and working as a lead PDS Designer for this project. Modelling of Pipe racks and all civil structures and extraction of 2D drawings.

FUJAIRAH WATER AND POWER PROJECT
Solving the PDS administrative problems by working as a lead PDS Designer for this project

DRAGON OIL (offshore), LAM –A PLATFORM
Preparation of Structural models in PDS (framework plus) and 2D extractions, for jackets and platforms.

SOOROSH AND NOWROOZ (offshore)
Preparation of Structural models in PDS (framework plus) and 2D extractions.


JOHN BROWN TECHNOLOGIES (INDIA) PVT.LTD
BANGALORE, from Feb’2001 to May 2002
An ISO9001 certified Engineering Consultancy Company involved in design and detailed Engineering for Oil and Gas, Petrochemical, Chemical & Process plants.

DESIGNATION: SENIOR DESIGNER

Nature of Job                :
•Preparation of Structural models in PDS (framework plus) and 2D extractions by working as a lead PDS Designer.

•Checking of Structural Steel Design drawing & Fabrication drawing and drafting for Offshore structures.

•Preparation of MTO by using Autonesting and CP Manager.

•Apart form structural drawings, preparation/Checking of offshore pipeline drawings such as pipeline alignment, layout, riser assembly, approaches & departure etc.

•    N11 & N12 WELL PLATFORM

Client : MAZAGON DOCK LIMITED/O.N.G.C

Involved in preparation of Pre-bid engineering drawings viz. Jacket vertical and Horizontal Framing, Decking Floor Plan, Truss Elevations etc.(Microstation-SE)

•    HV WELL PLATFORM

Client : MAZAGON DOCK LIMITED/O.N.G.C

Prepared the structural model for decking.
Involved in preparation of drawings viz. Jacket vertical and Horizontal Framing, Decking Floor Plan & Truss Elevations, Plating, Gratings, Hand rail, Staircase etc.(Micrstation-95).

Involved in preparation of pipeline drawings such as pipeline alignment, layout, riser assembly, approaches and departure drawings for pipe lines of diameter 4”, 8”, 10” & 12”

•    WHITE TIGER OIL FIELD

Client: SEMBAWANG MARINE AND OFFSHORE ENGINEERING, Singapore.

Involved in checking (drafting if required) of design and fabrication drawings viz. Decking Floor Plan & Truss Elevations, Plating, Gratings, Hand rail, Staircase, Access platforms etc. for Water Injection and Power Generation Platforms.

Preparation of MTO by using Autonest and CP Manager for the above platforms.

•    BAY-UNDAN GAS RECYCLING PROJECT

Client: SEMBAWANG MARINE AND OFFSHORE ENGINEERING, Singapore.

Involved in checking of fabrication drawings viz. Decking Floor Plan & Truss etc.(Microstation-95)

•    SECON SURVEYS Pvt. Ltd.    : from Oct’2000 to Feb’2001
    Bangalore         Worked as a structural designer (contract basis) and
handled Structural drawings of RCC Girder bridges for their National Highway projects.

•    D-Tech, Consulting Engineers,    : from Oct’99 to Aug’2000.
Bangalore

DESIGNATION            : DESIGNER (CIVIL)

Nature of Job                : Drafting of Structural steel Fabrication Drawing including
Preparation of Bill of Materials, RCC detailing for Industrial, Commercial, Residential projects etc in AutoCAD2000.

•    Cruthi Consultants,        : from Jul’98 to Jun’99.
Bangalore
DESIGNATION            : DESIGNER (CIVIL)

Nature of Job    : Drafting of Civil & Structural drawings for various Projects like industrial, Commercial and residential etc. in AutoCAD Rel-14.

•    ENGINEER FORCE        : Worked as a Junior Engineer from 1986-1998.

Nature of Job                :-
•    Lead a team of draughtsman and Office staff and Organised the work.

