Resume - As Instrumentation Inspector/supervisor fully involved in construction,precommi...

Misco Jobs

Resume #63219

CONTACT INFORMATION:
View contact information...

Position: Instrumentation QA/QC Inspector/Supervisor

Educational Attainment:

1- Apprenticeship in Industrial Instrumentation & Process Control
In 1997 From NFC Institute IET Multan.

2-F.SC (Pre-Engineering) Session 1993-1995

Permanent Address:
Basti Rahim Shah
P.O.BOX & Tehsil Jahanian District Khanewal
PAKISTAN

Nationality: Pakistani

Date Of Birth: 02/22/1976

Marital Status: Married

Training Seminars / Workshop Attended:
* ISO 9001-2000 TRAINING
* SAP TRAINING
* COMPASS TRAINING

Employment Records:

1)Company PETRO- RABIGH
A Joint Venture Company By Sumitomo
Chemical co.Ltd.(Japan) & Saudi Arabian Oil Co.
(Saudi Aramco)

Location Saudi Arabia

Position INSTRUMENTATION QA/QC INSPECTOR/SUPERVISOR
Inclusive Date March 28, 2007 To Up to date.

DUTIES & RESPONSIBILITIES

Review plans and drawings in accordance with specifications, codes and standards. Familiar with the International industry codes and standards related to intrinsically safe systems and electrical systems for Instrumentation such as; NFPA 70/NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC 60529,IEEE518, IEEE1100, ANSI MC 96.1, ISA RP12.6, ISA RP 12.2.02
* Conduct activities and inspection in accordance to Project Quality Assurance Manual and Quality Control Inspection Plan.
* Monitor daily discipline activities and verifies compliance to project procedures, specifications and standards. Identify quality problems, reject non-conforming items and initiate, recommend or provide solutions to the problems with customer sanction / approvals through designated channels.
* As Per International & Saudi Aramco Standards, Specifications, Instrument Calibration Method of Statement & As Per Approved Project Drawings Supervised, Inspected & Witnessed calibration workshop,DCS Cabinets frame insideRIB'S, Instrument Cable Duct Bank, Cable Pulling from RIB to J.B & Control Room and RGS conduit, Stanchion of instrument devices, Marshalling Panel, Junction Boxes installation, Mounting of instrument devices.
* Anything not as per Standards or Specification then Making Surveillance or Non Conformance Reports
* Carried out daily job activities after receiving RFI(Request for inspection) from contractor

2)Company Jubail United Petrochemical Co.(JUPC)
by Sabic and Flour Danial

Location Saudi Arabia
Position INSTRUMENT INSPECTOR
Inclusive Date April 21, 2004 To December 05, 2006

DUTIES & RESPONSIBILITIES

* Review plans and drawings in accordance with specifications, codes and standards. Conduct activities and inspection in accordance to Project Quality Assurance Manual and Quality Control Inspection Plan. Monitor daily discipline activities and verifies compliance to project procedures, specifications and standards. Identify quality problems, reject non-conforming items and initiate, recommend or provide solutions to the problems with customer sanction / approvals through designated channels. Control further processing of non-conforming items, deficiencies or unsatisfactory conditions until rectification and any remedial action is approved. Conduct random surveillance on operator's qualifications, tools and equipment, working practices as well as storage and preservations. Prepare daily inspection documents and final acceptance documents prior to project completion. Maintain close working relationship with the construction personnel.

* As Per Sabic Standards, Specifications, Instrument Calibration Method of Statement & As Per Approved Project Drawings Supervised, Inspected & Witnessed Instrument Cable Duct Bank, Cable Pulling from RIB to J.B & Control Room and RGS conduit, Stanchion of instrument devices, Marshalling Panel, Junction Boxes installation, Mounting of instrument devices such as pressure, level, temperature transmitter, RTD and thermocouple, pressure, Level, Flow and temperature switch & Control valves. Calibration of Transmitters, Control valves, Switches of all Parameters Like pressure, Level, temperature, Flow
* Involved in FAT(Factory acceptance test) & SAT(Site acceptance test) Activities
* Inspection & Witness of cable megger & continuity test before Terminating Cable & then Cable Termination Check to verify exact termination point of each cable core as per Approved wiring Drawing, Core Marker & tightness of cable
* Anything not as per Standards or Specification then Making Surveillance or Non Conformance Reports
* Carried out daily job activities after receiving RFI(Request for inspection) from contractor
* Work for loop checking, Interlock check, P & ID, ILD, Data Sheet
* Prepared Punch list for the activities carried out by construction group
* Work on Pre & Final turnover punching System
* Inspection of Instrument Calibration Shop, Test equipment as per SABIC Standard

