Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #62584 next resume »»
CONTACT INFORMATION:
View contact information...

B-GAS /CSWIP LEVEL II PAINTING INSPECTOR RESUME

COATING/PAINTING/ INSULATION-INSPECTOR CARRIER SUMMARY:
About 15 years experience in the fields of inspection,Quality control,Engineering study and review, working to Power,Major oil and Gas industries.Out of which 8 years exclusive experience at Habsan-Abudhabi,Karazakanak-Kazakizthan,Sur-Muscat,Doha-Qatar,
Dammam-KSA.

B-GaS/CSWIP Certified Painting Inspector level-II
Certificate #19325
Expiry date:12 march 2010

Software used:MS office,MS Project
Codes&Standards used:SSPC,SIS 05 5900,ASTM,AWWA,ISO 9001:2000 and other international codes

Since June 2007 to Till Date working as EPC coating/painting/insulation Qc
Supervisor in Snamprogetti-Saipem- Mesaieed-Doha-Qatar.

Since Oct 2006 to April 2007 worked as EPC coating/painting Inspector in
Saudi Techint Int co., K.S.A / Saudi Aram co Approved SAP #70006901
SAUDI-ARAMCO APPROVED COATING INSPECTOR [NORTHEN AREA]

Since Feb 2006 to July 2006 Worked as painting/coating inspector in Peninsular Petro tec Engg.,Teyseer Group of companies(Qatar)
Client: Qatar Steel Company /Qatar Petroleum

Since July 2005 toDec 2005 Worked as painting/insulation Inspector in Consolidated Contracting company(Doha-Qatar)

Since July 2004 to April 2005 Worked as painting/insulation inspector in Consolidated Contractor Company Muscat
Client: Oman-India fertilizer (Omifco).,

Since Jan 2001 to April 2004 Worked as JV painting/insulation inspector in CCC/Saipem(Jv) kazakizthan
Client:KPO Bv.,

Since Oct 1999 to Oct 2000Worked as painting/insulation inspector in
Consolidated Contractor Company Abu-Dhabi
Client: Abu-Dhabi National oil co(ADNOC).,

Since Jun 1992 to July 1999 Worked as Inspector/Supervisor in
Sujay Engineering Co(Bangalore-India)

Project Handled:
Qatofin low line density polyethylene production unit,4,50,000 mt per yr
Consist of civil/mechanical/electrical-instrument activities.
Khursananiyah Up stream&Down stream 425 km pipe line project which covers
40„c,36„c,24„c,14„c cross country Pipe line
Water injection pipe line with internal/external fusion bond epoxy coating.
Contract No:TDR-013/02/2003-(46)Supply,fabrication,painting&installationo of
Reformed cooler by Pass line in DR Plant(Qatar steel company)
ContractNo:WO-TDR-013/02/2003-(44) Design,supply,Fabrication,painting,erection&commissioning Of new compressor house pipe lines for EF(Qatar steel company)
ContractNo:WO-TDR-013/02/2003-(57)Fabrication,Painting&Supplyof ladder stand(Q.S.C)
Fabrication,Painting&erection of structural steel members
(M/S Al-Balagh Trading contracting CO)
Fabrication,Painting&erection of Fire water pump house structural steel members
(M/S Simplex Concrete piles(India)ltd
Ethylene expansion project which covers structural steel, pipe, spool painting, under ground pipe Cold applied wrapping

Urea/Ammonia production plant which covers structural steel (zinc epoxy primer,micasiose iron Oxide intermitted, polyurethane finish)three coats painting, high temperature boiler external Zinc Aluminum painting, tank external/internal painting,
28,000 tons storage capacity go down concrete beams, wall epoxy painting, Ammonia export pumps, piping cold insulation
Crude condensate Export project which covers structural steel, piping/spools painting with
-18*C Surface tolerant epoxy paint,48 diameter Floating roof storage tank external painting/insulation, High solid glass flake paint tank internal lining, Below the frozen level Fire water GRP pipe line Insulation,24¡¨ coated export pipe line inspection.
On-shore Gas Development phase II project which includes structural steel painting, vessel internal Lining,sulphur unit pipe internal calumniation

CORE RESPONSIBILITIES:

