Resume - Highly Experienced Crane and Lifting Engineer

Misco Jobs

Resume #62390

CONTACT INFORMATION:
View contact information...

Crane & Lifting Specialist/Technical Consultant

Date of Birth: 24th September 1967

Marital Status: Married

Qualifications:

Rochville University - Associate Degree in Mechanical Engineering,

National Vocational Qualification (NVQ) D32/33 Assessor & Level 3 in Engineering Maintenance,

'O' Level pass in Metalwork,

C.S.E. pass ('O' Grade Level Passes) in English, Arithmetic and Geography,

Scotvec Certificate in Agricultural/Industrial Engineering,

10 Year Passport Expires 4th April 2016,

Full UK Driving Licence & International Drivers Permit.

Industry Qualifications, Courses & Training:

OPITO / RGIT & TSTC Offshore Emergency & Survival Training (Aberdeen & Malaysia),

OPITO - Vantage Card, Basic First Aid,

Multifabs - Air Pocket Dry Trainer User, SCOTA – Offshore Crane Inspection,

SCOTA - Wire Rope Examiners, Banksman and Slingers Course,

In-situ machining - Line boring etc, Laser Alignment and Flatness Measurement,

Detroit Diesel – V71 Engine Familiarisation, Tune Up and Troubleshooting,

LOLER Lifting Gear Examiners, Sparrows Offshore Crane Operator Stage II,

Rothe Erde Slew Bearing Monitoring, Sky Scape Self Rescue,

Luffkin Gears Maintenance, Bolt Tension and Torque Course,

OCE LOLER & PUWER Awareness Training, OCE LEEA Awareness Course,

M.P.I. (N.D.T.) inspection of welds, castings etc,

Converse in the use of: Microsoft Project, Excel, Office, Word, PowerPoint & Lotus Systems.

H2s Certificate - Expires 2nd November 2009

Qualifications, Education & Training
Work Experience and Achievements

September 2008 to Present
Velosi Certification Bureau
Senior Crane and Lifting Specialist

Inspections and Certification of all lifting equipment for Sarawak Shell in Malaysia
Conduct training as well on all types of lifting gear.

August 1st to September 2008

Patriot Mechanical Handling Pte, Singapore

Position Held: Offshore Crane Project Manager

Reporting To: Director

Duties:

To project manage the manufacture of new offshore Kingpost cranes being built for various clients.
To assist and give guidance to the technicians, on the building and outfitting of the cranes.
To ensure the clients were continually updated on the progress and to show them the equipment as and when required.
To liaise closely with the certifying authority e.g. ABS etc.
To ensure all drawings are approved and submitted to the fabricator on time and that the material is available.

September 2006 to July 2007

Petra Resources Sdn. Bhd., Miri, Sarawak, East Malaysia

Position Held: Offshore Crane Maintenance & Operations Manager (Shell)

Reporting To: PRSB Senior Manager & Shell Contract Holder

Duties:

To manage and execute the safe maintenance & operation of the crane contract with Shell at both Sarawak and Sabah offshore locations.
I am the "Focal point" responsible for the managing and executing of the contract, and also responsible for the managing safety and operation of the contract
I provide detailed annual plans for inspection and testing, which shall meet all statutory, HSE and technical requirements.
Schedule and execute all contract related activities in good time, while optimizing logistic and accommodation resources. Such activities include ad hoc/breakdown repair maintenance, onshore component repairs, and also other related services as may be directed by Shell.
Submit detailed plans, which are updated on a monthly basis to show actual vs. planned.
Provided technical advice on crane maintenance, equipment condition, changeout timescales and execute corrective action and provided all necessary spare parts and materials to meet work schedule.
Prepare and submit maintenance reports and spares/materials inventory.
Monitor Key Performance Indicators, and submit report to Shell on monthly basis.

October 2004 to September 2006

Handal Offshore Services Sdn. Bhd., Kemaman, Terengganu, Malaysia

Position Held: Crane & Lifting Specialist/Manager

Reporting To: General and Regional Managers.

