Resume - Instrument Technician with over 25 years experience in Project Engineering, Fiel...

Misco Jobs

Resume #62589

CONTACT INFORMATION:
View contact information...

Personal Profile

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC's, and DCS's. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the National and International Market.

Strengths
Able to communicate at all levels; prepared to follow up and complete breakdowns; have mutual respect for co-workers in various fields with in-depth knowledge of interface requirements within multi-disciplined projects such as mechanical, piping, electrical, software and safety; enjoy implementation of new equipment and ideas. Participate in project hazardous Analysis and Operability Studies and safety reviews as part of a multi-disciplined team. Review project technical submissions to ensure compliance with internal and international engineering standards.
Over 5 years experience with an International Company (Lucite International) recognized for its Extreme Safety Standards.
Career History
ESCOM OCGT Plant Mossel Bay
August2006 to July2007
Contracted to Siemens Ltd as Site Manager for the Electrical installation of 3 Open Cycle Gas Turbines which drive 150 Mega Watt Generators. Initial scope of work was to supervise and control off loading of some 500 tons of equipment per unit into Siemens lay down area. The second shipment arrived some 4 weeks later followed by the third 5 weeks thereafter. Assisted by Safety and Quality Manager, Site Commercial, Sub Contractor and Siemens AG Electrical Installation Manager all planned project dead lines were met even though no project plan could be adhered to due to delays by civils. Daily activities included morning meeting with Siemens SSM, weekly report, and monthly progress claim. Staff recruitment escalated from 10 members to a peak of 158 as access and acceleration patterns had to be met. Some 110 km of cable were laid and 4000 termination completed. On completion of the bulk of contract Siemens Ltd were congratulated by D. Timm Siemens AG Electrical Installation Manager for a job well done.

S.A.B. Breweries Prospecton –Durban
January 2006 to July 2006
Contracted to S.A.B. via Dynotronics, immediate function was to take over daily maintenance of high speed beer bottling, pasteurising, keg, and packaging plant, there after plan and prepare and execute shutdown on line 6 3 5. Achieved status as 'Builder of the Week" a first for any contractor normally reserved for permanent employees.

Engen Oil Refinery –Durban
August 2005-to November 2005
Contracted to Kentz for the Clean Fuels Project, Inspect calibrate commission all Honeywell (Smart) flow, pressure, temperature transmitters, Fisher field view valves and positioners. This equipment was linked to the Honeywell TDC 3000 and ESD systems. My secondary function was "Selling" Loops or Pack's to the client, first to Fluor and then Engen. The project was run on a tight schedule and working 140 hours per fortnight was the order of the day, Kentz E&I were congratulated by the Client for a "first "in the history of completion ahead of schedule.

Natal Analytical Services
February 2005 – July 2005
Joined a small Analytical company as this promised to be an exciting challenge which I was hoping to be a part of by providing a service in this field after the new Pollution Bill was passed in February 2005
The ranges of equipment I have been exposed to in this field are:
Procal Stack Monitors
Mipoy Laser Dust Monitors
Monitor Lab (Environmental machines monitoring 02, S02, N02, C02)

Kagera Sugar Mill- Tanzania
June 2004 – January 2005
Senior Instrument and Electrical Technician.
Joined a Sugar Rehabilitation team that rebuilt a Sugar Mill in Tanzania – Kagera Sugar Mill. The Mill had been decommissioned 8 years ago, with great effort and perseverance the Mill was commissioned again in October 2004.
The system consisted of 3 Allen Bradley PLC coupled via Servo running an Adroit Scada Package.
The Mill also covered a wide range of Instrumentation as it consisted of 2 new Alstrom 75 ton/hour boilers plus 2 x 2.5 MW generator sets.

Lucite International
June 1999 – June 2004
Instrument Technician:
Responsible for day to day running of the Perspex Factory, i.e. Standby, Planning Maintenance, Projects, Quality Control, Alarms and Safety, and Annual Shutdown.
Reporting to the Maintenance Manager and Engineer.

Ola Ice Cream & Acrylic Products
June 1997 – June 1999
Instrument / PLC Technician
P.L.C. Installation
Redraw all documentation to "As Build", general maintenance commission and document 75 KW microwave generator plant – Allan Bradley PLC and Citech Scada.

N.C.S.
October 1996 - May 1997
Instrument / PLC Technician
P.L.C. Installation
Level installations N.C.S Isipingo
Install and commission, load cell system to 10 x 40 ton vessels.

Intershore- Angola
July 1996 – August 1996
Instrument Inspection
Inspection of all instrumentation equipment for Intershore Platforms North N'Dola and South Sanha in the Gulf of Cabinda. Drawings, updates and commissioning. Quality control of class 1 division 1 intrinsically safe equipment on desalination, oil and gas separation systems.

CSE-Paper & Pulp-Indonesia
February 1996 - June 1996
Part of a team of 10 Instrument Tech's that were contracted to repair and improve a self contained
Factory in Asia. The section designated to myself; Evaporator Plant, Recovery and Multi-Fuel Boiler's
As a team we shared our knowledge and expertise to complete the project.