3)COMPANY Millac Foods Private Limited
Pakistan

POSITION INSTRUMENT SUPERVIOSR
INCLUSIVE DATE NOV 30,2002 ~ Apri10, 2004

Duties & Responsibilities:

Supervise field construction project related to instrumentation. Responsible for the preparation of instrument, take off material and drawing needed in the project. Installation of cable tray, conduit, ImpulseTubing and Instrument air line. Responsible for Installation & calibration of instrument, loop-checking, megger and continuity testing of cable. Supervise termination of primary/secondary cable and PLC panel and junction box.

4) COMPANY Jubail Petrochemical company Kemya
(Joint Venture of Sabic & Exxon)
LOCATION Saudi Arabia
POSITION INSTRUMENT QA/QC INSPECTOR
INCLUSIVE DATE August 18, 2000 To August 25, 2002

:
DUTIES & RESPONSIBILITIES

* Witnessed Calibration of instrument like pressure, level, temperature, pressure switch, temperature switch control valves I/P converters, limit switch solenoid valves.
* Inspection of cable tray installation and conduit, Fabricated support of instrument devices and electrical equipments alignment of panel, marshalling box, mounting of instrument devices such as pressure, level, temperature transmitter, RTD and thermocouple pressure switch and temperature switch. Cable pulling from control room to J.B then from J.B to Field Instruments.
* Supervise termination of instrument Cable in junction box, marshalling panel
* Impulse line test pressure
* Assist in plant commissioning works, loop checking, Interlock check, P & ID, ILD, and punch list works
* Preparation of Loop folders
* Modification jobs

5) Company: PAK-AMERICAN FERTILIZERS LTD. (TOYO ENGG. PROJECT)
Position: INSTRUMENT QA/QC INSPECTOR
Inclusive Date: OCT 02, 1997 ~ AUGUST 15, 2000

I WORKED AS QA/QC INSPECTOR & INSTRUMENT TECHNICIAN IN ERRECTION,COMMISSIONING,START-UP AND MAINTENANCE
AT PAK-AMMERICAN FERTILIZER LIMITED PAKISTAN
PAK AMMERICAN FERTILIZER LTD. IT IS ONE OF THE PIONEER FERTILIZER UNITS OF NFC.INITIALLY IN THIS UNIT AMMONIUM SULPHATE WAS PRODUCED. LATER ON IT STARTED A MODERNIZATION & EXPANSION PROJECT OF 600/1050 MTPD AMMONIA /UREA (A PROJECT OF M/S TOYO ENGINEERING CORPORATION OF JAPAN).THE KELLOG/ACES PROCESS HAVING LATES TOTAL DISTRIBUTION CONTROL SYSTEM (TDC3000-X) WHICH CONTAINS APM FOR HIGH LEVEL CALCULATION & ADVANCED CONTROL STRATEGIES.LM FOR INTERLOCKING.HM FOR SYSTEM DATA STORAGE, PROCESS HISTORY,GPRAPHIC DISPLAY,AND CONFIGURATION INFORMATION.THE PLANT IS ALSO EQUIPED WITH HI-TECH CENTRIFUGAL COMPRESSORS WITH LATEST PROGRAMED ELECTRONICS GOVERNING CONTROL SYSTEM FOR EXTRACTION/CONDENSING TURBINES WITH COMPLETE INTERLOCKING FOR SAFE OPERATION
Duties & Responsibilities:
* CALIBRATION & MAINTENANCE OF ALL TYPE OF ELECTRONIC & PNEUMATIC INSTRUMENTS.
* REPAIR & MAINTAIN ALL TYPE OF PRESSURE, LEVEL, FLOW, TEMP. ETC.SMART TRANSMITTERS
* WORKING EXPERIENCE ON DIFFERENT MANUFACTURER'S TRANSMITTERS LIKE HONEYWELL,ROSEMOUNT,FISHER, YOKOGAWA & FOXBORO ETC
* WORKED ON ULTRASONIC FLOWMETER XMT868(PANAMETRICS)
* WORKED ON MAGNETIC FLOWMETER OF YOKOGAWA MODEL AE 100,200 & 300
* WORKED ON VORTEX FLOWMETER MODEL DY,DYA OF YOKOGAWA
* WORKED ON MICROMOTION(EMERSON) FLOW TRANSMITTERS
* RADAR TYPE LEVEL TRANSMITTER (VEGAPULSE 56K,44,42)
* WORK ONCONTROL VALVES OF NELES,MASONEILAN,FISHER,VALTEK
* WORKED ON FIELDVUE DVC 6000 SERIES DIGITAL VALVE CONTROLLER(FISHER)
* CHECK & CALIBRATE MOTORIZED VALVE(LIMITORQUE & ROTORK)
* CALIBRATION & MAINTENANCE OF THERMOCOUPLE & RTD'S
* CALIBRATE PRESSURE,LEVEL & TEMPERATURE SWITCHES
* CALIBRATE PRESSURE & TEMPERATURE GAUGES
* INTERNAL LOOP CHECK OF DI, AI, AO POINTS IN CONTROL ROOM
* TROUBLE SHOOTING OF VIBRATION MONITORING SYSTEM OF TURBINE & COMPRESSOR (BENTLY & NEVADA 3300,3500, 7200)
* CHECK INTERLOCKING
* TROUBLE SHOOTING, FAULT FINDING ON PROGRAMMABLE LOGIC CONTROLLER (PLC)& PESS(PROGRAMMABLE ELECTRONIC SAFETY SYSTEM)
* TROUBLING SHOOTING & FAULT FINDING EXPERIENCE ON DCS e.g. TDC 3000X HONEYWELL & YOKOGAWA CENTUM CS 3000
* LOOP TEST OF ALL KINDS OF ELECTRONIC & PNEUMATIC CONTROL LOOPS.
* CARRIED OUT PREVENTIVE MAINTENANCE JOB AS PER PROCEDURES
* TO MAKE CHANGES IN MAINTENANCE PROCEDURES & WORK INSTRUCTION

