Resume - Certified Internal Auditor, international auditor

Misco Jobs

Resume #60909

CONTACT INFORMATION:
View contact information...

SKILL SETS:

Technical

„« Completes a variety of assignments such as drawings, specifications and other materials suitable for Procurement, Fabrication, Inspection and Installation purposes.
„« Preparation of piping layouts for plants.
„« Project Planning and Implementation.
„« Preparation of Bill of Materials, Technical data's required for tender estimates for EPC projects.
„« Preparation of Mechanical engineering computation and analyses.
„« Ensures compliance with required design safety factors, tolerances, and specifications.
„« Coordinates with other disciplines / Engineers.
„« Inspection of all types of Fabrication including Roller Conveyors, Potshells, Furnaces Structures, Super structures, Silo's, Tanks, Piping, Ducts, etc, and Vendor Inspection (Fittings, Valves, & Materials)
„« Reference knowledge of ASME codes like SECTION ¡V II, SECTION ¡V V, SECTION ¡V IX, ANSI B 31.3, API ¡V 650 and various British Standards.
„« Preparation of WPS & PQR for welding purposes for clients Approval.
„« Knowledge of various welding processes including Alumino thermic welding and techniques.
„« Equipment Erection, Alignment, testing and commissioning.
„« Preparation of Test packages, Turnover packages, Inspection Reports, Audit Reports,
„« Implementation of ISO 9001; 2000 Quality Management System single-handed, performed Audits and completed the certification process.
Personal
„« Good in analytical, design and problem solving skills.
„« Ability to work in a self-managed or team environments
„« Functions well in fast-paced, high pressured atmospheres

ACADEMIC & PROFESSIONAL QUALIFICATIONS

Bachelor of Engineering (Mechanical),
M.S.Ramaiah Institute of Technology, Bangalore University, Bangalore. INDIA, 1998.

Internal Auditor Training Course (IRCA 2001 & IRCA 2180 For ISO 9001; 2000),
Certified Internal Auditor, Bureau Veritas Quality International, Bahrain, 2005.

Registered in International Register of Certificated Auditors for Internal Auditor Grade

American Society for Non-Destructive Testing (ASNT-Level-II)
in RT, UT, MPT & LPT.
Vaigai Consultants, Trichy, INDIA.

AutoCAD 2000, 2004
CADD Center, Trichy, INDIA.

Supervisory Orientation Training in Safety,
Bechtel, Bahrain 2005

CSWIP 3.1 ¡V (U.K) Certified Welding Inspector

Member of Institute of Engineers (Bahrain Chapter)

FROM 11-2006 - Present COSTAIN ABUDHABI CO.WLL www.costain.com

Position: QA/QC Engineer

Presently working in the Das Island Offshore projects U.A.E for the Clients ADMA OPCO and ADGAS for Various

Maintenance Modification and Shutdown Projects related to Piping, Structures, Spheroids, Valves, etc.

* Performing Internal Audits for ISO 9001; 2000 Quality Management System.

* Develop project specific PQP, QCP/ITP & Work instructions for each section of the work.

* Inspections related to Materials, Welding, Testing etc.,

* Prepare and submit final test packages / dossiers like Material submittals, hydro test packages, Tie-in package, Civil, and final As-Built drawings etc.,

* Establish liaison with Clients on all matters relating to QA/QC.

* Review and control deviations in the construction activities with particular focus on QA/QC activities

Performed the QA/QC Activities for MARGHAM DUBAI, Ruwais Shut down projects carried out by COSTAIN. Involved in the Quality control of all Mechanical jobs including the inspection of Vessels, Tanks, Flare, Orifice Plates, Testing of PSV'S, Hydro Testing of Air Receivers, Flange Tightening of High Pressure Lines, Preparation of Handing over Documents, Inspection reports etc. Co-ordinate with the Client and Third Party Inspectors.

