Resume - Hands-on engineering and construction individual with extensive experience in al...

Misco Jobs

Resume #62793

CONTACT INFORMATION:
View contact information...

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environment [tolerance for stress] in the area of refineries, oil & gas processing, power plants, petrochemicals and open pit mining. EPCM projects covered scope identification, engineering, brownfield & greenfield construction, turnover packages, and construction contracts management/procurement.
Ability to streamline procedures that improve productivity, cost controls and safety levels through expertise in:
Organization & Project Management Safety & Compliance Management
Preventive Maintenance & Troubleshooting Equipment API / ASME Code Specification
Specializing in:
GOSP's and WCTP's facilities Fossil fueled power plant and steam turbines
Tank farms and offsite utilities Compressors and pump stations
Onshore and deep sea loading terminals Plant subsystems fabrication and erection
LNG trains / Cryogenic equipment Field & yard fabrication – tanks, spools & bulk structural steel

Year Company - Location Client - Project Position
2007 - AMEC Americas – Canada ►DeBeers – Victor Diamond Project Site T/O Engineer
2005 - 2006 Worley Parsons – Iraq ►US Army Corps of Engineers - Restore Iraq Oil Project Area Engineer
2000 - 2004 Onyx & Co. – Canada ►Multiple Projects throughout Montreal Area Project Coordinator
1997 - 1999 Kellogg Brown & Root – Algeria ►Sonatrach Petroleum GL1K LNG Trains Overhaul Construction Engineer
1995 - 1996 Doyle Construction – Canada ► Multiple Projects throughout Montreal Area Site Coordinator
1993 - 1994 Norse Mekaniske A/S – Norway ► StatOil - Troll West Block 31/2 Onshore Support Mechanical Supervisor
1990 - 1992 Pipera CHP Plant – Romania ►S.A. Electrica - 2 × 3.5 MW Upgrade Project Plant Engineer
1987 - 1989 ThermoEnerg - Romania ► Cernavoda NPP PHWR CANDU-6 - Unit # 1 700 MW Engineering Technician
1984 - 1986 PromoTherm – Romania ►TPP South Bucharest - 2 × 100 MW Block Rehabilitation Mechanical Technician

Education &
Training Year University / Issuing Authority Degree Discipline
2004 - 2005 Quebec Ministry of Education Certificate Construction Management
2001 - 2003 U. of Montreal - HEC Graduate Diploma Operations Management
1995 - 1996 Dawson College Attestation of Studies CNC – Numerical Control
1994 - 1995 St-Laurent College Attestation of Studies CAD
1984 - 1990 U. of Bucharest – Polytechnic Institute M.Sc. - Engineering Mechanical

Professional
Membership European Federation of National Engineering Associations [FEANI] – EURING # 28633
American Society of Mechanical Engineers - ASME # 8604803
OSHA Tickets HSE / SHMP / Hazard Recognition / WHMIS / H2S / Fall Protection / First Aid / LOTO

Work Experience Details

2007 – to date Site Turnover Engineer - AMEC Americas
Responsible for final handover, site implementation of documentation acceptance, transfer activities from project & construction group to commissioning and client operations team. Developed team member's requirements and skill sets, roles and responsibilities, detailed assignment definitions. Defined document flow & methodology for preparation & submission of turnover packages w/ client. Compiled / reviewed & approved final documentation prior to client submission for transfer of care, custody & control. Managed QC records database, systems turnover processes, liaised w/ client personnel on system performance & quality record issues. Reviewed and approved construction contractor QC records, monitored status for compliance to specs / procedures, construction quality and turnover processes. Supervised preparation, content & flow of system commissioning manuals for customer acceptance. Coordinated / monitored project punch lists, ensured / verified punch lists & check sheets mitigation and sign off. Performed process systems walk downs, reviewed & established the completion status, identified outstanding items to be completed for final system turnover to the client. Responsible for off-sites & utilities mechanical completion and commissioning. Acted as site construction engineering manager cross-shift.

2005 – 2006 Area Mechanical Engineer - Worley Parsons Iraq JV
Performed equipment assessment, engineering analysis for projects ranging from WCTP / GOSP, pumping stations, offshore loading terminal to well workover / water injection stations. Covering North Area of Operations, technically accountable for evaluating & selecting process mechanical equipment needs, defining / specifying equipment, scope of work definition, budgetary estimating, generating mechanical datasheets / specifications, issued requisitions packages, and ensured equipment and machinery upgrading / installation is correct. Established supplier's requirements' ensure that process equipment is developed to operating parameters in compliance w/ current codes / plant requirements. Ensured that process equipment performed to specification, developed turnover documentation, ordered and cost justified capital equipment, trouble shot and solved specification problems. Involved in the early stages of the ABOT Upgrade Project to evaluate tenders for the Deep Sea Terminal contract and followed through after contract award as the South Area Support Engineer on the revamping contract for construction, installation and commissioning of the loading terminal. Reviewed vendor documentation, issued technical bids evaluation, reducing capital cost in compliance w/ FAR. Member of Squad Check Review for incoming packaged equipment.

