Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #63118 next resume »» CONTACT INFORMATION: View contact information... OBJECTIVE: To acquire position of Production Stimulation/ Reservoir Stimulation EXPERIENCE Schlumberger, Well Production Services (WPS), Wyoming, USA 2006-Aug-07 Field Engineer, Implementing stimulation design in tight gas wells, Wyoming Hydraulic Fracturing, Foaming agents (CO2, Nitrogen) and Matrix acidizing West Virginia University, Department of Petroleum and Natural Gas WV, USA 2005-2006 Research Assistance, Artificial lifting (Application of CFD modeling in Hydrocyclone Down-hole oil-water separation) Ocular Science, Southampton, England, UK 2002-2004 Quality Assurance, worked with preparations, inspection and testing of contact lenses Neste Engineering, Porvoo, Finland 2000-2001 Process Engineer, Equipment design in Porvoo refinery (Finland) mainly Designing Multiphase Separator and related Equipment, I was also involve removing salt from crude oil (desalting processing in the refinery) Savcor, Mikhail, Finland 1999- 2000 Corrosion research Engineer: corrosion protection and monitoring in Oil and gas pipelines & HPS (cathodic Protection and online monitoring).Investigating how some facility in Dan Filed can be protected and monitor on line Dan Field, North Sea, Denmark 1998-99 Production Design: Designing alternative solutions of how equipment can cope in the event of production increase: Designing Multiphase Separators (Horizontal, and vertical), setting level controllers, alarms, pumping and instrumentation devices EDUCATION West Virginia University, Masters in Engineering: Petroleum and Natural Gas 2006 Concentration: Drilling and Completion, Reservoir Stimulation, Formation Evaluation, Production Engineering GPA: 3:70 Aalborg University, Aalborg, Denmark Master of Science in Engineering Oil and Gas Technology (Offshore) 98-00 Major Production and process design Mikkeli Institute of Technology, Mikkeli, Finland 94-98 Bachelor of Engineering in Industrial Engineering Oxford Brookes University, England, UK 95-96 Exchange student, School of Engineering (Electronics) SKILLS: Fracturing Design, Fracturing Fluid, FracCat, FracCade, SCADA, Software Development, Eclipse, Computational Fluid Dynamics (CFD), Spreadsheets, Statistical Analysis, Microsoft Word and PowerPoint Reservoir Stimulation (Matrix Acidizing and Fracturing), Well bore cleaning Formation Evaluation & interpretation (LWD, log & core analysis), Reservoir development (Performance prediction, history matching, Well-testing and Secondary recovery) Certificates: Completed Norwegian offshore safety and survival training. HS2 Training Membership: SPE REFFERENCES: References, credentials and additional information available View contact information... «« previous resume next resume »» Search Results (Resumes 1901 to 1950 of 6545) Go to Search Parameters... Brief Description I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects. To become a successful Planning Professional in a professionally managed Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction. Nobody has climbed up through the steps of success with his hands in his pockets. involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites. Piping design, PDMS modelling (design,darft ,iso draft) 6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS. Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000. Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC Over 24 years professional experience IT, SAP SECURITY, SAP IS-H* Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion. EXPERIENCE PIPELINE ENGINEER Engaged in Engineering and design services for Hydrocarbon Processing Industry fpso, subsea, structural, naval, project management, marine, risk management Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems. I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision. BE Mechanical Engineer with 5 years experience in Piping Stress Analysis Experienced exploration / production geophysicist and geologist with major Exploration Companies To acquire position of Production Stimulation/ Reservoir Stimulation Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following: Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance. Broadening experience leading to Project Manager and Executive/Board Level opportunities. Electrical and Instrument Technician, 20 years international experience. Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint) An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS. Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance. I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University. Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks. Multi disciplinary engineer Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems 3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere. Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants. I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels. Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction. Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K. Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities. Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems -20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields. I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries. Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials. Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair. Application for the post of Electrical Supervisor 25 years of experience in Production, Drilling, training and administration and costs control Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining To work Overseas First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   [ 39 ]   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com