Resume - Strong background in petroleum and reservoir engineering (MSc degree from Norweg...

Misco Jobs

Resume #62696

CONTACT INFORMATION:
View contact information...

Date of birth: 11 November 1981
Nationality: Azerbaijani
Status: Married

ACADEMIC QUALIFICATIONS

BSc Mechanical Engineering, Azerbaijan State Oil Academy 2002
MSc Petroleum Engineering, Norwegian University of Science and Technology 2005
MSc Environment and Oil Industry, Azerbaijan State Oil Academy 2006

PROFESSIONAL BACKGROUND

SHIRVAN OIL OPERATING COMPANY LTD
Jul 2005 – Present Reservoir Engineer – Baku, Azerbaijan
Worked in a team responsible for investigation of opportunities for production enhancement and increasing recovery by means of infill drilling opportunities, water injection and additional perforations in mature stratified reservoir using classical reservoir engineering. In my role as a reservoir engineer I have worked in the following areas:
* Recovery calculations by material balance and other means
* Well performance inflow calculations and general well analysis
* New wells planning
* Layer production allocation by decline curve

BP EXPLORATION (CASPIAN SEA) LTD
Jul 2004 – Aug 2004 Petroleum Engineer (internship) – London, UK
As part of Chirag-Deep Water Gunashli Reservoir Management Team I was involved in ACG Phase-3 Produced Water Injection Performance Prediction Study. The main goal was to estimate an injection rate profile under different static and dynamic reservoir parameters and implement reservoir sensitivity analysis.

Aug 2002 – Jul 2003 Assistant Mechanical Engineer / Mechanical Engineer – Baku, Azerbaijan
While in Maintenance & Integrity Management Team I worked on a wide range of projects. I was promoted to Mechanical Engineer in Apr 2003. In these positions I was responsible for the following key activities:
* Assist Maintenance Planner in Computerized Maintenance Management System issues
* Produce monthly Condition Monitoring and Maintenance Efficiency reports
* Responsible for Corrosion & Chemical reports and Key Performance Indicators
* Lead Risk Based Fabric Maintenance Campaign
* Assist Senior Structural Engineer in Subsea Pipelines and Structural Integrity maintenance issues
* Participation in Incident Investigations
* Assist with providing support and technical guidance to new influx of engineering staff

Jul 2001 – Aug 2002 Technical Assistant – Baku, Azerbaijan
Worked as a summer student for the first couple of months, I understood the basics of equipment condition monitoring and maintenance, and then carried out the following activities:
* Inventory control
* Register of safety related devices
* Monitoring of lube oil sampling

TRAINING COURSES PRESENTED

Aug-Sep 2002 BP Graduate Induction Program
* Advanced Safety Audit / Behavioral Safety Training Course (Vision)
* Behavioral Skills Course (OTI)
* Microsoft Office Computer Programs (ATI)
Sep 2002 Project Management Essentials (ESI International in association with the George Washington University)
Nov-Dec 2002 Upstream Facilities Engineering Training (AMEC)
Feb 2003 Coating Inspector Training and Certification Program (NACE International)
Feb 2003 Integrity Management Pilot Training (BP)
Mar 2003 Basic Offshore Safety Induction & Emergency Training (OTI)
May 2003 Time Management Course (OTI)
Jun 2003 Basic Drilling, Completion and Workover Operations (Petroskills – OGCI)
Jul 2003 Overview of Pipeline Engineering (Trevor Jee Associates)
Dec 2005 OFM 2005, Well and Reservoir Analysis Software (Schlumberger)

LANGUAGES

Azerbaijani - Native
English - Fluent
Russian - Fluent

References available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6635)

Go to Search Parameters...

Brief Description

Mech/weld inspector, I have held c.s.w.i.p. cert for 22 years ,5 year time served boilermaker apprenticeship, presently working on the Qatif gas oil separation plant Saudi Arabia as senior mech/weld inspector

PROFICIENCIES: Practical knowledge of Preventive Maintenance, Vibration Analysis, Oil Analysis, Non-Destructive Testing, and Laser Alignment. Knowledge of rotating equipment, bearings, lubrication. Knowledge of MS Office and various CMMS. Good verbal, writing and interpersonal skills.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

qa/qc engineer or inspector

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

Having experience in maintenance,overhauling,repair,operation,trouble shooting in oil, gas rotating equipments

Process Engineer , Oil / Gas Production Equipment , design, procurement, API, ASME Standard, HYSIS , Gas Compressor Stations, Glycol Dehydration Units, Condensate Recovery Units/ Dewpoint Control system

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Strong background in petroleum and reservoir engineering (MSc degree from Norwegian University of Science and Technology). About 5 years of experience in oil and gas industry including national oil and major E&P companies.

Quality Assurance Quality Control Quaity Manger

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out