Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #63350 next resume »»
CONTACT INFORMATION:
View contact information...

Objective: Full time job with good payment.

Qualifications
Experienced as a Senior Drilling Fluids Engineer from 1997 till 2006
-Certified (CPI -Canadian Petroleum Institute- basic and advanced
Mud School)
-Practically (In areas of Egypt, Saudi Arabia, Yemen)
-Been through
Attitude High stamina.
(People from all over the world with different cultural and behavioral background were experienced ).
Environment (Heavy snowy rain, heat up to 55 C, winds, storms, cold down to 0 C …).
Well types (vertical, horizontal, short radius, multi-lateral, work over operations)
Depths (7000 ft – 18000 ft or equivalent)
Weights Range (7.6 ppg – 20.5 ppg).
Contaminants (Co2 reached 4%, H2S 200-6000 PPM, Salt water, Cement, Severe bacterial effect, Oil, Mud making and sloughing shale, Solids, High BHT
…).
Mud Types (not exclusively from spud mud to drill in fluids passing through KCl polymer, L.S.N.D., OBM, Emulsion, clay free, gypsum, salt saturated, air foam, PHPA polymer system …).
Completion (most brine types up to weight 14.9 ppg, diesel inhibited and none, pickling, acid jobs, mudzyme brine …).
Kicks Pressure Ranges (200-3000 PSI).
Losses (5 PPH-complete loss-blind drilling).
Operations (Drilling, Milling, fishing, Killing, coil tubing, Snubbing, …)

Education
1973-1986 Basic(Preparatory), junior (preliminary), high (secondary) education in different schools between Saudi Arabia and Egypt with degrees not less than B (very good).
1992 Bachelor of science in the field of major chemistry in Cairo University with a graduation degree equal to GOOD.
Skills
Linguistics Arabic Native tongue.
English Fluent.
Spanish Very Good.
German Fairly speaking.
French Building up a skill.
Italian Building up a skill.
Computer A pro software and hardware.
Designed the first PDA MUD ENGINEER MATE spread sheet in the whole world.
Experience
2007-now Consultant mud engineer for Petrochem (Petrochem Performance Chemicals L.L.C.)?
1987-2006 Senior drilling fluids engineer in EMEC (Egyptian Mud Engineering And Chemicals
Company).
Trainee 1997-1998
Mud engineer 1998-2003
Senior Mud Engineer 2003-2006

1995-1997 As a drilling hand in EDC (Egyptian Drilling Company).
1993-1995 In sales

Activities
Music hey live it, beat it.
Body building health is wealth.

Refrences
Personally I prefer it to be that:
8 years without a single ran off ……………
4
Wells drilled by me as a mud engineer