Kennedy Projects
December 1994 - January 1996
Sub contracted to and ran the following contracts and projects.
Service and standby contact to N.C.S. Resin Plant – Isipingo
Service contract to V.D.B.& J - Service & Standby Coates Brothers.
N.C.P. Installation. Paper Chem. Service & Standby
Pneumatic Installation at N.T.E. Mondi Eshwepe.

Mantec
July 1994 – November 1994
Contract position at Durban Fibres. Plant upgrade and new Orssi D.C.S. installation.

Universal Industries (Tiger Oats group)
June 1990 – June 1994
Instrument Technician with the following responsibilities.
Maintenance and upkeep of instruments that controlled a dry milling plant extracting starch and converting it to glucose; continuous configuration changes to D.C.S. including backing up of system; updating drawings; controlling and implementation of a P.L.C. installation that controlled a batching sequence. From August 1992, took full control of Instrument Department as immediate Supervisor was promoted to Production Manager.

V.D.B. & J (Unilever group)
December 1988 – May 1990
Instrument Mechanic with the following responsibilities:
Upkeep of instruments that controlled an edible oil refinery. This extended to fault-
finding that overlapped other engineering departments. Responsible for small projects from start to finish.

Lever Brothers (Unilever group)
June 1986 – December 1988
Instrument Mechanic with the following responsibilities:
Upkeep of instruments that controlled a soap manufacturing plant. This included stand-by as well as servicing V.D.B. & J to which I was designated.

Instromatics
June 1984 – June 1986
Instrument Mechanic with the following responsibilities:
Originally employed to work on "Wellies" project on Lever site, contracted to Kent Inst.
To calibrate and loop check each instrument over a 12 month period. Acted as
Service Technician to various companies such as S.A.B.; Toyota S.C.I.; Dunlop;
Universal Mills; Saicor & Tioxide, Illovo Sugar, Chrome Chemicals,

Gap Year
August 1983 – May 1984
Toured England, Ireland, Holland, Greece, Canada, United States, & parts of South Africa.

Tescor 1984
August 1982 – July 1983
Instrument Mechanic.
Duties included maintenance of hydro-electric power station, radio network and hydro monitoring system.

Escom
June 1979 – July 1982
Qualified as Instrument Mechanic from Escom, completing practical training at Rosherville and in service time at Kragbron Power Station.

Personal Details

Surname Langley
Name Peter
Date of Birth 1 May 1959
Age 46
Nationality South African
Marital Status Married
Children 3
Drivers Licence Code 08
Education Matriculated 1976
Apprenticeship Escom - Instrumentation

Languages English, Afrikaans, Xhosa (Fair)
Hobbies & Interests Wave Ski, Squash, Motor cycling, Fishing, Reading

Skills & Experience on the following Equipment

Allen Bradley Plc Installation & Fault Finding
Allen Bradley Plc Basic Programming Experience
Modicon Plc Installation & Fault Finding
Modicon Plc Basic Programming Experience
Mitsubishi Plc Installation & Programming
Hartmann & Braun 5 Years Experience with Various External Courses
Telemecaniqe Installation & Fault Finding
Honeywell T.D. 3000 Basic Experience
Kent K90 Training & Fault Finding Experience
Orssi D.C.S. Installation
Sentinel Scada System
Citec Scada System
Adroit Scada System
In Touch Scada System

Installation & Engineering Of The Following

Krohne Magflow Krohne Coriolis
Krohne Density E & H Magflow – E & H Mass Flow
E & H P.H. Meter E & H Temp. Tx.
E & H Ultrasonic Level E & H Press. Tx.
Kent Magflow Kent Press. Tx.
Kent Level Tx. Kent Temp. Tx
Kent Recorders Honeywell Controller
Honeywell Press. Tx. Honeywell Control Valve
Fisher Control Valve Fisher & Porter Magflow
Nellis Control Valve Tuchen Hagen Control Valve
Mason Neelan Control Valve Foxboro Pressure Tx.
Foxboro Temp. Tx. Foxboro Conductivity
Foxboro Level Tx. Rosemount Pressure Tx.
Rosemount Temp. Tx. Rosemount Magflow
Rosemount Density Fuji Controller
Fuji Pressure Tx Fuji Level Tx
Fuji Recorders Shimaden Controller
Shinco Controller Hengsler Counters
R.K.C. Controller Henglsler Batch Meters
Pneumatic Range: Festo – Bosch – Asco- Burcket – Joucomatic
Actuator Range: Norbro – Keystone – Amery – Natco

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 7054)

Go to Search Parameters...