•    Checked various Structural steel design/fabrication drawings, RCC detailing, Survey drawings (Topography & Profiles), Architectural drawings etc.

•    Preparation of Estimates for various Civil works such as Buildings, Roads, Bridges, Culverts etc.

•    Preparation of Contract Agreement, Tenders and Recording of Measurement Book.

•    Execution of Civil works by leading a team.

•    Prestressing of Bridges (Post Tensioning)

EDUCATIONAL QUALIFICATION
    
•    First Class Diploma in Civil Engineering.(3yrs)

•    Course in Practical Design of Steel Structures.

COMPUTER EXPOSURE
•    A course in “C” Programming
•    Microstation’95, SE, J & Framework Plus (PDS),
Piping Designer and Equipment Modelling

•    Diploma in AutoCAD (Rel-14) from CADD CENTRE
BANGALORE.
                    
•    Upgradation Course in AutoCAD2000 from CADD CENTRE, BANGALORE.

•    Working Experience in Autonesting & CP Manager.

•    Working experience in MS Office’97, MS DOS, Windows-95, 98, & Windows NT.
PERSONAL DETAILS

    DATE OF BIRTH        : 30 APR’1968.

    SEX                : MALE

    NATIONALITY        : INDIAN

    MARITAL STATUS        : MARRIED

    LANGUAGES KNOWN

    a) To speak            : English, Hindi, Malayalam & Tamil

    b) To read and write        : English, Hindi & Malayalam

    PASSPORT No        : A6969604 dtd 01-01-99.

OTHER SKILLS

•    Black Belt in Taek wondo
•    Instructor in Yoga.
•    Certified personal Trainer in Fitness (Weight Training, Stretching, Cardios, Nutrition etc.
•    Graduate in Silva 2000 (Mind Power)
•    Oraganised Healthy Technip, In Technip Abu Dhabi and classes conducted on health related matters.                

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1601 to 1650 of 6411)Go to Search Parameters...
Brief Description
Senior engineer (piping construction & mechanical installation engineer
•Installation, loop checking, Commissioning and maintenance of online Analyzers
Mechanical engineering (heat and fluids)
Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.
I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.
I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.
With fourteen(14) years experience in Piping Design and Field Engineering Works of various Petrochemical, Oil Gas Plant from feed engineering up to detail design. Capable of checking of piping design up to IFC drawing and with experience of site engineering works.
electrical technician to repair n maintain all HV/LV electrical machines n equipment,testing them, trouble shooting and corrective maintemance.3 yrs diploma cource completed in electrical engineering.11 yrs experience in electrical jobs.result oriented n confidence in work.
Excellent organization skills
Over 8 years experienced on diffrent type of rig work over,deep and ultra deep rigs which done explratery wells. i passed the Diploma of Associate engineering in Mechanical. I done Engine overhaulling CAT D398 & Draw Works overhaulling.
1990 Diploma in Mechanical Engineering
I am Bachelor of Science in Computer Science and Engineering.working as a SCADA Engineer in PGCB about 5 years.
Process operator of Fluid catalytic cracking unit and Hydergen gereration unit
Subsea Installation Supervisor of wellheads, XT,s and completions.
Total experians 8 years instrumentation and control technician
A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).
PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.
Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).
Experienced Supervisor in the Electric Submersible Pump Industry
*Offshore pipeline installation engineer, Project engineer in major pipeline projects
Reservoir Engineer
Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.
Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.
Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.
Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.
Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design
Free! Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.
Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument
15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa
ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point
Senior Chemical Integrity Engineer
Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation
Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance
I have 12 years experience in Automation(DCS & PLC). I also worked as project management.
I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc
For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.
Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.
Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.
I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.
I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....
A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors
INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks
Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.
SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.
BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)
Junior well engineer, Design engineer
Qualification: MSc Corrosion Control Engineering Experience
Instrument Engineer
Bachelor's in Commerce plus Mechanical Diploma
Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   [ 33 ]   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com