Resume - I have worked for over 10 years for Schlumberger Oilfield Services. My career w...

Misco Jobs

Resume #6095

CONTACT INFORMATION:
View contact information...

Objective

To obtain employment in an area which will provide an opportunity for the utilization of my skills and knowledge in field operations / engineering and which will allow me to return to the state of Wyoming.

Education

University of Wyoming, Laramie, Wyoming
Degree: B.S. in Chemical Engineering
Graduated with Honors in December, 1993
Overall GPA: 3.9+ Engineering GPA: 4.0

Kelly Walsh High School, Casper, Wyoming – 1986-1989

Work Experience

Feb 2003 to present, Sr. Schlumberger DESC Engineer - BP Houston

Responsiblities include client support, fracturing treatment design/evaluation for wells in BP's Rockies Business Unit (Wamsutter and Jonah/Pinedale) and liasion with field operations. Modeling and evaluation are performed using FracCADE software.

Responsible for the introduction on new technology as it applies to BP requirements (ClearFRAC, CoilFRAC, CHDT, Pressure While Drilling, CoilFLATE, FAT).

Responsible for contractual issues, incident review and follow up, scheduling assistance, liason between BP-Houston and Schlumberger field operations and coordination of service requirements for generated designs.

Training:
Target Account Selling (TAS)
Enterprise Selling Process (ESP)

2001-2003, Operations Manager for Well Services (Dowell), California.

Responsibilities included both onshore and offshore operations as well as two remote bases. California operations covered work in the additional states of Nevada and Arizona.

Responsible for all aspects of the services provided in California including but not limited to financial, safety, service quality, personnel and regulatory requirements.

Personnel responsibilities: managed ~120 personnel made up of equipment operators, maintenance personnel, engineers, sales personnel and product line managers.

Financial responsibilites: managed two main facilites in California and two remote facilites. Total assest value (equipment, etc) was worth ~ 25 million and revenue generation of ~ 34 million per year.

Developed a Schlumberger (SLB) behavioral based safety program which dramatically improved safety performance. As testament to the success of the safety program, the Bakersfield District received the ChevronTexaco President's award for 1 year without an OSHA recordable. Bakersfield Operations was also awarded a Western Area award for the Best Achievement in the Management Systems Audit.

Regulatory requirements involved OHSA, CARB, SARA reporting, storm water isuses, air permitting issues, etc.

Training:
Environmental Risk Management
Environmental Waste Management
Stategies and Tactics for Successful Bidding by InnovoMark Marketing

1999 - 2001, Field Service Manager Dowell - Adelaide Australia

Responsibilities included stimulation, coiled tubing and cementing services - including remote logistics, personnel management, parts and chemical procurement, sales and engineering. Assumed management of cementing services near the end of assignment. Stimulation services covered both tight gas formations and coal bed methane.

All operations in Australia were performed out of remote bases. Personnel, equipment and material logistics were a major part of the operation. Logistics requirements included the coordination of personnel from all parts of Australia, the movement of equipment across the continent for various projects and the importation of materials from Europe, Asia and the US.

1997-1999, District Engineer – Rock Springs, Wyoming

Responsible for non-alliance stimulation design and candidate recognition using FracCADE in conjunction with Dwight's Perform (Nodal Analysis), Zoneaid, and ProCADE; provided support and review for identification and development of "best practices" by Dowell/Amoco Green River Basin Alliance.

Responsible for Quality Assurrance/Quality Control (QA/QC) on all critical treatments by:
* Reviewing and performing on-site fluid analysis (e.g, crosslinked and linear gel rheology, break tests, vortex closure and delay times).
* Provide additional on-site QA/QC by monitoring additive rates real time, mass balance calculations, etc.

Provided real-time DataFRAC and FracCADE analysis.

Provided field support for development of the FracCAT 3.2 software and ClearFRAC LC ( J526) fluid systems.

Functioned as district lab supervisor, computer administrator, district technical mentor (e.g., field engineers, supervisors, and equipment technicians), non-alliance sales engineer and back-up Field Service Manager for stimulation, coiled tubing and cementing.

Training:
QHSE for Managers
FracCAT Training, Version 3.2

1996-1997, Stimulation Engineer/Supervisor – Rock Springs, Wyoming

Stand alone service supervisor for stimulation treatments. Supervised various treatments ranging from low gel delayed systems, nitrified foam fracs, multi-stage treatments, matrix acidizing, gelled oil, CO2 foam fracturing, acid fracturing. Majority of stimulation treatments ranged from 5,000 psi to 10,000 psi surface treating pressures.

Maintained and operated fracturing equipment.

Training:
Attended Dowell Frac Intern school. The school specialized in real time analysis using FracCADE software, post treatment analysis using FracCADE software, fluids QA/QC, breaker technology, fracturing theory taught by Nolte, Elbel and Boney.

Co-authored "Frac Internship – Vol 1", internal manual that details the stimulation design process, datafrac and on site evaluation of stimulation treatments using the FracCADE software.

