Resume - Hi I am an engineer with instrumentation as specility and also i have don 3 yea...

Misco Jobs

Resume #62919

CONTACT INFORMATION:
View contact information...

ELECTRICAL & INSTRUMENTATION ENGINEER

CARRIER OBJECTIVE

To be apart of successful team of individuals who thrive on challenges, Where in my skills and ability will enhance the company's success and there by my own growth, and to be an efficient professional. Have a strong inter personal and communication skill and a quick learner.

TECHNICAL QUALIFICATION

* B.E. in Instrumentation technology from Visveshwaraiah Technological University, Karnataka INDIA (4 Year regular course)

* Diploma in Electrical Engineering from Board of Technical Examination Bangalore, Karnataka India ( 3 year Regular course)

* Diploma in PLC Programming from DGE Ministry Of Labour Government Of India

WORK EXPERIENCE TOTAL 7 YEAR ( INCLUDING 2 YEAR IN GULF)

More than seven year of experience in various Electrical / Instrumentation & Telecom installation, Inspection, Quality control & coordination, supervision, Instrumentation and control, preparation of start-up,procedure,manual preparation in the Kingdom of Saudi Arabia and India

EXPERIENCE-NO: 1
Presently working at ACC Wadi Gulbarga as maintenance engineer (instrumentation).

EXPERIENCE-NO: 2

NAME OF THE COMPANY: SAUDIA ARAMCO / YANBU REFINERY

Name of the contractor: T.R.G. SPAIN

Project: DHT OF YANBU Refinery K.S.A

Designation: Q.C.(Instrumentation/elect)
Approved by saudia aramco period: 1 year (April 2005-APRIL 2006)

Nature of work:-
1.Coordination of all QC Inspection, scheduling the inspection activities pre-commissioning and commissioning according to the plans and Quality standards/procedure.
2.provide guidelines and instruction to the E&I team of Engineer to work according to the P&ID.
3.Inspection, supervision, erection of the process field instrument pre-commissioning according to the specified specification data sheet and P&ID.
4.Instuction, direction and guidelines to the calibration team to perform calibration of electronics and pneumatic instruments.
5.coordination with DCS vendor for making the logic of the plant.
6.Involved in the commissioning of the instruments and DCS, loop checking from field to the control room, signal checking of all
Instrument which is coming from DCS control room, group checking and its testing of instruments like pressure temperature, level flow transmitter, control valve and other visual instruments.
7.Involved in the QC inspection of the transformers, electrical substation, DCS,UPS, MCC's Bus-duct, panels, interior & exterior light, JBs, distribution trays, organizing calibration shop to carry out pre-installation calibration of instruments with proper test equipment having traceability of its accuracy coordinating
QC Department and client for day to day loop check, planning of pre-loop check, rectification of any loop having problem, training of technician to carry out effective loop check.

EXPERIENCE-NO: 2

NAME OF THE COMPANY: OIL & NATURAL GAS COMMISSION (O.N.G.C)

Name of the contractor: Sadhav offshore company andheri(W),Mumbai

Designation: Maintenance Engineer

Period: 2 year (from oct 2002 to oct 2004)

Nature of Work: -

1.Maintenance of telemetry and SCADA system and been worked on project temperature transmitter and Sensor (RTD) installation.
Have hand on experience of installation and calibration and trouble shooting of various transmitters viz, temperature(TT)pressure(PT)
differential pressure(DPT ),flow meter, totalizer. pneumatic controller,bordon's chart recorder of ROSEMOUNT smart series.

The SCADA system is divided into following three sections.

I - Telemetry and instrumentation section

1.Checking the status of RTU(remote telemetry unit).carrying out the preventive maintenance which involve at least following broad activities however the preventive maintenance shall cover all other activities which is not listed below but to make the RTU &
SCADA system fully operational with the help of test equipment and ensuring the RTU's proper grounding.
A.Checking and adjustment of power supply voltage
B.Checking digital input corresponding to the master unit
C.Checking analog input value with the help of test Equipment and ensuring proper RTU grounding.
2.Checking the TIJB for physical cable connection, checking status of zener barrier taking corrective /remedial action for proper function of telemetry system
3.Loop testing at TIJB towards field instrumentation side.
4.Checking the FJB for physical cable connection and taking corrective Action for the function of telemetry system.
5.Monitoring and checking status of following instruments(a set of instrument and in case of malfunctioning /nonfunctioning taking corrective action to make them operational (TT, PT, DPT, FT, SSV,
SSV, PS).
6.Checking status of PT (point/tubing and taking corrective action for monitoring proper previous value.)
7.Physical checking of solenoid valve for normal operation during remote well control testing and carry out corrective action incase of non functioning.
8. Calibration of TT, PT DFT, FT, DPT, pressure switches.