2000 – 2004 Project Coordinator - Onyx & Co.
Assisted in operating a small general construction company.
Responsibilities included blueprint review and project analysis, preparation of construction documents, scheduling, subcontractor's selection and ensured compliance with specifications, codes, safety standards in desired timeframe, quantity and quality. Provided technical assistance to field engineers and craft foreman. Managed the toolbox meeting to assure compliance with safety and health regulations. Analyzed all applicable requirements [company, customer, regulatory] and developed work guidelines which encompassed the areas of performance, quality, and schedule and budget compliance. Ensured that all drawings, reports, schedules and other documents met the requirements of all relevant legislation, specifications, procedures and codes of practice. Ensured that all engineering support provided satisfied the appropriate asset safety case. Enforced that performance standards were not compromised by engineering activities. Contributed to the development of the workload, schedules and estimates for all the individual work scopes and integrated plans.
Remained with the company until legal dissolution.

1997 – 1999 Construction Engineer - Kellogg Brown & Root
Duties included construction and coordination, systems inspection and isolation for shutdown/maintenance, commissioning of the LNG plant and loading terminal. Responsible for off-sites mechanical outstanding punch lists, performed detailed precommissioning, prestartup inspections Interfaced on behalf of the subcontractors regarding area access, determinate local area requirements, planned / organized work with anticipation for needs, potential problems with foreign and local national subcontractors. Completely overhauled the LNG / LPG process equipment and facilities for Sonatrach - National Algerian Oil & Gas Co. Rebuild the concrete seawater intake and refurbished the vertical centrifugal pumps eliminating the outdated equipment. Overhauled / refurbished specific LNG process/mechanical equipment, valves, pumps, gas reinjection compressors, exchangers, and related piping / fittings up to 42". Removed & replaced waterwall, superheater and damaged structure / refractory for 360t/h @ 70bar Mitsubishi boiler. Coordinated and supervised up to 200 construction personnel to assure preventive maintenance, breakdown repair and new equipment implementation.

1995 – 1996 Site Coordinator - Doyle Construction
Estimated work orders, ordered material and equipment, planned and scheduled manpower needs by craft. Scheduled work execution, obtained necessary permits, supervised craft activities, coordinated work plan to avert bottlenecks, monitored progress and performed QA/QC tasks. Conducted and documented weekly safety meetings. Prepared site daily reports and documentation as required. Accrued responsibilities included choke point troubleshooting, liaising with customers, organizing outside repair and service work, advising / ordering parts / materials and service on a range of construction equipment.

1993 – 1994 Mechanical Supervisor - Norse Mekaniske A/S
Mechanical technician jointed to a dedicated team for assemblies checks, testing and repairs of hydraulically operated cylinders and lifting equipment. Performed pre and post maintenance checks on equipment to ensure efficient and safe operation. Duties included monitoring the calibration and inspection of the testing bank, inventories and ordering replacements for unserviceable tools. Developed equipment downtime reports, prepared logs for repairs / preventive maintenance and in service hours. Ordered, received, stored and issued spare / repaired parts. Identified, recommended and implemented improvements to line procedures, equipment and/or facilities to enhance the productivity, quality or safety of products, processes and/or procedures.

1990 – 1992 Plant Engineer - Pipera CHP Plant
Major fossil fueled TPP equipment included 2 x 50t/hr B&W boilers @ 450 °C & 40 bar, 3 x 100Gcal/hr @ 2200 t/hr hot water generators, 2 x 3.5 MW ABB steam turbines, water treatment plant, heavy fuel oil / gas storage & heating facilities, steam / water distribution systems and voltage transformers. Managed, planned, evaluated and coordinated the execution of preventive / predictive and corrective maintenance, as well as outages. Successful capital projects include major upgrades to the heavy fuel / BM system and water treatment plant resulting in an annual savings of around 5%. Coordinated major retrofitting outage - 65% boiler waterwall tube replacement and turbine overhaul. Assisted and acted as the plant liaison with outside agencies such as NPG – national power grid, corporate office departments and outside contractors. Supervised unionized employees within the confines of the collective bargaining agreement.

1987 – 1989 Engineering Technician - ThermoEnerg
Provided on-site construction support associated with the fabrication and installation of the CANDU type pressurized heavy water reactor cooling systems. Monitored daily construction progress, technical assistance, QA/QC and checked installation for project design conformance. Verified and documented that the system/equipment and utilities were erected and built to fulfill its purpose and specified requirements, operate in a safe, reliable, and consistent manner. Recorded field changes, completed post construction punch lists. Assisted with onsite fabrications, substructures, outfit of piping and mechanical equipment including testing and turnover. Conducted joint [with HSE representative] routine job safety audits, logged mechanical PTW such as Confined Space, Safety Clearance, LO/TO.

