Resume - Test Engineer

Misco Jobs

Resume #6289

CONTACT INFORMATION:
View contact information...

EDUCATION
November 1996
University of Gadjah Mada Yogyakarta of Indonesia
Degree in Electronics and Instrumentations (Bachelor of Science)

EMPLOYMENT HISTORY
December 2, 2005-December 30, 2005
Batam Piping Training Center
100 Hours Intensive Piping Training
1. 60 hours Piping Class
* Piping Materials
* Welding Fittings and Flanges
* Piping Measuring
* Piping Formulas
* Isometric
* Pipe Plan
* P & ID
2. 40 hours Workshop
* Materials
* Pipe Fittings
* Fabrication & Erection

August 2005-Now
PT. Sanmina-SCI Batam
Last Title: Test Engineer
Responsible:Report to Test Engineering Manager
* In-charge of launching new products
* Continuously improving in-circuit and functional test yields
* Develop fixtures suitable for volume production to complement the functional test equipment supplied by customer
* Handle product testing
* Implement and modify test program
* Perform products failure analysis
* Dealing with customer on product issue
* Handle product transfer from customer
Product: GPS receiver and module

February 2003-August 2005
PT. Plexus Manufacturing Indonesia
Last Title: Test Engineer
Responsible:
* Report to Test Engineering Manager
* Supervise and organize Test/Debug EA & Technicians
* Set-up & maintenance Tester equipment, ICT (HP 3070) and FCT, Hardware and
Software
* Handle product testing issue
* Implement and modify test program
* In-charge in debug team for all product
* Dealing with customer on product issue
* Handle product transfer from customer
Product: WD, Maxtor HD, AGP card

January 2002-February 2003
PT. Solectron Technology Indonesia
Last Title: Test Engineer
Responsible:
* Report to Test Engineering Manager
* Lead group of debug technicians for ICT&FCT
* Set-up FCT equipment
* Trouble shooting failed PCBA from ICT&FCT tester
* Provide debug data for quality improvement
* Failure Analysis the root cause for high fall-out/rejected PCBA in production line for immediately feedback and further decision
* Set-up, Maintenance and Trouble Shooting FCT Debug Station
* Failure Analysis for root cause of problem whether PCBA problem, fixture problem or software problem
* Work with team for Set-up new product, feedback for all new product problem
Product: Apple "Macintosh" Motherboard
Various Product

October 2000-October 2001
Flairis Advanced Manufacturing Pte Ltd Singapore
Last Title: Test EA
Responsible:
* Report to Test Engineering Manager
* Trouble shooting failed PCBA from ICT&FCT tester
* Set-up, Maintenance and Trouble shooting FCT Tester
* Carry out Failure Analysis on PCBA level and components
* Failure Analysis on new product, current product and Customer Return
* Evaluation of hardware and software problems that arises during production run of the product
* Provide technical support to the line
* Trained to setup maintain and fine-tuning test software on the In-Circuit
Testers as well as Functional Testers (ATE)
* Work with Product Engineer to perform Failure Analysis during new product transfer (pilot run)
* Supervise and train technical operator and OJT student
Product: Video Display card, Sound card, Burn-in test Motherboard
CD Recorder, Various product

May 1998-October 2000
PT. Natsteel Electronics Batam
Last Title: Test Engineer
Responsible:
* Report to Test Engineering Manager
* Lead group of debug technicians for ICT&FCT
* Set-up FCT equipment
* Carry out Failure Analysis on PCBA level and components
* Carry out complete test evaluation on In-Circuit Testers as well as Functional
Testers (ATE) on rejected QA sampling
* Trouble shooting failed PCBA from ICT&FCT tester
* Perform Run-In Test for product reliability test
* Provide debug data for quality improvement
* Failure Analysis the root cause for high fall-out/rejected PCBA in production line for immediately feedback and further decision
* Set-up, Maintenance and Trouble Shooting FCT Debug Station
* Failure Analysis for root cause of problem whether PCBA problem, fixture problem or software problem
* Work with team for Set-up new product, feedback for all new product problem
Product: Apple "Macintosh" Motherboard
Compaq Motherboard
Set Top Box
Various Product

December 1996-April 1998
Own business in computer course

SKILL
* MS Windows
* MS Office
* Windows NT
* Macintosh OS
* UNIX
* Assembler
* CAD