FROM 6-2004 TO 8-2006 ATLAS MECHANICAL ¡V Bahrain

Position: QA/QC Engineer

Performed the QA/QC Activities for the ALBA / Bechtel's Line 5 Expansion project in the Fabrication and Installation of the entire Alumina Handling Systems, and inspection activities for the Bath Treatment Plant for Silo's, Ducts, Structures & Piping etc.,

JOB DESCRIPTION

Preparation of ISO Documents like Quality Manual, Work Instructions, Quality Procedures and formats for the Management Activities in Mechanical Division. Implementation of the Quality Management System in ISO 9001; 2000 Standards. Preparation and performance of Internal and External Audits

* Primarily responsible for the Implementation of the QMS ISO 9001:2000 and the Certification process
* Performing Internal Audits for various departments.
* Co-ordination with the certification body.
* Preparation, Implementation and monitoring Quality plans, Quality Procedures & ITP'S

* Preparation of Project Quality Plan, Quality Procedures for clients Approval.
* Preparation of Inspection and Test Plan for the Project
* Preparation of Method Statement for Hydro / Pneumatic Tests of Compressed Air Lines.
* Quality Control Activities like Inspection of In-coming Materials, Fabrication, Welding, Erection, Alignments (HDPS Conveyors, Blowers, Compressors, Aeration Fans) etc.,
* Performing Painting Inspection & prepared Inspection Reports
* Witnessing, Interpreting and coordinating NDT activities like DPT & UT.
* Responsible for the Preparation of Inspection reports for Material Inspection, Blasting/Painting, Welding, NDE, Erection and Alignments (Compressors and Blowers) etc.,
* Responsible for the preparation of Test Packs for Hydro / Pneumatic / Service Tests & submission to Client, Inspection and Witnessing of Tests.
* Co-ordination with the client for Quality Related matters.
* Involved in the calibration of measuring devices and gauges, both in house and External Calibration..
* Preparation of ITP's, Quality plan for BROCHOT Roller Conveyors
* Performing inspection for BROCHOT Roller Conveyors, fabrication, Assembly, Mock Test, Painting, etc,
PREVIOUS PROJECTS SUMMARY

[2-2003 till 3-2004] As QA/QC Engineer, Panipat Refinery ¡V Haryana.
DEPL, Larsen & Toubro Limited.
Fabrication and Erection of Reformer Package (Ref-77)
Fabrication and Erection of Heater Units.
Fabrication and Erection of Chimneys (76 &77).

[6-2002 till 1-2003] As QA/QC Engineer, Reliance Polymers ¡V Nagpur.
DEPL, Sathnam Engineering Pvt.Ltd.

Erection of Equipments, Pumps.
Fabrication and Erection of Polymer Piping, Shut down.
Fabrication and Erection of Unit Rack Piping.

[9-2000 till 7-2001] As Engineer IBIL ¡V Chennai.
Fabrication of Boiler supporting structures and Accessories.

[9-1999 till 8-2000] In Quality Control & Planning depts.
Neo Structo Construction Ltd., ESSAR Projects Ltd. (Fabrication & Erection of 2m dia Cross Country Welded Pipe Line for GWSSB/ SPP II Project), Amdavad, Gujarat.

[11-1998 till 9-2000] As Engineer (QA/QC)
Neo Structo Construction Ltd., Reliance Petroleum Ltd. (Process Piping, Structural & Equipment Erection), Jamnagar, Gujarat.
Successfully completed welding Inspection of piping, structural, & RT film
Interpretation for the Plants Amine, Coker & Sulphur Granulation.

PREVIOUS EXPERIENCE SUMMARY:

Duration: June. 2001 ¡V Feb. 2004
Organization: Dorman Engineering Pvt. Ltd.
Designation: QA/QC Engineer.