Country Area Post Well Name Depth From To
Egypt Agiba Trainee LI-34-I 12,000 ft 3 /12/1997 16/12/1997
Egypt Agiba Trainee LI-34-I 12,000 ft 3 /2 /1998 18/2 /1998
Egypt Babetco Trainee BED1-15 3117 m 3 /4 /1998 1 /5 / 1998
Saudi Arabia Aramco Mud Eng. Sdgm-308 8168 ft 22/5 /1998 1 /6 /1998
Saudi Arabia Aramco Mud Eng. Sdgm-306 8010 ft 1 /6 /1998 27/6 /1998
Saudi Arabia Aramco Mud Eng. Utmn-1811 13107 ft 5 /8 /1998 17/9 /1998
[Utmn-1811 well was a blow out disaster in which a snubbing operations was done on that well to control and kill the well and it should be remarked that this was the first time in the middle east that a snubbing unit with that size get to work k-600 which required a very unique performance in a very difficult and sensitive situation of a pressure ranging between 1500 – 4000 psi accompanied with H2S and Co2 gases contamination that required milling and coil tubing operations with a mud weight ranging from 100-140 PCF]
Saudi Arabia Aramco Mud Eng. Utmn-1811 13107 ft 22/10/1998 24/11/1998
Saudi Arabia Aramco Mud Eng. Mud Plant 7820 ft 12/5 /1999 23/5 /1999
Saudi Arabia Aramco Mud Eng. Sdgm-434 7820 ft 23/5 /1999 28/5 /1999
Saudi Arabia Aramco Mud Eng. Hwyh-211 - 28/5 /1999 10/6 /1999
Saudi Arabia Aramco Mud Eng. Mud Plant - 15/7 /1999 29/7 /1999
Saudi Arabia Aramco Mud Eng. Mud Plant 7643 ft 1 /9 /1999 29/10/1999
Saudi Arabia Aramco Mud Eng. Mud Plant - 3/12/1999 12/1 /2000
Saudi Arabia Aramco Mud Eng. Mud Plant - 3/2 /2000 1 /3 /2000
Saudi Arabia Aramco Mud Eng. Hwyh-911 15400 1/3 /2000 12/3 /2000
Saudi Arabia Aramco Mud Eng. Sdgm-415 14600 ft 28/4/2000 26/5/2000
Saudi Arabia Aramco Mud Eng. Sdgm-415 14600 ft 23/6/2000 23/7/2000
Saudi Arabia Aramco Mud Eng. Sdgm-441 14400 ft 25/8/2000 22/9/2000*
Saudi Arabia Aramco Mud Eng. Sdgm-441 14400 ft 23/10/2000 23/11/2000
Saudi Arabia Aramco Mud Eng. Sdgm-441 14400 ft 21/12/2000 24/1/2001
Saudi Arabia Aramco Mud Eng. Utmn-2103 14600 ft 24/2/2001 23/3/2001
Saudi Arabia Aramco Mud Eng. Utmn-2103 14600 ft 21/4/2001 31/5/2001
Saudi Arabia Aramco Mud Eng. Hwyh-922 12160 ft 20/6/2001 7/7/2001
Saudi Arabia Aramco Mud Eng. Hwyh-962 14660 ft 7/7/2001 3/8/2001
Saudi Arabia Aramco Mud Eng. Hwyh-962 14660 ft 2/9/2001 4/10/2001
Saudi Arabia Aramco Mud Eng. Hwyh-962 14660 ft 7/11/2001 14/11/2001
Saudi Arabia Aramco Mud Eng. Fzrn-21 8421 ft 1/12/2001 21/12/2001
Saudi Arabia Aramco Mud Eng. Waqr-3 15100 ft 10/1/2002 17/2/2002
Saudi Arabia Aramco Mud Eng. Utmn-1817 - 27/2/2002 21/3/2002