Brief Description

I am a chartered Engineer with ten years experience in the area of Instrumentation & Control. I have a 2(H)1 degree in instrumentation & Control from the University of Teesside, Middlesbrough, U.K. My experience spans trades, E+I design, senior/lead office roles in a global consultancy, site commiss

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

I am having experience in Both static & rotating equipments

BE Chemical

Basic and detail design of electrical power generation, distribution & utilisation system and various system studies as short circuit & earth fault study, relay co-ordination study, load flow study, motor starting & voltage drop study etc primarily in manual in the beginning of career and later in E

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

25 years exploration and production experience. Maintenance engineer.

Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.

Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,

Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.

Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.

Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.

I am interested in a position in the EHS field. I have a degree from University of Findlay

My experiences in mechanical works covered maintenance/construction of oil/gas processing plant and power plants. See attached Resume.

Over 14 Years of Strong Experience in Project Management, Estimation, Design & Procurement in Petroleum OIL,LUBES, Gas, and HVAC System.

Progressive and diversified experience in operation of gas pipeline transmission and oil field production. Proven track record in: Legal negotiations; Operations supervision; Budget management; System design; Project management; Conflict resolution.

Consulting Services Plant Construction & Modifications Reliability Inspections & Risk Assessment Maintenance Programs Pressure Equipment Design QA /QC Management Project Engineering & Management Procurement of Equipment Repairs and Alterations of Pressure Vessels and Storage Tanks.

A drilling professional with over 20 years experience. Able to work effectively in both field and office drilling positions with the ability to achieve results. I can offer proven technical, planning, execution, leadership, decision making, risk management and communication skills.

Wide ranging petroleum engineer with successful record in reservoir development planning/management, 17 years: BHP, PGS, BP, Agip, Burlington, Phillips, Marathon, UT Austin(1982-85), NL Baroid, international experience in Nigeria, Kuwait, Egypt, Angola, Norway, Algeria, Syria, NorthSea

Cost Engineer with gas pipeline & oilfield production background also some power plant and mining background.

Having completed my service at the age of 60 in Sept, 2000, I still want to live a busy life. Earn and live a better living exploiting 36 years of my experience in oil well drilling industry.

International Experience Superior Client Performance Evaluation

1. Project Manager for the engineering, procurement, construction and installation of Substructures (Jackets), Topsides, and Gas Compression Modules, FPSOs, Submarine Pipelines, Submarine Cables, Mooring Buoys and PLEMs ¨C Offshore Oil and Gas Industry.

Oil and gas phd in geology

Qualified and experience AutoCAD Designer familiar with the technical language of the oil and gas industries Civil & Structural drawings using AutoCAD, Isometrics, Process and Instrumentation drawings. Experienced with one of Shell’s major projects in the Niger Delta (Forcados Yokri Integrated Pro.

Five plus years of process engineering experience in the field of refinery and petrochemical with esteemed organizations in India and world.

Drilling Systems Offshore Instrumentation Engineer with 12 years experience

(IRCA, UK Certified Lead Auditor QMS ISO 9001:2008)

Diploma in Civil Engineering Studied

Seeking as an Engineer – Instrumentation in Automation, Design & Detailed engineering activities serving core industries that can utilize my skills and provides potential to enhance my knowledge and to attain goal of company.

Graduate Civil Engineer and Structural Engineering M.Sc., 6 years experienced in Offshore structures. Experience in jackets (FEED and Detail) and Semi-submersible (FEED and Detail) projects. Easy learning and excellent skills in softwares such as SACS, ANSYS, ABAQUS, GT Strudl, Solid Works, Patran,

Piping

MSc( Material Sciences & Technology),Certified Welding inspector-(AWS ¡V CWI) Certificate No. 05102011, CSWIP 3.1 Certificate No.26154. SAUDI ARAMCO (WELDING & MATERIAL INSPECTOR) APPROVAL No. SAP # 70004856, Well versed with international standards and ASME, API, AWS, ASNT and ARAMCO Standards.

Piping design and supervision experience, across a number of fields

2D and 3D seismic experience, QC- and seismic field engineer, basic knowdledges of process (Promax), strong Knowledges of sismic design (Mesa), Data base managment (office tools)

I am specialized in Process Analysers and Analyser System House house servicing and commisioning.Having More than 9 Year Experience .

I have a broad range of experience in both technical operations as well as management. Currently I am a Well Test Supervisor but I would like to look for position as a Well Services Engineer or Completion Supervisor. It is my career decision to be a specialist in all well services and completion.

Drilling Engineer

E&P Hydrography , GIS, Geoinfo Mgmt,Land Surveying, GPS, Coordinates Ref Sys, Survey QC Rep,Construction Surveying,Geomatics Records Mgmt, ASSAI – EP Catalogue

Now i present work with odebrecht company as QA/QC MANAGER

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

Sr. Production Geologist / Team Leader, New Oil

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

Fifteen years of shipyard experience (technical and management), overall twenty-one years of mechanical design and project management in large industrial sites.

Operational, process, construciton, commissioning jobs

More than 25 years experience in electrical field and overseas on-shore,off-shore oil/gas projects in construction,commissioning,preservation,maintenance,training/very good communication skills:English-Russian fluent,French-Italian good level.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out