Resume - DCS, PLC, SCADA and training.

Misco Jobs

Resume #62452

CONTACT INFORMATION:
View contact information...

I am a Certified Engineering Technologist in Industrial Electronics, and a Journeyman Instrument Technician with more than 10 years field experience and 6 years instructing at SAIT.

I have been working overseas with NEXEN Inc. as an Instrument/SCADA Training Advisor since May 9th 2004. My current duties include developing courses and training the workforce for the Mukalla block oil production facility in Yemen.
I have several years experience in Gas plants and Pulp mills, excellent communication skills and an extensive electronic background including Bailey (NET90, INFI90), DeltaV (4-5-6), Datek RTU, ROC312, SCADAPack's (100, Light, and 32), GE Fanuc (90-30 and 90-70), AB PLC (PLC5 and SLC500). I am also familiar with Kiddie, Cerberus and Notifier fire panels.

I am experienced in:
Specifying Rosemount measurement instrumentation
Fisher and Valtec control valves repair, sizing and selection
Metering instruments including Gas and liquid
I can calibrate with hydraulic, pneumatic, HART and software equipment.

I have excellent skills with Microsoft office tools including OPC applications.

I am experienced with Power and Recovery boiler instrumentation, Bleach Craft Pulp mills, Sour Gas Plants and Oil production and distribution.

I have been keeping myself current in new technologies and changing conditions to increase my adaptability and my ability to manage change.
My years of teaching at SAIT and Nexen have sharpened my communication skills and enabled me to write clearly, and succinctly, in a variety of settings and styles.

My technical and operational knowledge, skills and experience will ensure that my performance will be at a high level of accomplishment.

EDUCATION

November 1991
Southern Alberta Institute of Technology
Journeyman Instrument Mechanic
Certification and Interprovincial Red Seal
May 1987
Southern Alberta Institute of Technology
Industrial Electronics Technology,
CET, Certified by A.S.E.T.

WORK EXPERIENCE

NEXEN Inc.
From May 9 2004 to Present
(Overseas) Yemen Training Dept
NEXEN Inc.
801-7th Avenue S.W.
Calgary, Alberta, Canada
T2P 3P7
Instrumentation Training Specialist (450 Oil wells)
Develop and train for PLC training courses for AB PLC5, AB SLC500, GE FANUC 90-30 and GE FANUC 90-70.
Develop and train for SCADA technicians for SCADAPack Lite, Plus and 32.
Develop and train for Analog and Digital electronic circuits.
Develop and train for Fisher Rotary and Stem valve actuators, Fisher I/P and Fisher Actuators.
Develop and train for all analytical transmitters.
Develop and train for Cerberus and Kiddie fire panels.

Southern Alberta Institute of Technology
From December 1997 to May 7 2004
Energy Department
1301-16th Avenue NW
Calgary, Alberta
T2M-0L4
Instrumentation Engineering Instructor (IIT Industrial Instrumentation Technology, IMP Instrument Mechanic Program)
Develop new DCS/SCADA Lab (ABB NET90, DeltaV version 5&6, ROC, Wireless SCADAPack32 and Freewave Radios).
Develop and instruct new courses for IIT and IMP for the Analyzers, Measurement and DCS Lab (ABB Bailey, DeltaV and ROC RTU).
4th year IMP, Advanced Digital and PLC lab Instructor using RSLogix 500 and Bailey NET90.
3rd year IMP Analyzer Instructor featuring pH, conductivity, CO/CO2, IR, UV, NO/NOX and O2 analyzers.
2nd year IMP measurement lab Instructor featuring pneumatic Foxboro 13A, Fisher LevelTrol, Rosemount 3051, 3144, and Halliburton turbine meter featuring MCII totalizer, and Daniel Orifice plate changer and finally the Rosemount 8211C Magnetic flow meter.
I also developed and taught the DCSI, DCSII and DCSII for the evening Continuing Education courses.