Duties:

Employed to write and compile the Crane, Lifting Operations and Maintenance Philosophy for Petronas Carigali Sdn. Bhd., now called the Lifting Equipment Management System (LEMS).
This document consisted of and includes the maintenance and operation of all types of lifting equipment, e.g. offshore cranes, mobile cranes, lifeboat davits, loose lifting equipment etc. and the standards and procedures to be used.
Once the LEMS was completed and handed over to PCSB, I was then involved with the manufacture, assembly and FAT testing of 2 x new Seacrane R450-100 Cranes for Shell Sarawak, which were the first of this kind to be manufactured and installed anywhere in the world.
I installed, commissioned and tested both of these new cranes for Sarawak Shell at their F23 P-A and DP-A Platforms in Sarawak East Malaysia.
Just recently in April 2006 I installed the 3rd Seacrane R450-100 for Shell on the F6 Platform.
I was also heavily involved with the manufacture, assembly and FAT testing of 6 other new cranes for PCSB, Shell, GPS and EMEPMI.
I was also involved with the manufacture, assembly and testing of a Personnel Transfer Bridge for Talisman Malaysia South Angsi Field.
Other duties include all crane related projects/tasks for PCSB, EPMI, Talisman & Shell, also assisted with the project management for the construction, assembly and commissioning of our new range of offshore pedestal cranes for various clients.
I also provide technical support & assistance to our various clients to resolve their crane and lifting related issues.

October 2003 to October 2004

After returning from Brazil, I went back to my original position as Field Operations Supervisor/Technical Manager with Offshore Crane Engineering in Aberdeen, Scotland, until the company went into receivership and was sold.

July 2003 to October 2003

Offshore Crane do Brazil Limitda, Macae, Rio de Janeiro, Brazil (Subsidiary of OCE)

Position Held: Technical & Field Services Manager

Reporting To: General Manager

Duties:

To assist all field personnel with any problems they may encounter whilst offshore, and to ensure they get offshore without any difficulties.
To successfully operate and manage the contracts that was under my control for the oil and various drilling companies. To answer any technical queries that may arise on the platform cranes offshore and recommend repair procedures and the best way forward in which to carry these out.
Ensure that training and development of local personnel was carried out in a business like and professional manner.
To ensure the customers enquiries and requirements are interpreted correctly and received prompt attention.
Draft and issue proposals for projects including, budgets for the specific crane and lifting related tasks.
Write, get approved and issue procedures for different tasks relating to cranes and lifting operations, both on and offshore.
Be focal point for selling the companies products and services to the clients.
Be a focal point for the NVQ Competency Assessment of all Field Support Personnel.
Convene departmental operations meetings on a regular basis, but as a minimum once a month.
Ensuring all practicable steps is taken to comply with the Health & Safety Act 1974, current Health & Safety legislation and regulations and the company Safety Polices.
Maximise profitability of contacts under my control by good management practices.
Arrange mobilisations of Field Personnel to the client-designated locations, and ensuring all equipment necessary for the project is available.
Re-writing Planned Preventative Maintenance Routines for various clients, and recommending improvements to their systems.
Drafting out Project Plans for larger projects and discuss them with the client prior to mobilisation of personnel to the respective location.

June 2002 to July 2003

Petronas Carigali Sdn. Bhd., Kemaman Supply Base, Terengganu, Malaysia.

Position Held: Offshore Crane Specialist/Technical Consultant

Reporting To: PCSB Asset Management & Asset Maintenance Engineers

I was contracted to Petronas through OCE's agent "Romstar" in Kuala Lumpur.