Worked as QA/QC Engineer in Various Sites and Shut down jobs. (Both Structural & Piping in Fabrication & Erection)
Job Responsibilities:
* Inspection of Materials for Piping and Structural with respect to the required standards.
* Inspection of Alignment and Orientation for structure & piping.
* Inspection of Edge preparation before Welding.
Welding
* Monitoring Welding parameters & Implemented GTAW, GMAW, SAW, & SMAW welding methods.
* Conducting Welder qualification tests.
Inspection
* NDT Methods like VT, PT, MT, UT, & RT.
* Conducting Hydro Testing & Pneumatic Testing.
* Conducting Hardness Testing & Pin Hole Testing
* Inspection of Heat Treatment, Sand blasting &Painting.
Documentation
* Preparation of Reports like Fit up & Welding, DPT, Radiography etc.,
* Preparation of B.O.Q's from Structural Drawings.
* Preparation Documents for Billing and Reconciliation Purposes

* Preparation & Review of Progress reports Daily, weekly & Monthly.

Duration: Sep. 2000 ¡V June 2001
Organization: IBIL Tech Limited, Chennai.
Designation: Engineer.

Job Responsibilities:
* Coordinating with the client and reviewing the project status on weekly basis.
* Coordinating with the Design Department and Manufacturing Unit and Sub - contractors to ensure the delivery of the finished products. Receive reports from Site Engineers and update the project status.
* Inspection of fabricated items at the sub-contractors site along with Quality Control Engineer.

Duration: Nov.1998 ¡V Sep.2000.
Organization: Neo Structo Construction Limited.
Designation: QA/QC Engineer.

Job Responsibilities:
* Inspection of welding quality in Structures & Piping. The NDT Inspection involves DPT, MPT, and RT.
* Conducting Hardness Test and PWHT
* Preparing Records this involved welding procedure specifications, welding procedure specification Table, Welders coupon etc.
* Qualified welders for carbon steels, and stainless steel.
* Study the P&I Diagram and verify the positions at the site.
* Assisting in managing and supervising the execution of Pipe Lines Construction.
* Coordination of Radiography with external agency and interpreting the results.

COMPUTER KNOWLEDGE: AutoCAD 2000, 2004, MS Project, MS Office
Some of the Projects / Jobs Handled are

1. Project Name: Alumina Handling for Alba Line 5 Expansion Project
Position: QA/QC Engineer
Client: Bechtel International
Fabrication & Installation of the Alumina Handling System from the stage of fresh Alumina powder from the Unloading pit, filters through out its various process through the conveying boom silo's, Airgravity conveyors, Air lift vessels, Air lift pipes, HDPS conveyors, Chain conveyors, Insulating Air conveyors up to the potshells with the use of blowers and compressors for the 2 x 1.1 km long Potrooms.

Handled overall project from the initial stage of preparing the quality Plan, ITP, Welding procedures, Welder qualification, Inspection of Materials, Installation, Alignment, pre-commissioning and commissioning activities up to handing over.

2. Project Name: Fabrication & Erection of Bath Treatment Plant
Position: QA/QC Engineer
Client: Alutec International, Australia.
Fabrication & Installation of the Bath Treatment Plant for Aluminium Bahrain, which process the crushed bath from the potshell.
Involved during the conception stage of the project from detailed Engineering for the Structural columns, Beams, and piping sizing and layout, structures, Inspection of the materials with acceptance standards, Stage Inspections through out the various Manufacturing processes up to Erection, testing, commissioning and start up of the plant.

3. Project Name: Fabrication & Installation of Roller Conveyors for Rodding Plant, ALBA
Position: QA/QC Engineer
Client: BROCHOT, Germany.

Increasing the Carbon Handling Efficiency of Rodding plant by modifying the existing Roller conveyors.
Fabrication of the conveyor frames, and its accessories including all sheet metal work, Assembly of the Rollers, bearing blocks, motor covers, sprockets, and chains, etc., Performing the mock test in the Shop floor before installing at site.