TRAINING
* Basic Industrial Engineering at PT. NatSteel Electronics Indonesia (In house Training)
* ESD (Electro Static Discharge) at PT. NatSteel Electronics Indonesia (In house Training)
* House keeping 5-S Workshop at PT. NatSteel Electronics Indonesia (In house Training)
* ISO 9002 at PT. NatSteel Electronics Indonesia (In house Training)
* ISO 14001 at PT. NatSteel Electronics Indonesia (In house Training)
* HP 3070 Basic Operation at Flairis Advanced Manufacturing Pt Ltd Singapore (In House Training)
* Gen Rad Basic Operation at Flairis Advanced Manufacturing Pt Ltd Singapore (In House Training)

AREA OF EXPERTISE
* Failure Analysis/Trouble shooting down to component level
* Supervise and organize sub ordinate
* Strong leadership and willingness to work hard
* Work and shift scheduling
* Collect and compile data
* Generate and publish FA report
* Dealing with customers and vendors on quality issue
* Publish debug finding and feedback corrective action for yield improvement
* Familiar with ATE test system
* Macintosh hardware and software experienced
* High soldering/rework skill
* Reading schematic drawing, BOM
* Generate and publish debug procedures
* Documentation on Test Procedures, BOM, Schematic Drawing
* Familiar with lab and measuring equipment
* BGA failure verification
* PCB problem verification
* Reliable to operate computer software IBM PC Compatible like:
Windows System 95/98 and 2000, Microsoft office, Mailer, Internet Browser, etc.
* Reliable to operate computer software APPLE Macintosh like:
Mac OS 9, Microsoft Office, Adobe Photoshop, Mailer, Internet Browser, etc.
* Reliable to install and setup computer hardware both IBM PC Compatible and Apple Macintosh.
* Familiar with LAN base on Microsoft Network and Mac OS 9.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 6411)

Go to Search Parameters...

Brief Description

Assistant rig mechanic-roughneck-welder co2-assemble-repaire and maintence mechanical equipment and etc-cnc punch operator -plumbing-work shop manager-cutter steel- technical worker.

PDS Piping Designer, Diploma in Mechanical Engineering

A self motivated, highly qualified, multi-disciplined Engineer with recent in-depth experience in the Oil and Gas Industry.

Generation of piping isometric from PDMS 3D modeling software.

USING SPOOLGEN SOFTWARE MAKING SPOOLS AND ERECTION DRAWINGS AND CHECKING THE DRAWINGS. SUPERVISION AND QUALITY CONTROL ON FABRICATION OF TEMPORARY PIPE LINES AND FITTINGS AND OPERATION OF CHEMICAL CLEANING PROCESS.

Experience: 5+ Years of experience in analysis & design of structures related to oil & gas, petrochemicals, refinery, and material handling for industrial projects.

Scaffold supervisor

I am an experienced Electrical and Electronic Engineer with an HND degree in 1994. I also hold a certificate in woodward engine controls in 2003 in Holland.

More than 10 years in construction supervision, including accurate takeoffs, estimating, budgeting, purchasing, and invoicing.

More than 7 years experience in the management, design, and development of commercial geo-science software applications in PetroChina using C, Motif, X-Windows and Fortran environments under the UNIX platform; VC++, VB, and Matlab in Windows; and involved in researching and developing advanced tec

Experienced DCS engineer with exposure in Oil & Gas, Chemical, Petrochemical and Power Industries.

Marine Hull Structural Design

Naval Architect with 2 years of experience in desing of various ships especially bulk carriers. Advanced knowledge in Napa and Class softwares

I have been working at EPCI company as construction engineer and have experiences on design appraisal of fixed offshore structure.

Highly Talented electronic engineer with experience in Field service, Electro electrosubmersible pumps and speed drives including gcs ics and speedstar. Well developed and analytical "trouble shooting" skills with Excellent interpersonal and communication skills.

I am very interested to discuss possible opportunities within your organization. I think my background and experiences enable me to quickly adapt and help any corporation. My resume is enclosed for your review.

P.G Diploma in Industrial Automation System Design , B.Tech. in E & I

I’m a young piping engineer looking for new challenges in my career, I have worked with some of the more important piping design software, and I’m looking for an opportunity in a foreign country to learn more of their process and to apply my acquired knowledge of +2 years with KBR MEC.