Project Management

- Title, function, responsibilities and authorities
- Key contacts for co-ordination
- Scope of work, project contractual requirements such as milestones and completion schedule
- Design engineering, fabrication and construction sequence
- Review specification (including all amendments and pertinent appendices), applicable codes
And standards
- Conflicting requirements, project field change requests, technical deviations and engineering change notices
- Pre-job conference records or minutes of meetings
- Attend ad-hoc clarification meetings with client
- Review tender documents for paint supply subcontract
- Attend tender clarification meetings with paint vendors
- Review paint vendor priced & un-priced (technical) documents
- Perform audit at paint vendor facility to assess capabilities
- Submit assessment report & recommendations on potential paint vendors
Attend technical & commercial negotiation meetings with paint vendors
- Attend paint vendor finalization meeting
- Review paint vendor documents
- Project history or track record
- Project specific site technical representatives resume
- Key personnel - title, function, responsibilities and authorities
- Daily report or log
- Specific field tests & reports
- Laboratory test reports
- Review tender documents for blasting & painting subcontract
- Attend tender clarification meetings with subcontractors
- Review subcontractor priced & un-priced (technical) documents
- Perform audit at subcontractor facility to assess execution capabilities
- Submit assessment report & recommendations on potential subcontractor
- Attend technical & commercial negotiation meetings with subcontractor
- Attend subcontractor finalization meeting
- Review subcontractor documents
- Project history or track record
- Project organization chart
- Resume of key personnel
- Key personnel - title, function, responsibilities and authorities
- Manpower histogram
- List of plant, machinery, equipment, tools, inspection instruments & site office facility
- Procedures
- Inspection test plan
- Daily progress report
- Daily inspection report
- Review company procedures and inspection test plan
- Ensure effective utilization of subcontractor resources
- Monitor subcontractor performance
- Monitor project schedule planned VS actual
- Identify areas in critical path, cause and effect
- Establish, implement & monitor recovery plan
- Attend quality surveillance with client
- Conduct co-ordination meeting
- Conduct weekly meeting with subcontractor
- Review & verify subcontractor monthly valuation
- Advise contracts department on variation orders & claim
- Constant co-ordination with project management team

GENERAL OVERVIEW:

- Cause and effect of corrosion
- Protection, maintenance and prevention of corrosion
- Design and material selection
- Anti-corrosion protective coatings
- Surface preparation methods
- Mechanical surface preparation during pre-fabrication and onsite portable centrifugal blasting
- Open air blast cleaning
- Vacuum blast cleaning
- Hydro blast cleaning
- Wet blast cleaning
- Hand and power tool cleaning
- General uses of coatings / linings / wrappings
- Painting
- Galvanizing
- Thermal Sprayed Aluminum
- Passive Fire Protection
- High performance internal linings
- Tape wrapping
- Cement linings
- Self leveling compounds
- Anti-skid deck coatings
- Type of coatings commonly used and the major components of coatings
- General physical and chemical properties of the generic types of coatings and application process of coatings / linings
- Calibration of inspection and test instruments
- Using coatings inspection and test instruments
- Defects affecting performance of the applied coatings
- Causes for most common coating defects
- Inspection of defects on coated surface
- Acceptable and unacceptable defects
- Identification of defects and implementation of repair procedure
- Premature failure analysis of coatings
- Protective coating inspection standards for field and shop applications
- Internal spin blasting and spray painting methods
- Plural spray method
- Hot spray method
- Documentation

Enforcement and verification of work performed in accordance with specification, manufacturer recommendations and applicator coating procedure.

- Witness applicator qualification or trade test and paint system qualification
- Measure ambient conditions, surface temperature and air quality requirements
- Inspect location and suitability of access for areas of work
- Inspect type of blasting equipment and tools to be used
- Inspect type and size of blasting media
- Inspect metal surface imperfections / defects
- Test indication of oil or water in compressed air
- Test conduct metric analysis of water-soluble ionic contamination of blasting media
- Inspect pre-cleaning or solvent cleaning of surface
- Measure compressed air pressure
- Inspect degree of cleanliness required
- Measure surface profile of blast cleaned surface
- Assess surface cleanliness of blast cleaned surface
- Assess surface cleanliness soluble salt contamination on blast cleaned surface
- Inspect coating material storage conditions
- Inspect type of coating material to be used
- Monitor thinning, mixing, induction time and pot life
- Inspect type of coating application equipment and tools
- Monitor application method, type and pattern
- Measure wet film thickness by notch gages
- Non-destructive measurement of dry film thickness of non-magnetic coatings applied to ferrous surface
- Non-destructive measurement of dry film thickness of non-conductive coatings applied to non-ferrous surface
- Destructive measurement of dry film thickness of coatings
- Monitor re-coating and final curing schedules
- Test MEK resistance of Inorganic Zinc Rich Primers by solvent rub
- Test film hardness
- Measure the adhesion of coatings applied
- Test pull-off strength of coatings applied
- Test discontinuity (holidays or pinholes) of nonconductive coatings and linings

Health, Safety & Environment:

- Understand local and international legal and HSE regulations
- Project specific HSE requirements
- Witness tool box briefing, safety surveillance & safety audit
- Attend monthly management safety committee meeting
- Conduct project safety co-ordination committee meeting (Permit to work system)

Administration:
- Delegation and distribution of responsibilities
- Employee recruitment
- Employee training needs & wellness programs
- Employee appraisal
- Constant interaction, counseling & team building session
OBJECTIVE:
Obtain a position that will allow the utilization of my skills tempered by over fifteen years of professional experience in Coatings and, ultimately, to become a long term, highly valued employee of a successful organization.