Crestbrook Forest Industries Ltd
September 1992 to October 1997
Pulp Mill Division
P.O. Box 4600
Cranbrook, B.C.
V1C 4J7
Instrument Technician (40,000 I/O)
New Recovery Boiler, New Kiln, New Color Clarifier and DCS upgrade in a 20 year old Plant.
DCS and Plant Maintenance. Bailey INFI90, GE & AB PLC, GPI and Rosemount smart TX.
Installation, commissioning, calibration and testing of instrument control and indication.
Electronic and pneumatic equipment repair.

Mobil Oil
December 1990 to September 1992
Whitecourt Area Office.
Whitecourt, Alberta
P.O. Box 209 T7S 1N8
(604) 774-3151
Instrument Technician (3,000 I/O)
New DCS, SCADA/RTU and PLC in a 30-year-old Plant
RTU, DCS and Plant Maintenance (Bailey Net 90 and Datek RTU/SCADA). Fisher and Valtec.
Responsible for organising work force, parts and prioritizing work for shutdown maintenance.
Scheduling preventive maintenance.

Opsco Industries Ltd.
September 1989 to November 1990
2601 Centre Avenue East
Calgary, Alberta
(403) 272-2206
Instrument Shop Supervisor
Quality control of rental equipment and work orders.
Supervising daily instrument shop operations.
Responsible for all inventories purchasing and stock control.

Opsco Industries Ltd.
August 1987 to September 1989
2601-Centre Avenue East
Calgary, Alberta
(403) 272-2206
Electronic Technologist
Design and construction of Opsco Compulog, electronic dead weight, seven digit frequency counter/totalizer, and electronic level controller. Maintenance and repair of acoustic well sounding device and other electronic instruments.

INTERESTS: Family, Weight Lifting, Movies, Skiing and Boating.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 6742)

Go to Search Parameters...

Brief Description

Experienced (17 yrs) Project Manager in oil & gas

Control System’s Designer / Engineer, Construction/Commissioning Experience in China of Field Instruments, DCS Systems, ESD, PLC. Intergraph INTools, PDS, Oracle, Access and Autocad

Over 14 years in all aspects of geophysical applications, including 2-D and 3-D seismic data processing and QC, data acquisition QC, survey design, seismic interpretation and mapping. Highly experienced in technical supervision and quality control of seismic projects worldwide.

Ûtructural design and construction site supervision in the oil/gas fields

Oil & gas instrumentation installation supervision, commissioning and maintenance of control systems.

Physical metallurgist and Welding engineer Steel design, Corrosion etc Willing to travel extensively Is looking for exciting employment, international carrier (e.g. Petroleum & Mining)

PhD-educated geophysicist with 12 years of experience in petroleum exploration industry and research institutions. Seismic interpretation of 2/3D for oil/gas targets in Australasia. Strong background in a variety of seismic data analysis, including AVO, LFP and depth conversions.

Control & instrumentation for oil &gas plants/pipelines, FEED &detailed engineering, HAZOP, TBE, vendor documents review, cost estimation, man-hours evaluation.

15 years of professional experience in Business Development, Technical Marketing and Consulting Services in the Engineering Software Industry.

Please see Resume Body.

Working 18 years with multinational companies of Power Sector (includes related Water & Waste Water treatment and Oil & Gas systems). Now working as Site Representative (Manager)and reporting directly to Project Director. See the CV

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I¡¦m seeking a challenging position as a Drilling &/or Completion Engineer.

My areas of specialty include Turbo Machinery Dynamic Analysis, Predictive Maintenance and Reliability Engineering in Rotating Equipment.

Project Engineer/Refinery Reliability Engineer/Turnaround Coordinator Over 13 year career of both domestic and international refinery and engineering experience spanning major areas of the oil and petrochemical industry.

I am Bsc of metallurgical engineering and Msc of corrosion engineering and i'm expert at procurement such as purchasing, expediting and inspection on oil, gas & pertochemical industries

Process design, PFDs, P&IDs, Data sheets, Heat mass balances

Preparing specification for new project Supervisory for installation and startup Up to date of drawing (p&id,hookup,connection list,etc)

Electrical Design, Detail Engg in Oil & Gas. Also Expert in Powersystem Study(LF, SC, Relay Co, Motor Starting, Transiant Stability,etc). Abroad Exp. includes USA, QATAR.