1995-1996, Coiled Tubing Engineer/Supervisor – Rock Springs, Wyoming

Functioned as cell leader managing day to day activity in the district as well as functioned as a stand alone service supervisor. Supervised coiled tubing operations ranging from hangoffs, foamed nitrogen clean outs, drill outs using various types and sizes of down hole motors and bits. Supervised E-line work including DSP, FoamMAT, perforating, casing collar locator for precise bridge plug placement.

Maintained and operated equipment.

Training:
Field Engineer Step-Coiled Tubing at the UTC training center in Great Britain, graduated Top of Class, graduated TOC.
Design Engineer Course-Coiled Tubing at the UTC training center in Great Britain, graduated TOC.

1994-1995, Cementing Engineer/Supervisor – Rock Springs, Wyoming

Stand alone service supervisor. Supervised cementing treatments ranging from two stage, remedial, gasblock and primary cementing.

Operated and maintained equipment.

Training:
Field Engineer Step-Cementing at the KTC training center in Kellyville, Ok, graduated TOC.

1992-1993, Little America Refinery – Casper, Wyoming

Lab assistant and general laborer. Responsible for laboratory testing of road oil. Loaded fuel oil in rail cars and prepared cars for shipping. Also performed general maintenence and cleaning of plant.

1991, Amoco Production Company – Salt Creek, Wyoming

Field Engineer Intern. Determined oxygen, carbon dioxide, and sulfide ion content of water samples from production wells. Performed candidate recognition of wells for re-perforation.

Computer Skills

Windows 2000 NT operating systems. Microsoft Office ( Word, Excel, Powerpoint, etc), SAP, FracCADE, CoilCADE, CemCADE, FracCAT, CoilCAT, PerFORM, ProCADE, ProMAT.

Awards

Chemical Engineering Department Honor Book, University of Wyoming – 1993
Annual Chapter Award for Scholastic Achievement, American Institute of Chemical Engineers, University of Wyoming, 1992
Phi Kappa Phi Honor Society, University of Wyoming, 1992
Golden Key National Honor Society, University of Wyoming, 1992
Tau Beta Pi National Engineering Honor Society, University of Wyoming, 1991

Interests

Coaching youth soccer, outdoor activities, weight training and running.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2851 to 2900 of 6411)

Go to Search Parameters...

Brief Description

I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.

seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units

Experienced mud engineer

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

A system engineer with more than ten years experience in process control and oil field development and implementation.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

Seven years experience.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Computer literate, Windows 98, MS Word, MS Excel, Powerpoint, Autocad 2D and 3D 2008 w/ color rendering

Water/wastewater Treatment, Hydraulic & Hydrologic Model

To pursue a challenging career and to put forth the best of my knowledge towards chemical process and engineering procurement industries.Also can do hardwork and be motivative towards the job undertaken

1 1/2 years as Jr Drilling Fluids Engineer, 15 years as water analysis, 5 years distillation.

Cable laying as per drawing

Engineering design of pipelines for natural gas transportation and production systems; evaluation of piping systems, development of piping material specifications, design of metering and regulation stations. Detailed design engineering using CAD.

Piping Engineer

Hydrogen Manufacturing, reformer, psa

Eight (8) years of very sound technical proficiency as a Piping Designer / CAD Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Offshore Platforms, Jackets & Process Equipments, Cross Country Pipelines including pumping stations & Water treatment Plants & Environmental Projects

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

Directional Driller

Instrumentation Graduate with hands on exposure in PLC programming and commisioning of PLC based Systems espescially,GE Fanuc,AllenBradelly,Beckener & Rainer (B&R).Hands on experience in Yokogawa DCS-CS 3000,System Engineering.

Stimulation Engieer

basic operation on CNC, Troubleshooting equipment Tools

Stratigraphy, sedimentology and depositional environments.

Process engineer with 3 years hands-on experience for Reliance Industries Limited India.

I have passed Diploma in Electrical and Electronics Engineering. Totally I have 12 years Experience in oil and Gas company and others.

Having three years of experience in the field of process engineering, B.E, Chemical

I am a Electrical supervisor in voltas company Abudhabi (UAE), in my concern it Shiek khalifa medical city for Electrical supervisor since past 2 years,and since before to still 9 years experience i had,7 years in india expererience and 2 years gulf experiece, i need Australia Goverment Job

PCS 7, TDC, C++, SQL,ORACLE 9i, WinCC,HMI

Responsible for actively involvement in the pre-commissioning and commissioning of the worlds largest natural gas plant

As Instrumentation Inspector/supervisor fully involved in construction,precommissioning,commissioning,start-up activities

Extremely motivated qualified geologist relishing new and dynamic challenges with a leadership role if required in a team or independently to achieve personal and company targets. Broad overseas experiences having worked in SE Asia and Europe and well-developed communication skills.

Master Technician (Mechanical)

Corrosion, Lab, Chemist, Oil & Gas

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

First Prev 51 52 53 54 55 56 57 [ 58 ] 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out