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2851 to 2900 of 6411)

Go to Search Parameters...

Brief Description

I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.

seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units

Experienced mud engineer

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

A system engineer with more than ten years experience in process control and oil field development and implementation.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

Seven years experience.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Computer literate, Windows 98, MS Word, MS Excel, Powerpoint, Autocad 2D and 3D 2008 w/ color rendering

Water/wastewater Treatment, Hydraulic & Hydrologic Model

To pursue a challenging career and to put forth the best of my knowledge towards chemical process and engineering procurement industries.Also can do hardwork and be motivative towards the job undertaken

1 1/2 years as Jr Drilling Fluids Engineer, 15 years as water analysis, 5 years distillation.

Cable laying as per drawing

Engineering design of pipelines for natural gas transportation and production systems; evaluation of piping systems, development of piping material specifications, design of metering and regulation stations. Detailed design engineering using CAD.

Piping Engineer

Hydrogen Manufacturing, reformer, psa

Eight (8) years of very sound technical proficiency as a Piping Designer / CAD Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Offshore Platforms, Jackets & Process Equipments, Cross Country Pipelines including pumping stations & Water treatment Plants & Environmental Projects

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

Directional Driller

Instrumentation Graduate with hands on exposure in PLC programming and commisioning of PLC based Systems espescially,GE Fanuc,AllenBradelly,Beckener & Rainer (B&R).Hands on experience in Yokogawa DCS-CS 3000,System Engineering.

Stimulation Engieer

basic operation on CNC, Troubleshooting equipment Tools

Stratigraphy, sedimentology and depositional environments.

Process engineer with 3 years hands-on experience for Reliance Industries Limited India.

I have passed Diploma in Electrical and Electronics Engineering. Totally I have 12 years Experience in oil and Gas company and others.

Having three years of experience in the field of process engineering, B.E, Chemical

I am a Electrical supervisor in voltas company Abudhabi (UAE), in my concern it Shiek khalifa medical city for Electrical supervisor since past 2 years,and since before to still 9 years experience i had,7 years in india expererience and 2 years gulf experiece, i need Australia Goverment Job

PCS 7, TDC, C++, SQL,ORACLE 9i, WinCC,HMI

Responsible for actively involvement in the pre-commissioning and commissioning of the worlds largest natural gas plant

As Instrumentation Inspector/supervisor fully involved in construction,precommissioning,commissioning,start-up activities

Extremely motivated qualified geologist relishing new and dynamic challenges with a leadership role if required in a team or independently to achieve personal and company targets. Broad overseas experiences having worked in SE Asia and Europe and well-developed communication skills.

Master Technician (Mechanical)

Corrosion, Lab, Chemist, Oil & Gas

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

First Prev 51 52 53 54 55 56 57 [ 58 ] 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out