Duties:

Employed to manage and co-ordinate all crane maintenance in PCSB/PMO operations performed by the crane contractor (Handal Offshore Services).
To ensure all work on all 33 Petronas cranes, that was carried out by the crane contractor was done on schedule and as per work scope, and was also carried out to API 2C and 2D Standards.
To create and continuously update a crane database, which contains all equipment that is fitted to each crane.
To reschedule the existing PPM's and ensure the new schedule is carried out as planned.
To ensure when a crane is taken ashore for a 100% overhaul, that all parts are available and to also ensure the work is carried out as per scope of work.
Oversee the services of the crane contractor during on and offshore work.
Report to the Asset Managers and keep them up to date on the progress.
Provide and carry out a detailed annual inspection on each crane as well as ensuring all annual load tests were carried out as and when required.
On the inspections, all critical issues found, were reported to the Asset Management on my return onshore and to all Platform Management prior to departure from the platform.
From the inspections a scope of work would be drafted for the contractor to quote and plan the repair work required for that specific crane.
Furnish monthly reports to all 4 Assets on the work carried out in the previous month.
Provide technical advice on crane design, operation and maintenance and recommend/implement improvements.
Develop repair procedures for all crane components.
Carry out a detailed stock check of all crane spares kept at Petronas Warehouse, review all spares and advise Asset Management on the spare parts to be kept offshore and at their stores onshore.
Provide recommendations on the timescale for each component changeout.
Develop Butt Lists for repairs required and ensure that these lists are kept updated.
To ensure all contractors equipment is shipped offshore on time for the work to commence.
Analyse the downtime of each of the 33 cranes, and report to Asset.
Ensure JSA's (Job Safety Analysis) are carried out prior to any job starting offshore.
Develop standard reporting formats for all relative crane repairs and issues.

1997 to 2002

Offshore Crane Engineering Limited, Dyce, Aberdeen

Position Held: Field Operations Supervisor/Technical Manager

Reporting To: Managing Director and Engineering Manager

Duties:

All relevant crane repair's both on and offshore including but not limited to e.g. troubleshooting hydraulics, winch unit, slew bearing and boom changeouts, together with crane operation duties for various clients in various different locations in the North Sea and various different countries worldwide.
Carrying out day to day maintenance and annual inspections on various Platform, Semi Submersible, and FPSO's, Ships and Jack up Rig cranes including but not limited to the following makes, Liebherr, Favco, National, Stothert & Pitt, FMC and Seatrax to API Directives 2C and 2D, and British Standards.
The standards used depended on the clients and Certifying Authorities requirements.
This involved regular dismantling, inspection, and reassembling of a various range of winch drives, crane structures and rigging.
I was also in charge of crane installation, commissioning as well as crane removal.

My position involved supervising/managing a variety of crane projects in the UK and worldwide.

As the owners of Bucyrus Erie Marine Cranes (BMC) a lot of the work overseas was done on these cranes as part of our service.

To supervise all company personnel while working on specific projects on site, offshore or overseas, including assignment of duties to personnel.
Liaison with Client Staff and Management, Project Engineers and Job Officers to ensure work instructions are fully understood.
Complying with all QA/HSE and environmental regulations and company procedures.

Other duties include planning of offshore contracts, maintenance plans, personnel assignments to specific tasks, writing and checking of procedures required, arranging tool-box talks and liaising with engineers and job officers managing the contracts onshore.

I also had to, as part of my job provide technical support & assistance to our various oil company clients to resolve any of their crane and lifting related issues.

Maintaining regular contact with onshore management whilst offshore and liaising with corresponding client platform personnel. Maintaining all site records of work, including observation of personnel competence as part of my duties as the companies NVQ Assessor; health, safety and environmental performance, and ensuring of compliance with agreed client contractual requirements.

Compile all records upon job completion, assisting with documentation package compilation and contributing in any necessary post-contract enquiries and corrective actions.
This also includes attending meetings with the clients to de-brief them on the project.

Also include in my duties was the writing of and implementation of Preventative Maintenance Routines for various clients and crane types.

1996 to 1997

Coflexip Stena Offshore Limited, Westhill, Aberdeen

Position Held: Mechanic/Hydraulic Supervisor for Gas & Hydraulics

Reporting to: Owner & Manager of Gas & Hydraulics

Duties:

Complete assembly of hydraulic winches and power packs with open and closed loop circuits with both electric and diesel prime movers.
Once these packs had been built, the systems were pressure and function tested to ensure correct operation before being allowed to go offshore.
Duties also included strip-down, inspection and repair of hydraulic power packs, pumps and motors of various different makes i.e. Denison, Rexroth, Sauer Sunstrand, Commercial etc.
Repairs were also carried to various types of cranes onboard Coflexip Stena's fleet of dive support ships.