Checking the Fabrication Drawings, Sorting out the Requirements of individual items. Responsible for the fabrication of the items on priority basis. Involved in all the Inspection stages including mock test after assembly and Alignment of the conveyors.

4. Job: Refurbishment of Pot-Shells and Over Hauling of Super Structures.
Position: QA/QC Engineer
Client: ALBA, Kingdom of Bahrain
Repairing of the Pot-shell after the cut-out from the pot rooms Fixing of plates, Beams, and stiffeners as per the required dimensions and modify if required with the consultation of the ALBA Engineers. Peforming the Over Hauling activities of the Superstructure, including preventive maintenance in the scheduled time.

Worked in some of the Projects like
* Planning, Execution for the Fabrication & Erection of Reformers & Stacks, I.O.C.L Refinery Panipet.
* Welding Inspection of piping, structural, & RT film Interpretation for the Plants Amine, Coker & Sulphur Granulation. Jamnagar Refinery, Gujarat

COURSES / TRAINING / SEMINAR ATTENDED

* General Offshore Safety Training at ADMA OPCO Abu Dhabi,
* General Safety Training Course (ADGAS) at ADGAS Training Centre,
* General Safety Training Course (ADMA-OPCO) at ADMA-OPCO Training Centre,
* Advanced Safety Audit Course at ADGAS Training Centre,

* Basic Fire Fighting / Breathing Apparatus Training Course at ADMA Fire Service Training Centre,
* Work Permit System Course at ADMA-OPCO Training Centre,
* Permit To Work (PTW) Certification at ADMA-OPCO Training Centre,
* Hydrogen Sulphide (H2S) Awareness Course at ADMA-OPCO Safety Training Centre.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 6432)

Go to Search Parameters...

Brief Description

Piping specs, equipment layouts, Piping General Arrangement drawings and Piping isometrics including BOM.

Electronics Technician

PDS Piping Designer, SmartPlant Review (SPR) v6.1, Proficient in Microstation J/ Modeler Ver. 7.1, Proficient in Microstation/J v7.2, Proficient in AutoCAD (2D & 3D drawing applications), Knowledgeable in Plant Design Management System (PDMS ), Knowledgeable in Bentley AutoPipe (Pipe Stress Analy),

I have degree in Civil engineering and 6 years experience with Oil & Gas Industry(Kuwait,Qatar,U.A.E,Georgia).I have valid driving licence of Qatar/U.A.E/Oman.Execution of Pipe rack foundations,Static/Rotary euipment foundations,Turbine,Boiler,Flare foundations, Control bldg and Sub station bldg.

• Over 15 years of experience in Petrophysics (Exploitation and Reservoir characterization)in clastic and complex carbonate reservoirs. • Detailed experience of acquisition, quality control, interpretation and evaluation of petrophysical (wireline, LWD and core) data.

Seeking a challenging and rewarding Chemical Engineering position with a progressive company.

handle the Project Independently, Installation Instruments* Loop Checking* Site Design *F&G System *Pre Commissioning Activities Erection of DCS,PLC *Knowledge of Analyzer System *Experienced in Senior levels *Good Leadership quality *Good interpersonal relationship

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

pipelines engineer, mechanical engineer

I am presently working as a field service representative for Ecolochem International,Inc. Presently assign in an Onshore Gas Plant for Shell Exploration Philippines. I work also as a assistant driller for Sedco Forex Sclumberger.

I am a Mechanical Engineer with Master degree in Mechanical Engineering,

Objective Secure employment in the petroleum industry working in reservoir exploitation, well planning, and/or completion operations.

German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.

Extensively experienced with the specification, bid evaluation and purchasing of mechanical equipment and pipelines.

I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.

12 years oil&gas experience geologist& mudlogger,8 years environmental scientist, MS&BS Degrees in Geology, recent education includes 32 semester hours of business and computer courses, 1989&90, 3.7GPA, 20 semester hours of graduate courses in environmental science, 1997, 4.0GPA

Seeking an opportunity to work in a professionally managed organization

Control System Hardware Design for DeltaV/ DCS

Subsea Pipeline Engineer with experience in the field of engineering (FEED & Detailed Design), material, installation and cost estimation.