Over 37 years of experience in experience in Nuclear, Steel and Fertilizer industries in various capacities as operator, Shift engineer, Sr. Shift Engineer, Manager and Sr.Manager in the following areas. Utilities and offsites plants , Process and Product handling pla

B. Tech. Chemical Engineering with over 2.3 years experience in PIPING DESIGN ENGINEER „«Currently designated as PIPING DESIGN ENGINEER, PDS/PDMS with IMPaC, Mumbai, India

CNC Programming, Auto CAD, CNC Machine Operating,

Planning, scheduling and coordination of major projects and maintenance works in the Oil and Gas Industry

Strong analytical and quantitative/problem solving skills. Excellent inter-personal communication skills and comprehensive knowledge of computer programming (vb, SQL, C++). Experienced in research in Petroleum Engineering, Geothermal and Chemical Engg. Administered Web sites, designed databases.

Chemical process engineer with graduate education and five years of experience in the oil and gas industry. Project manager and leading specialist in process design, scale-up and modelling. International exposure through collaborative R&D projects with commercial and development partners overseas.

Draftsman first, Millwright, always!

I'm employee in Jordan Petroleum Refinery Co, I am working in main work shops as technical " ability design & fabricate all kinds of gears As helical, bevel, spur & worm gear" , ability using lathe machine & other production machine.

More than 11 years of working experience in Petrochemical and Paper Industry in various positions and discipline

I am a drilling engineer, I develop, plan, cost, schedule and supervise all stages of well-drilling from the initial well design to testing, completion and abandonment. My Typical work activities include: designing; undertaking casing design; drawing up the drilling programme.

Reservoir Engineer with 10 years experience. From 1993 to 2000 I worked in SOCAR(Guneshli project with BP-AMOCO & TotalFina using IRAP RMS and OFM, Eclipse). From 2000 to 2001 in Karasu Operating Company as reservoir engineer. From 2001 I am working in Schlumberger as reservoir engineer.

Graduate Mechanical Engineer+ SAP AG MM certified consultant 11 years of experience in a leading Chemical Fertilizer industry as Piping erection / Project, Maintenance and Materials Engineer

Mechanical Engineer,17 years experience in: Piping Design,Sup. Construction, Pre-commissioning and start up for Deshydrat. crude oil/Gas Plant; Surface/on land Facility Engineer. Handle of norms Ansi/Asme/Api. Hydrostatic and Welding Test. Aws Member.

Master of Science degree in Petroleum Engineering from Texas A&M University and Bachelor of Science degree in Mechanical Engineering from Universidad de Oriente (Venezuela) with over seven years of experience in a major oil/gas company.

Geoscientist with 8 years of experience working in different phases of exploration, delineation and development projects in Venezuela onshore and offshore areas with a major oil company. Master degree in geophysics from Stanford University. Effective communication skills in English and Spanish.

Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -

Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.

Operate as part of a team of engineers in carrying out detailed engineering works and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

Process modelling using "ASPEN HYSYS" & PIPING ENGINEERING COURSE

ELECTRICAL TECHNOLOGIST/SUPERVISOR with proven leadership skills, vast experience in the chemical, Power and Research and Development industry. Worked for WATER AND POWER DEVELOPMENT AUTHORITY, ENGRO CHEMICALS PAKISTAN LTD AND SUPARCO. Examples of the plants and situations I have handled include, P

Seeking a petroleum engineering position where I can apply my analytical skills as part of a multidiscipline team to yield results and grow

Mechanical Design Engineer

Engineer with a scientific base, high analysis capacity, and development of projects guided to the exploration, drilling and development of oil fields in order to exploit our resources

HSE officer + + 3 Yr Exp. + B.E. + DIS, Work experience in Emergency Handling at various occupancies, Chemical Plant safety, Petrochemical Fire & safety, Plant Construction project, Natural Gas Pipeline Project & O&M Health safety Environment expertise Experience.

2001 to 2004 working at Smiti International Gulf Services (OMAN) as a Drilling Tubullars Inspector. 2004 - Cuurently working at MB Petroleum Servics as Completion Field supervisor

Process Design Engineer with 3 yrs exp.Basically a BTech Petrochemical Engineer,versed with Aspen Hysys,Flarenet,Aspen Plus,Process calculation worked for International FEED & Detailed Engineering projects

My objective is to become an employee who is committed to contributing to professional/career excellence. Being an individual who is given to continuous learning and development, I am always willing to harness from my skill pool, experience, and specialized area of training; to be the best I can

Instrument&control engineer (DCS,PLC) oil & gas field

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out