Resume - Senior Control Systems Engineer (PLC/SCADA), technically responsible for all sof...

Misco Jobs

Resume #61666

CONTACT INFORMATION:
View contact information...

Profile Over 20 years experience in control systems working in a variety of different industries. Both on an individual basis, part of a team and currently managing a team of system engineers. Experience with full project life-cycle, including current working practices and procedures.

Work History

2007 to Present Pickering Control Systems Ltd.
I recently setup my own company from which I am continuing to provide services to BNFL at Sellafield as a Senior Control Systems Engineer.

2003 to 2007 Brooksons Engineering Ltd. – Senior Control Systems Engineer
I am currently involved in the upgrade from S5 115U to S7-416 on two of our systems. This also includes the introduction of a Profibus DP network to communicate with MP370 HMI panels, Control Technique Servo Drives, remote I/O stations, Bar-code Reader and a PC that is used to capture X-Ray data. Communications to the PC is achieved via the use of a Hilscher Card and Kepware OPC server.

1996 to 2003 Motherwell Information Systems Ltd – Senior Control Systems Engineer
Whilst working for MIS Ltd my time was spent on site at BNFL Sellafield as part of the control system support group for the Sellafield Mox Plant (SMP). The control system comprises of 48 Siemens S155U PLC's connected to a FactoryLink/Oracle application via H1 Ethernet. Initially this was in the role of a system engineer supporting the Siemens's PLC's and implementing modifications in line with BNFL software change control procedures.
I was nominated as a System Manager responsible for a team of PLC/SCADA engineers and was technically responsible for authorising all modifications that were going to be implemented on the control system. To allow me to fulfill my role I am also nominated as Design Authority, Design Review Panel Leader and Functional Safety Assessor.

BNFL had also aligned its procedures to IEC 61508 which have a high emphasis on validation, verification, impact analysis, design review and safety functions. This increased my responsibilities to include all of the software, hardware, documentation and safety aspects of the control system.

1984 to 1996 P & I Design Ltd – Systems Engineer
P & I Design are a company involved in all aspects of instrumentation and process control systems, in the main for the Fine Chemical Industry, from the conceptual design stage right through to final commissioning. During my time with them I gained experience with a number of PLC's, but the majority has been with Siemen's PLC's. The company also had projects in other industries that I was involved in the main ones were: -

Inco Alloys Limited at Hereford - The project was to control the movement of an automatic Charge Machine, which picked up billets from a conveyor and placed them in a furnace in a defined pattern. The control system comprised of two Siemens S135U's, one on the Charge Machine, and one in a land based panel. Communications between the two was initially by radio but was later modified to microwave.

I was also involved with was the commissioning of the Lancelot Gas Field for Philips Petroleum at their Bacton Gas Terminal in Norfolk.

1980 to 1984 Parkfield Foundries - Apprenticeship
As part of my apprenticeship as an electrician, my first year was spent at an EITB Training Board where I learned basic engineering and electrical skills. The company is involved in the manufacture of iron castings, and I spent the remainder of my apprenticeship in the maintenance/breakdown of the Blast Furnace and associated equipment.

Skills Managing Safely in the Nuclear Industry course (IOSH)
Film Badge Holder for Monitored Worker Status
Basic Check Security Clearance
Clean Driving licence

Programmable Logic Controllers.
Texas 5Ti
Mitsubishi - A3,A2,A1 & series
Siemens – 155U, 135U, 115U & 100U, S7-416 & ET200S
Sattcontrol - 31-50,15 & 05
GEC Gem 80
Moore Products APACS system.

SCADA Packages
Mitsubishi - MX
TCS Tactician
AFE
Wizcon
Sattcontrol - SS300 & Sattgraph 1200
Telemechanique - Monitor 77
FactoryLink

Electronic Controllers.
TCS 6382
Moores 352

Education

1987 to 1989 Teesside University:
HNC Industrial Measurement & Control.

1986 to 1987 Longlands College of Further Education:
Electrical Engineering to Instrumentation Bridging Course.

1980 to 1983 Stockton & Billingham Technical College
ONC Electrical Engineering.

1975 to 1980 St. Patricks Comprehensive School, Thornaby.
GCE - Mathematics (4th year), Mathematics Syllabus B (5th year), English Language.
CSE - History, Geography, RE, Chemistry, Technical Drawing, Physics.

Interests General Fitness, Yoga

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 6411)

Go to Search Parameters...

Brief Description

Preparing FEED deliverables: Process Flow diagrams, P & IDs, heat & material balance table, process equipment data sheets Generation: heat exchangers, pumps, air fin fans, instrument data sheets, Control valve Sizing calculation,

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

All aspects of seismic data processing - signal processing, velocity modeling, migration

Sr. Production Geologist / Team Leader, New Oil

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

DCS, PLC, CALIBRATION, PRE-COMMISSIONING, SAT, FAT, LOOP-CHECKING

Drives/ Industrial electronics experience

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, Shutdown Coordinator with over 16 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Corrosion Engineering consultant

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinery production supervisor, oil terminal incharege etc. I worked on various International companies.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

31 years experience as Drilling/Workover Superintendent, Drilling Supervisor and Snr Drilling Engineer. B Sc ME. Horizontal, directional, high pressure, high H2S, onshore and offshore (platform and jackup)wells. Worked in Russia, Kenya, Greece, Pakistan, Libya and Algeria.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

drilling Engineer or drilling manager

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

Twenty-two years experience in production, reservoir and evaluation engineering of both major and independent oil companies. Areas of experience include Rocky Mountain, Mid-continent, West Texas, Gulf Coast, Argentina, and Venezuela.

Managed and implemented product, equipment, and process design/modifications in manufacturing and engineering including new product introductions.

I am a Mechanical Engineer with extensive experience in project management, terminal facilities, pipeline design, construction, operations, maintenance and onshore/offshore equipment specifications.

OBJECTIVE A Production engineer/Technologist with 20 year’s experience in the oil industry in Nigeria and the Netherlands.

Sole Proprietor of Bass Energy Company, a consulting firm specializing in drilling, operations and producing property acquisitions. Available for domestic and international assignments.

Summary Job Description: Senior Petroleum/Production/Reservoir Engineer specializing in: Field / Well Performance and Analysis Production Monitoring and Enhancement Cost Reduction and Optimization Team Management

20 years in Civil Finishing works / Insulation as Per CINI /Waterproofing/Anticorrosive Treatment/Painting as per ERS.

17 Years experience as a well log analyst. Contract handling, work over planning, production logging interpretation, management services, asset management ect.

Dear Employers, Through my resume you could evaluate my qualifications and experience in the field of ELECTRICAL & ELECTRONIC ENGINEERING – installation, maintenance and repair of different types of equipment.

I am a mechanical engineer. At Present days, I am working at PT. EXSPAN NUSANTARA as Production and Facility Engineer. My main responsibilities are handling crude oil production and optimization and designing and optimizing facilities.

25+ years experience - Gulf of Mexico, California, Alaska, and International. Fast working, self-starting, and dependable. Team player or individual contributor. Computer experience includes Landmark SeisWorks, Z-Map+, StratWorks, EarthCube, Geosoft "Montaj", and Stratimagic.

I have been working in the Petrochemical and Refining area since 1982 up to date from the level of control & optimization engineering up to Consultant level going through Management and Advisor positions. Open for opportunities overseas. Available September 2004 for new challenges.

Although its cyclical nature has separated me from the oil and gas industry for several years, the new amenable political climate has restored my excitement at the prospect of applying my expertise to new and challenging projects and I believe that my education and experience aptly prepares me.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out