Nationality: Indian

Date Of Birth: 14.07.1964

Education Qualification:
Bachelor in Science (Chemistry)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4301 to 4350 of 6742)Go to Search Parameters...
Brief Description
B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.
Inspection in Welding and Fabrication in Oil And Gas Industry, Mechanical Engineering
Safety Engineer, (NEBOSH) Lifting & Rigging Supervisor, (NVQ 3.)
Have working experience in 6 countries; around 15 years of experience in Project Management, Project Engineering, Engineering Design, R&D, Construction, Technology Management and Business Development. Have extensive experience in subsea/offshore pipeline, cross-
Highly accomplished, self motivated and performance driven young professional
Automation, Motor controls, and Programmable Logic Controls
Estimating Engineering for Oil & Gas Projects from FEED to EPC stage.
FPSO management include, technical, operational as well budgeting.
B.Tech in Electronics & Instrumentation, working on under water hydrographic equipments
Looking for a MWD career
Design / Project engineer: Control & Automation - food & automotive industry
Qatar Petroleum
Over Three & half years experience in System Administration, Network Administration & System Management in Multinational Software Company & Industry. Good interpersonal skills, ability to work well and hard with multidisciplinary teams, got maximum exposure in MS Windows Systems Administration
Like learning something new. Almost 4 years experience in oil&gas and pharmaceuthical device company. Familiar with standards API, GPSA, ASME, NFPA, and program Hysys, Pipesim, Pipephase, Chemcad, Flaresim.
BS of Petroleum Engineer, with a Waterflooding Postgraduate of 2 years, I work with Ecplise and Grid, I made my own project by my own.
Chemist (BSc.) Analyst with a broad technical knowledge combined with outstanding leadership ability and creative problem solving skills in both strategic and tactic areas
Programmer
Fully qualified Project Manager for International Engineering projects
I am piping engineer having experience of three and half years. I have done piping stress analysisin CAESAR II software. I also have 3-D modelling exposure.
B.SC.Mech.Eng., Welding Eng., Project Manager
Skilled MSc ME, specialization Control Systems and Mechatronics
Experience in piping design/layout for industrial, refinery, petrochemical and power plants using CAD soft wares such as PDS, Microstation and AutoCAD.
IT System Analyst, Business Analyst, Business Process Analyst, Business Process Reengineering
Petroleum Engineer
Mechanical Superintendent
My drilling fluid experience and Petroleum Engineering background has encouraged me to study numerous facets of the Oil & Gas industry.
Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:
Maintenance and projects supervisor
1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills
Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.
International civil engineer with fluency in English, German, and Spanish language, with exprience in construction (supervision and design) of power plants, oil & gas projects, infrastructure projects (sewage plants), and dams seeking for jobs worldwide
Power Plant Chemistry, Water Treatment Plant commissioning , Boiler Water Commissioning
acting in a operation and maintenance of several equipments, such as: Internal Combustion Engines ( Caterpilar , MAN MWM, Mitsubishi, Wartsila type W200, SACM type 240-D), Fresh Water Generators (Water Maker - MECO), Lubricant and Heavy Fuel Oil Purifiers (Alfa-Laval), Main Air Compressors, Pumps...
i have completed B Tech Computer Science Presently I Am Working In Satyam Computer In India As A Software Engineer
Proven oil & gas finder with approximately 100 prospects drilled (88% success rate) seeks position as an exploration, development or acquisitions geologist.
Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make
International Project, Construction, and Contract Management
Behavioral Based Safety, Ergonomics, Human Factors, and Oil and Gas Construciton Safety Professional
M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.
Strongly involved in pollution prevention, management and control. Participated in pre-treatment of drilling oily wastewater/mud waste treatment in Agip-Saipem Rig -23. Presently exhibiting level 1 standard in Environmental protection. Good knowledge of design/fabrication of engineering facilities
Project Engineer (Instrumentation & Control)
German graduate Structural and Optimization Engineer with 5 years experience in the German industry with a practical experience and familiarity with modeling&optimization softwares(like CASERII,ANSYS,ABAQUS,iSIGHT)
Qualifications: B.Sc.(On Petroleum Drilling and Production), University of hydrocarbon and chimistry, Boumerdes, Algeria, Jun-2001.
MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.
3 + Years of experience in petrochemical industry-Electrical Engg
Marine mechanical engineer with good HSE and safety asspects
Petroleum Eng., Reservoir Eng., Highly Computer Skills, OFM Program and Eclipse Simultor, Well test Analysis, Open &cased Hole Logs Interpretation
Trouble-shooting and responsible to develop, coordinate and implement maintenance projects, understand customers, competitors and suppliers, from both an information and strategic viewpoint. Developing and mentoring technicians and also provide support for hardware and software maintenance.Exp:4yrs
Please find enclosed a current copy of my cv. I am extremely well qualified in Oil/Gas HSE and am well suited for this environment.
Mechanical Maintenance professional with exceptional interpersonal and communication skills and an extensive background in following broad based competencies: Static/Rotary Equipments Inspection/Repair, Gas Turbine O/H,ATR Material & Manpower Planning, SAP 4.6C PM & MM Module
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   [ 87 ]   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com