1996 to 1996

Sparrows Offshore Services Limited, Bridge of Don, Aberdeen

Position Held: Lead Crane Technician

Reporting To: Foreman and Offshore Field Supervisor

Workshop Duties:

Carry out mechanical repairs to various crane components and hydraulic trouble-shooting.
Repair work on engines, hydraulic pumps, motors and gearboxes, through to full crane re-assembly, trial running, commissioning and load testing.

Offshore Duties: (Adhoc)

Carry out general crane repairs and refurbishment work offshore on a variety of different crane types, i.e. Favco, National, Stothertt & Pitt and FMC etc.
Preventative Maintenance work was also carried out to API Directives 2C and 2D and or British Standards e.g. rope changeouts, servicing etc.
Work included removing, dismantling, stripping down, overhauling, reassembling, installing and commissioning various crane components and assemblies. These included engines, booms and A-frames, slewbearings and winch units; and undertaking changeout of major components necessitating crane jack-up on-site.
Hydraulic troubleshooting was also carried out on various different types of cranes and systems.
Engine types varied from Caterpillar, Detroit Diesel, and Cummings.

1989 to 1996

Offshore Crane Engineering Limited, Dyce, Aberdeen

Position Held: Lead Crane Mechanic

Reporting To: Operations Director and Offshore Field Supervisor

Workshop Duties:

Carry out mechanical repairs to various crane components as well as hydraulic troubleshooting.
Repair work on engines, pumps, motors and gearboxes, through to full crane strip down, re-assembly, and trial running, commissioning and load testing.

Offshore Duties: (Adhoc)

Carry out general crane repairs and refurbishment work offshore to a variety of different cranes including but not limited to Liebherr, Favco, Bucyrus Erie, FMC and Seatrax etc.
Preventative Maintenance work was also carried out to API Directives 2C and 2D and or British Standards e.g. rope and component changeouts, servicing etc.
Work included removing, dismantling, stripping down, overhauling, reassembling, installing and commissioning various crane components and assemblies.
These included engines, booms, A-frames, slewbearings, winch units; and undertaking changeout of major components necessitating crane jack-up on-site.
Hydraulic troubleshooting was also carried out on various different types of cranes and systems i.e. Sundstrand, Denison, Rexroth etc.
Engine types varied from Caterpillar, Detroit Diesel, and Cummings.

Note:
For the majority of my working life I have worked unsupervised and mostly in a supervisory capacity.

Interests & Hobbies:

Playing and watching football and golf, going to the cinema, good food, watching motorcar and motor bike racing, DIY, riding motor bikes etc.

Experience with the following Crane Types:

Bucyrus Erie, Stothertt & Pitt, Priestman,
Kenz, Favco, Manitex,
National, Liebherr, Seaking,
Unit Mariner, FMC Linkbelt, NCK,
Seatrax, Skagit, Manitowoc,
MAN Wolffkran, Hydralift, Norlift,
Hydramaskin, American Aero, Seacrane,
Clark Chapman, Marathon Le Tourneau, American Hoist,
Gallion, Baker Marine, Fukushima,
Nautilus, AM Clyde, Heila,
Dongwoo, Atlas, Draco,
Aker Nylands, Clyde, Effer.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 7011)

Go to Search Parameters...

Brief Description

Operations engineer for oil and gas, shallow wells: drilling and workovers, projects evaluations.

Summary21years practical working experience in engineering design including in offshore and onshore and oil project.I worked at refrigerator, trawler,tanker,scientific and container ships.My professional experience has given me an in-depth knowledge of the El.Engineering in Marine/Petroleum branch

Oil Gas and Chemicals

Pipe Stress Analysis planning and detail studies, static analysis of piping systems, including: refractory pipe, jacketed pipe, High / Medium Temperature and Cryogenic piping connected to pumps, compressors, turbines, fire heaters, storage tanks & pressure vessels; underground pipeline.