Saudi Arabia Aramco Mud Eng. Waqr-4 - 15/5/2002 14/6/2002
Saudi Arabia Aramco Mud Eng. Hwyh-922 12160 ft 14/6/2002 29/6/2002
Saudi Arabia Aramco Mud Eng. Waqr-4 - 25/7/2002 27/8/2002
Saudi Arabia Aramco Mud Eng. Waqr-5 15062 ft 31/8/2002 15/9/2002
Saudi Arabia Aramco Mud Eng. Waqr-5 15062 ft 27/10/2002 27/11/2002
Saudi Arabia Aramco Mud Eng. Waqr-6 15058 ft 23/12/2002 15/1/2003
Saudi Arabia Aramco Mud Eng. Waqr-6 15058 ft 7/2/2003 12/3/2003
Saudi Arabia Aramco Mud Eng. Waqr-6 15058 ft 9/4/2003 3/5/2003
Saudi Arabia Aramco Mud Eng. Gazl-11 17150 ft 5/5/2003 9/5/2003
Saudi Arabia Aramco Senior Mud Eng. Abqq-488 15002 ft 10/5/2003 14/5/2003
Saudi Arabia Aramco Senior Mud Eng. Hrdh-693 15000 ft 28/5/2003 7/5/2003
Saudi Arabia Aramco Senior Mud Eng. Tinat-13 16530 ft 7/5/2003 29/6/2003
Saudi Arabia Aramco Senior Mud Eng. Tinat-13 16530 ft 25/7/2003 25/8/2003
Saudi Arabia Aramco Senior Mud Eng. Hrdh-951 - 24/9/2003 11/10/2003
Saudi Arabia Aramco Senior Mud Eng. Abqq-448 - 11/10/2003 14/10/2003
Saudi Arabia Aramco Senior Mud Eng. Hrdh-658 15000 ft 15/10/2003 21/10/2003
Saudi Arabia Aramco Senior Mud Eng. Hrdh-963 13382 ft 12/11/2003 8/12/2003
Saudi Arabia Aramco Senior Mud Eng. Abqq-481 >13000 29/12/2003 /1/2004
Saudi Arabia Aramco Senior Mud Eng. Abqq-481 >13000 10/1/2004 4/2/2004
Saudi Arabia Aramco Senior Mud Eng. Abqq-481 >13000 3/3/2004 8/4/2004
Saudi Arabia Aramco Senior Mud Eng. Abqq-481 >13000 2/5/2004 3/6/2004
Saudi Arabia Aramco Senior Mud Eng. Abqq-482 >13000 6/7/2004 6/8/2004
Saudi Arabia Aramco Senior Mud Eng. Abqq-482 >13000 1/9/2004 29/9/2004
Saudi Arabia Aramco Senior Mud Eng. Abqq-482 >13000 5/10/2004 29/10/2004
Saudi Arabia Aramco Senior Mud Eng. Utmn-1826 >13000 17/1/2005 14/2/2005
Saudi Arabia Aramco Senior Mud Eng. Utmn-1826 >13000 13/3/2005 10/4/2005
Saudi Arabia Aramco Senior Mud Eng. Andr-552 >13000 9/5/2005 17/6/2005
Saudi Arabia Aramco Senior Mud Eng. Andr-534 >13000 6/7/2005 3/8/2005
Saudi Arabia Aramco Senior Mud Eng. Andr-534 >13000 1/9/2005 30/9/2005
Saudi Arabia Aramco Senior Mud Eng. Hrdh-1417 >13000 1/10/2005 17/11/2005
Saudi Arabia Aramco Senior Mud Eng. Hrdh-1406 >13000 1/12/2005 3/1/2006
Saudi Arabia Aramco Senior Mud Eng. Hrdh-435 >13000 3/1/2006 31/3/2006
Saudi Arabia Aramco Senior Mud Eng. Hrdh-432 >13000 11/5/2006 14/6/2006
Yemen DNO Consult. Mud Eng. Nabragah-13 3125 m 1/4/2007 5/5/2007 ?
Yemen DNO Consult. Mud Eng. Nabragah-15 2120 m 7/6/2007 7/7/2007 ?