II- power system section

1.Measurement of voltages and charge current and taking corrective action for the optimum current level of solar panels.
2.checking the voltage across the SPV panel, charge controller and battery cell.
3.checking the status of the battery charger and charge controller measurement of voltage and current taking remedial action for the rectification /trouble shooting of module PCB.
4.checking voltage of battery/battery bank level and specific gravity of the electrolyte where ever required measurement of circuit voltage and charging current.
5.Checking status of TEG, checking voltage /load current checking output voltages of each module, checking air filter regulator and draining condensate, checking and adjusting fuel gas supply.

III-communication section
1.Checking of antenna structure, feed RG213 /RF cable of connection mounting accessories and rectification of problem for full function process platform.
2.Alignment of antenna/adjustment of RF signals for the optimum level with proper test equipment, for remote & process platform.
3.Preventive maintenance of Radio, checking of voltages and Tx/Rx level signal level &adjustment to optimum level through TTS remote.
4.Physical checking of Radio equipment (remote),checking power supply voltage of Radio, setting of power supply physical checking of Radio grounding, realignment of antenna (remote).

EXPERIENCE-NO:3

NAME OF THE COMPANY: AL-FAWASAL ELECTRICAL EST (K.S.A)

Designation: Electrical Engineer

Period: 1 YEAR (Feb 1997 to jan1998)

Nature of work: -
1.Review of electrical drawings & make the connections as Per circuit diagram such as the control wiring of motor Control center
(MCC), ATS, synchronizing panel, street Light panels etc.by using electrical switchgears like Contactors ranging from 5A to 400A
rated current and coil Voltage of 110/220/24 V ac/dc and relays such as O/L,U/V,O/V relays with N/O & N/C Contacts, timers like 24
hrs ON delay, Off delay. circuit breaker like MCB &MCCB Ranging from 63A AND 25A to 600A respectively ACB ranging from 800A to
4000A with shunt trip release Under voltage release, ELCB ranging from 0.3A to 30ma Leakage current
2.To make the connection for CT operated amp-meter Voltmeter,
Frequency meter, power factor meter energy Meter etc.
3.To make the copper buss bar as per the drawing by using Hydraulic bending machine & assembling of all equipment To make the panel.
4.To install and commission the panel at site& termination of the incoming cable by using the hydraulic crimpier.
5.Have Experience to handle the electrical switchgear of Following
MNc's Merlin gerin ),Telemechnique (France),Legrand (France),ELDON
(Spain),Omron (Japan),Siemens(Germany)

EXPERIENCE-NO: 4

NAME OF THE COMPANY: GYRO LAB (P) LTD MUMBAI-93

An Swiss collaborated company (landes&gyro) manufacturer of instrument transformer,I&3 phase meter testing benches, megger and various electrical testing equipments for various state electricity boards and L&T,ABB etc

Designation: production and Testing Engineer

Period: 3 Years (December1993-Jan1997)

Nature of work: -

production duties
1.Manpower co-ordination & control
2.To solve the technical and non technical problem evolved on different department viz moulding, fabrication assembling.
3.Looking after daily production.
4.Data entries of daily production.
5.Co-ordination with store, quality assurance dept,for continuous availability of material of different dept.
Testing duties
1.To carry out the testing at various stages.
2.Core testing before and after secondary winding is laid for
Ratio and Error test.
3.Moulded core of instrument transformer testing for Ratio& Error
HV test between cores and insulation test Between windings.
4.To carry out following final test before client inspection.
* Ratio & Error test * LV test * HV test * pressure test.
5.To prepare the test report.
6.Other than this to lead a team of technicians for the Erection and commissioning of instrument transformer at client's site.
7.Testing of meter testing benches repair &trouble shooting Of various testing Equipments &meters.

QUALIFICATION IN INFORMATION TECHNOLOGY

* C & C++ Programming languages
Microprocessor (8085/86) and Microcontroller (8051 /pic) programming
* Diploma with Grade A+ in Hardware And Networking Engineering From Accel IT Academy LCC Hyderabad.
Windows NT-4.0/5.0 Server
Windows NT-4.0 Workstation
Windows 2000 Professional
* Diploma In Programming From L.C.C Hyd In Following
Oracle 9i
Visual Basic 6.0

PERSONAL INFORMATION
* Date of birth: June 21, 1974
* Nationality: Indian
* Passport no: E-5471333
* Passport Validity: 22/07/2013 years
Place Of Issue: Bangalore place:

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6541)

Go to Search Parameters...

Brief Description

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out