Mainly worked in the electrical system applications and well versed in development of protection schemes, preparation of relaying & metering drawings, including scope of work and technical specification for power projects/contracts.

Preparing design criteria, datasheet, specification, mechanical calculation and prepare calculation and shop drawing for storage tank and pressure vessels,

Peep/OFM expert, data manager, programmer, reservoir engineer

Boat technision, aircraft technision and designer

INSTRUMENT ENGINEER, WORKED ON FIRE & GAS, ESD SYSTEM, STEAM TURBINE, STARTUP BLOWER. GOOD KNOWLEDGE OF PLC, DCS & SCADA.

Highly motivated and experienced MAINTENANCE SUPERVISOR.

ndt, api, aws inspections supervisor 35 years exp. chemical palnt, pipeline and oil field, currently 17 years at chemical plant supervise mech. Intgrity and PSM programs, plant site maintenance supervisor, ground, rr track, ditches, building, etc

As a technological process engineer at The Main Platform I am alternatively dealing with two kinds of jobs: in the field and in the control room.

17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas industries (Offshore and Onshore facilities). Proficient use of design software include AutoCAD 2008i, PDMS to model and generate 2D drafting and also MDS design software to design and model pipe support.

Senior Geologist

Mechanical engineer with 20 years exp.

More than 15 years extensive experience in Instrumentation and Controls in the Oil and Gas Industry (on/offshore) in International locations. With various responsibilities on design & application, project management support, construction, commissioning, inspections and maintenance which includes l

Piping Design Engineer and PDS Administrator

T3 National Diploma Electrical Engineering (Instrumentation), Instrument / Analyser enginering, design ,project implementation & project management. Process control , Safegaurding design, DCS, Optimisation| , Oil Movements & product quality, LPG& Marine, Terminal & LPG design.

I am a chemical engineer with 12 yrs experience in petrochemical plant & operation.I beleive that I can do my best for my employer and you will be satisfied from my job and activity.you can try me.Im expert in chemical cleanning of pipes & instruments as in my resume.

DCS, PLC, SCADA and training.

12 years experience in oil and gas sector

13 years post qualification experience in FEED, detailed Engineering and Engineering Management for Chemicals/ Fertilizer, Petrochemicals(Ethylene, Poly Ethylene,Poly Propylene etc), Refinery, Oil and Gas industry (Onshore & Offshore, Upstream & Downstream) and detailed engineering in Pressure vesse

I am a Mechanical Engineer with 16 Years of experience as "Piping Engineer" in engineering of Offshore plants i.e Fixed platforms, FPSO, FPU and Onshore plants ex. Refineries, Petrochemicals, Polyester Plant etc. I am having vast experience of working with Leading International Clients.

Oil gas tankage [farm tank-speherical - double wall] fabrication/construction management. QAQC mangement - construction safety management

Associate myself with an organization, which has potential for both organizational and individual development and scope for learning and to enhance my skills team output and competent professional.

A Marine Maintenance engineer with International exposure and managerial experience. Last post as Technical superintendent at Tokyo, shipping related.

Experience in O&M of gas turbine &steam turbine

15 years experience of planning, design and implementation of Networks, Telecommunications, Systems implementation and integration, with IT teams around world using my expertise and Multi-language skills: English, Russian, Portuguese, Spanish.

Engineering services to the community and the industries and future progression as a chemical engineer in all related fields such as designing oil and gas industries and mining

ESD logic design and analysis, Process Control design, analysis, and tuning, Honeywell system configurations and implementations, Triconex system configurations and implementations , Design Scope Writing, Conducting review meetings, acceptance tests, and commissioning

ME (Structural Engineering) From Regional Engineering College (NIT), Trichy, India,STAAD/Pro, Active member in AISC

Civil/Structure engineer with local/international experience, more than 13 years experience in detail engineering design and supervision of infrastructure projects (bridge, overpass, etc), industrial, residential and commercial projects.

Over twenty years experience spent in the oil and petrochemical industry. Experienced in all aspects of electrical commissioning operations and maintenance. With design reviews and Vendor site visits through to fats. with the ability to liase with other disciplines on gas turbine and diesel generato

MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION

Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.

BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out