Highly Experienced Crane and Lifting Engineer

Controls Engineer

Licensed Professional Engineer, performance oriented, with 25 years of extensive broad-based experience in multidisciplinary projects in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering, Procurement and Construction

Over 35 years of diversified experience as an instrumentation and control system /electrical power distribution engineer for petrochemical plants, refineries, synthetic rubber, carbon black plant and oil and gas fired power plants. Provided engineering expertise in the areas of project admin.

Free! I have over 35 years experience as an Instrument and Electrical Engineer in the Refining and Petrochemical Industries. I graduated in 1973 from the University of Louisville with a Master of Engineering with Specialization in Chemical Engineering degree.

Senior Cost Estimator with 20 years of progressive hands-on experience in petrochemical, oil and gas, and consulting engineering industries. Experienced in IPM Aspen Tech; Q-Estimate, Aspen Tech Kbase - ICARUS-2000, Exxon Estimating System, LULO Software - Venezuelan Commercial Cost Software, and SI

I am communicative, hard working. I easily integrate in new working and social environments as I have excellent communication skills and I am very open minded and flexible, I am responsible, ambitious and a real team player. I totally agreed and follow the HSE policy.

20 years experience with over 15 years of experience in design, engineering, and project management in the petroleum, and petrochemical industry. Successfully worked in different roles in oil industry in his 20 yrs career – engineering, project, and operation.

Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager

Principal Structural/Project Engineer with 16 years exp. in Oil & Gas Structures and Heavy Civils/Bridges. Worked in America, UK/Europe and Africa. Very diligent and precise but practical in appraoch. With a MSc in Engineering and PhD in Business providing excellent management and leadership skills.

Well site geologist or geologist operation

I have 20+ years of experience finding hydrocarbons in basins across the world; mainly through acquiring, processing and interpreting 2D and 3D seismic data and working together with geologists, engineers and landmen to put together economic drillable leads.

I wish to apply for the Full time post of Geologist, presently I am working as a Assistant Professor in Geology department of Poona College of Art’s, Science and Commerce, Camp, Pune ,Maharashtra affiliated to University of Pune, past 21 years at graduate level. During teaching Structu

I am 29 years experienced in HSE arena. It is Included in Oil and Gas, Petrochemical, Lamp Manufacturing and Gas Turbine Repair Shops.

Mechanical engineer with experience of the complete construction process of petrochemical plant from basic design to testing, commissioning, start up and final hand over. Having also a detailed knowledge and sound experience in the maintenance of petrochemical plants.

20 years experience in major integrated national oil company of India. Experience in production operations, process development, enhnaced oil recovery projects and research work related various operations of the company.

Instrument and Controls Engineer

Over 18 years total experience in design engineering, process systems, field engineering, project engineering. This includes design and specifications, chemical process analysis for Process Technology units, strong skilled in water treatment process. Proficient in the use of: AutoCAD, Microsoft Wind

Metallurgical Engineer, Metallurgsit

Economic and Reserve analysis, acquisitions, reservoir engineering in California heavy oil and Appalachian Basin natural gas

Process Engineer with 20 years of experience in EPC and operating companies

PROJECT ELECTRICAL ENGINEER

Structural Engineer • PROFILE • Demonstrated design experience in structural steel and concrete - Energy/Power and Oil/Gas industry. • Diverse heavy construction experience in buildings, pre-casting, bridges, highways, dams, estimation and bidding for construction projects. EDUCATION MS. Structur

Sr. Project Engineer/ Project Manager

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

More than 10 years of experience coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore/onshore and subsea industries.

Petroleum engineer with over 23 years of oil and gas industry experience, including over 14 years of drilling fluids engineering in Romania, Middle East (offshore and onshore), Canada offshore (Terra Nova project) and onshore (Western Canada), Alaska, India and 9 years with Romanian drilling

Experienced oil & gas geoscientist in exploration, production and business development

I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.

Free Lancer Nace Certified Coating Inspector, SSPC Certified Protective Coating Inspector, AWS Certified Welding Inspector, ACA Certified Corrosion Technologist 24 years of exp. in Coating field. Third party experience in Petro Chemical Industry for last 12 years

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Condition Monitoring, Reliability Engineer

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out