Work Experience prior to 1987 – upon request.
References – upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5501 to 5550 of 6411)

Go to Search Parameters...

Brief Description

Conducting procurement, sales and foreign purchases of Zagros Methanol producing Company (Mega Methanol Plant)in Assaluyah

mechanical engineer having knowledge of AUTOCAD, IDEAS, CATIA v5

Certified civil engineer with a strong background in oil & gas, industrial, building projects

AT PRESENT I WORKING IN DUBAI ELECTRICITY AND WATER AUTHORITY ( DUBAI GOVERNMENT SECTOR) AS A ELECTRICAL SUPERVISOR . I HAVE 11 YEARS EXPERIENCE IN INSTALLATION & MAINTENANCE OF ELECTRICAL WORK ,CONTROL & MONITORING CONTROL OF CONTRACTORS WORK.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I can work with any environment

Civil / Structural Engineer, Project Engineer

I have 8 Years exp in Oilfields & industrial: as an instrument forman to maintain all process erlated instrumentation works includes automation

QA/QC in Air cooled Heat exchangers, Boiler,Structurals, Wind mill tower, Mines equipments,etc..

Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

PROCESS AUDITS/TROUBLESHOOTING,PROCESS OPTIMIZATION ,PROCESS PROJECTS,• Exp. in Project management - Erection and commissioning of 320 KA Pot room.

BSc (Hon) Mechanical Engineering; 3yr part time MBA, only report submission pending . Primary skills & experience include: Project Management, Engineering, Business Development and Relationship Management, Procurement Management, Financial Management, Health Safety & Environment, Engineering Design

Providing technical review and recommendation for peers. Knowledge in Project Managemant, HYSYS. Training in ISO 9001:2000, OHSAS, ISO 14001:2004

Chemical engineer seeking new oppertunities

S.S.LC. From Board of Kerala

Vast Experience in Document Control, Administration, Human Resourses and IT

I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

Civil, heavy, industrial, International, Construction

25 yrs mining experience. Engineering. Operations. Supervised heavy equipment. Team player. Give job 100%. Quick learner. Show respect to all individuals. Represent employer with professionalism. Impeccable attendance & safety. Open to international positions

I have had experience in most forms of drilling, workovers and stimulation. I have limited coil tubing experience, but have a good working knowledge. I am used to working overeseas with people whose first language is not english.

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

GIS analyst , GIS Developer , GIS Trainer SDE administrator , GIS Data manager

Professional Engineer, MBA, offshore oil & gas, Quality management, 11 years

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

This is Rishikesh D from CHENNAI - INDIA, working in Ford India having 5 years Experince in Maintanence Field. Knowledge about breakdown maintanence, Preventive Maintanence, Predicitive, Condition monitoring, TPM systems and exposure in hydraulics, Pneumatics, Bearings and effective communicator

Professional Qualification: Bachelor of Engineering (Mechanical); Gulbarga University, Gulbarga. Year of passing Oct. 2000 With the aggregate of 78%, First Class with Distinction. Worked as Junior Erection Engineer for Power Engineers Under 2x25mw Wadi Power Plant

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

A competent and enthusiastic hydrogeologist with 4+ years of experience in the field of earth science. Specialises in dewatering, recharge and groundwater management projects. Has experience in project management, river basin management plan, drilling and pumping test supervision,

Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction

Hand and computer skills+designs, calculation and workshop drawings+site coordination

Computer software as: Office - AutoCAD- mechanical desktop - working model + fluent in speaking, reading, writing English & Turkish + Farsi is my native language+ Azeri is my mother tongue

I am a Chemical Engineer with Masters in petrochemicals and polymers. Problem analysing and solving capabilities supported by strong technical background and enhanced by effective communication skills are my major competencies.

Project Management, Telecommunication

Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petrochemical plant operation as a field/panel operator.

Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.

Entry Level mechanical engineer

QS/ISO 9000, FMEA/ Control Plan/PPAP

Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,

Planning & Coordination Engineer

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.

Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years

Electrical, Instrumentation, SCADA

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

2 years experience in power plant chemist, 3 years experience in industrial water treatment, well known water chemistry and corrosion chemistry, process and troubleshooting

Health safety and environment officer

Mechanical Engineer with 16 years experience in Saudi Arabia, Abu Dhabi, Malaysia, and India. Working in Oil and Gas Industry and Power Plant Construction / Commissioning and Maintenance.

First Prev 101 102 103 104 105 106 107 108 109 110 [ 111 ] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out