Construction, Commissioning and Operation & Maintenance procedures including emergency response procedures in line with best industry practices and based on approved applicable standards, Engineering for Procurement, vendor drawing review, site co-ordination and supervision, installation and commiss

Based on my experiences and knowledge in implementing the safety procedures and teaching the safety techniques in working safely, I'm very confident to be a part of your good office. I promise to help your company Incident Injury-Free

I am a Qualified and experienced NDT INSPECTOR with ASNT LEVELII, and Diploma in mechanical enginner

Around 7.0 years of experience in design & construction of power plant structures, EHV indoor and outdoor sub-stations, industrial & residential structures.

Aspen 12.1, Pro II, HYSIS, DMC, CONTROL STATION

Reservoir engineer

Inspecton & certification of coating work

A highly motivated, team spirited and performance driven engineering professional with an extraordinary blend of experience in Petroleum refining industry. Recognized for keen ability for improvement in reliability of a wide range of static equipment like crude oil heaters, high temperature hydrogen

PDS, PDMS, Smart Plant Review, navis work

Certified Internal Auditor, international auditor

Chief elecrician !!!

Material Management, Inventory control, Procurement, follow-up,Procurement Planning etc

A visionary executive with 16 years experience and proven history of outstanding performance in Industrial automation & Instrumentation in Project Design, Application and Development. Dynamic, skilled specialist with excellent record in Power, Refinery, Oil & Gas, Polyester, propylene, Pulp-Paper

Mechanical Engineering Technologist

Well logging, seismic data interpreting, sea mapping

Work History in brief: Hay Engineering Ltd - 1985-89 Sedco Forex - 1989-94 Retsco Intenational - 1994-99 Finnco Ltd - 1999-2000 Transocean Deepwater drilling - - 2000-2003 BP-CNOOC - - 2003 - present.

Experienced Cad Manager. Primary system experience in Autocad, Multisuite, Autoplant, CadDuct, ADT33. Other systems experience in MIcrostation, PDMS, Prime Medusa. An engineering background in Structural/Civil.

Bachelors in Technology - Chemical Engineering – 14 years performing works on: Hysys, Pro-ii, Pipe Phase, Sinet, AutoCAD, AutoLISP, Micro-Station, 3Dstudio Max, Primavera, MS-Project and MS-Office products

Objective To provide solutions that will maximize productivity and profits Status

33 years in various survey disciplines. 21 years onshore and offshore experience in hydrographic, engineering & seismic survey (hands-on surveys), & more currently in the last 13 years, navigation QC and Project Management.

The last 8 years I have been working mostly in Asia in Instrument and Metering engineering and Process Supervisor positions. I am experienced in working with Nationals and using CBTA on the job training and assessment methods. I currently have a valid BOSIET certificate.

Industrial and Heavy Equipment Technician

25 years experience operator / contractor experience willing to relocate status: single

Looking for work as an instrument tech. in the oil industry.

21 years in oil & gas From Insp Eng to welding inspector Exp on new and in-service plant QA/QC & clients rep on jacket & module fabrication Senior insp sub-sea pipelines, offshore platform hook-ups Insp Eng and plant insp on oil & gas platforms Familiar with most intl. codes & standards

Interrested in rotational international opportunities in Maintenance Management or Senior Maintenence Planning positions

GIS Professional with an excellent background in Geomatic and engineering work. GIS experience included pipeline route planning utilizing GIS/DSS, land use changes utilizing GIS/RS data, advanced RS researches using Airphotos, Hyperspectral image analysis.

Electronics / Electrical Technician

24 years in Pipeline Construction, Operation, Inspection, Precommissioning and Commissioning both Onshore and Offshore

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

Please see resume for full details. Thank you

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out