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1851 to 1900 of 7055)Go to Search Parameters...
Brief Description
Drilling high angle & horizontal wells, H2S, perform injection & production completion, well testing. Experienced in directional drilling, dealing w/ anti-collision, etc.
Innovative career in the field of electrical power engineering: Installation, Service and Commissioning
electrician
A total of 6 years of industrial experience which includes 2 years of production & commissioning experience in an Indian Refinery and 4 years of Advanced Process Control experience with Honeywell India & Aspen Tech Middle East.
AN EXPERIENCED BOILER AND PIPELINE DESIGN ENGINEER
EXPERIENCED PETROLEUM ENGINEER and PMP (PROJECT MANAGER), DEEP OFFSHORE, DRILLING, COMPLETIONS, SUBSEA EQUIPMENT AND CONNECTORS
Safety and Risk Researcher
I am Civil Structural Engineer having detail engineering and design experience of Oil & Gas industries. I have done my BS in Civil Engineering. I got exposure in the design of Civil & Structural components of Oil & Gas Plants.
Completed MS and BSc in Geology. Working in the Geological Survey of Bangladesh as an Assistant Geologist on 18 February 2007. My duties is to make Geological Reports, Geological Mapping, Environmental Observation, Identifying the Hazardous zones, River and Shore line Erosion observation
Project Manager with 19 years of hands on Experience of Executing Green field projects of Hydro & Pyrometallurgy- Zinc, lead & Copper, Cu SX & EW, Cobalt SX &EW, Leaching & Flotation plant, Copper Smelter. Transmission lines, HT & LT motors upto 7700KW, VVVF upto 5MW, Hot & Wet ESP's.
Over 17 Years of professional experience in Piping, Basic & Detail engineering of Offshore(FPSO, FPU & Wellheads), Onshore Refineries, Petrochemical plants, Oil field developments, Fertilizers, Chamical, Process and industrial plants of various types with excellent knowledge in Industry standards
Lead/Senior Instrument Designer 13years experiance with PDS Intools & programming skills. Intools ADministrator. SPI 2007 Administrator. Smartplant Intools Administrator
Diploma in Mechanical Engg & Having 10 years experience as a Piping Designer / Draftsman in OIL & Gas field
Sound technical knowledge of broad range of electrical transmission & distribution products, excellent knowledge of preparation of tenders and contract management, Good experience in EHV Turnkey Projects with Proven success record into complex environments
API 653 Qualified Inspector having experience in Static Equipment Inspection
Well Stimulation Engineer
Pre-Comms. Rep/Witness for Umbilicals , Subsea Controls/hydraulics
GIS Analyst
I am technically sounded professional having design, Construction, Erection & commissioning engineering experience in Field instrumentation & Systems. I have exposure in various industries like hydrocarbon industry, Power Plant industry, etc. I look for a suitable position in a design engineering or
Instrument and Fire ans gas Maintenance
Experienced Instrumentation and Control Engineer with extensive knowledge in PLC, SCADA, RTU and Network programming, Engineering Schematic development, Troubleshooting, Project commissioning and latest Industry standards.
Petroleum Engineer, I have three years of experience in the Oil Industry, specifically in Petroleum of Venezuela (PDVSA) as Production optimization Engineer and thermal engineer (Alternate and continuous Steam injection), Experience on wells, producing under artificial
Expert to work with ORCAFLEX ,ORCALAY,OFFPIPE,AGA Software - Able to work with CAESAR II,SAGE Profile,MOSES,AUTOPIPE,MATHCAD - Worked with DNV 1981,DNV 1996,DNV 1998 (Guideline No. 14),DNV 2000 (OS F101),DNV RP B401,DNV PR F103,DNV RP E305,DNV RP F105,DNV RP F107,BS 8010, BS 7910, API 5L, ASME B31.8
Mud Engineer (senior) experienced motivated ready to relocate works anywhere
Geoscientist, Senior reservoir modeller. Geostatistician. Scientific software developer
Over Eight years experience in the field of Quality Assurance and Quality Control services. Have performed inspections in the fields of Oil-Refinery, Petro chemical plant, Power plants, Structural Steel Fabrication shops, Flow line construction.
Extensive work experience and proficiency in the area of PLC,SCADA,HMI, Industrial Communication driver development/networking and Field instruments in a carrier spanning of 10+ years of experience in the sector of Oil & Gas, Water and Waste water treatment, Power, Pharmaceuticals, Chemicals, Packag
• Bachelor of Engineering in Mechanical from Bharathidasan University Nov-99
HSE Supervisor/ DP operator/ HLO/ Chief officer
University of Oil and Gas – Ploiesti, Engineer 2003;- BOSIET OPITO & H2S Induction - Survival Course in Malta at International Safety Training Center- with degree and personal safety logbook valid until Nov. 2008, Specialized certification course in “Programming annalist” – Windows, dBase, Fox
Checker/Sr. Piping Designer having a very good exposure in Piping layouts for Oil and Gas , Refineries and petrochemical plants, checking of Isometrics, MTO, Piping layouts, good working experience in PDS Desinn review.
* Membership in ASET and with work experience in instrumentation and control systems field. * Familiar with field instrumentation and industrial control system. * Experience in multiple loop control systems, PLC, DCS, SCADA systems * Fluent in computer and AutoCAD drawing skills.
A professionally qualified and technically competent Data Management Analyst, with 14 years experience in Well log Data Processing and Petrophysical Data Management.
To receive a laboratory, Technical, Analysis or Research position working in the Petroleum and/or Oil Field.
I am having Bachelor Degree of Mechanical Engineering certificate. I have 7 years experience in Qa/Qc field and 10 years experience in production field. And also I have completed the AWS-CWI,NDE Level II.
Piping design, pipe supports, project coordination. 25 years experience in petrochem industry. Autocad, word, excel, office. Motivated and available.
Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.
HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.
Please find below my details of experience for Estimation Engineer Position. I am a diploma mechanical engineer and keen in excelling in my career with hard work and accepting higher responsibilities.
Senior Pipelines Engineer with 16 years experience with International Consultancies.
Senior Training Officer, Mechanical with 17 years of extensive knowledge and experience in all aspects of technical training. Planned, developed, designed, conducted, mechanical training programs following the approved Competence Development Programs, ensuring mechanical fitters, tradesmen and techn
Engineering, Design, Installation, Commissioning, Programming, Management, Consultancy & Upgrades etc., for all types of Instrumentation & Communication Projects for Oil & gas Industry, Paints, Refinery, Petrochemical and Glass. Preparation of Design Basis Scoping, Functional Specifications Document
Procurement Engineer with 14year Exp. in Oil/Gas/Engineering Industry, Qualification Diploma in Fabriction Engineering
Oil & Gas Production Chemistry, Chemical Engineering, Corrosion Engineer, Process Optimisation, Production Chemicals Optimisation, Corrosion/Scale Prevention/Inspection, Process and Environment Monitoring, Well testing/completion design, Process design/waste water management, Extensive field experie
I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I am very adaptable to changing projects and work schedules and have a proven ability to quickly train on different facilities. I have excellent planning and organizational skills
Degree in Electronics & Instrumentation with 6 years of experience in Engineering and Projects, Trained by various Instrumentation Vendors, Hands On experience in SCADA & PLC Systems, Field instrumentation, Vibration monitoring system (SKF), witnessed FAT for Electrical and Instrumentation Packages.
Mechanical/process/system completion commissioning and handing over
PHDWin, Field Direct, PA, Petra, OFM, MS programs, AS400, Wellcore, Webcore
PDMS Administration involving Teams, Users, Dbs,MDB. Access control rights and Roles management,Clash Manager Administration.
On line analyzer & Field Instruments Installation & commissioning Experience, DCS & PLC maintenance level experience
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   [ 38 ]   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com