Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #63424 next resume »»
CONTACT INFORMATION:
View contact information...

Sr. PIPELINE / PIPING DESIGN ENGINEER
GAS & OIL INDUSTRIES

Personal information: -
Date of Birth: 5-10-1974
Place of Birth: Alexandria
Nationality: Egyptian
Religion: Moslem
Marital Status: Single
Military status: Exempted

Education

㻠Degree: B.Sc in Mechanical Engineering in Year 1997 - Faculty of Engineering Alexandria
㻠Final Grade: Very good with degree of Honor
㻠Graduation Project: Design of Heat Exchangers
㻠Graduation grade: Excellent
㻠Degree: Master of Science in Mechanical Engineering "Heat Transfer" in 2003 - Faculty of Engineering Alexandria
㻠Thesis Subject: Complete Thermal Design of Shell-and-Tube Heat Exchanger
㻠Degree: Register for PHD in Mechanical Engineering "Heat Transfer" in 2004 - Faculty of Engineering Alexandria

Field of Experience

㻠Engineering, Design and stress analysis of Piping / Pipeline Systems Using ASME B31.3, B31.4, B31.8, B16.5, B16.47, B16.9, ANSI, API 5L, API 1102, API 6D, AWWA, SHELL and BS Standards and The Following Software:
* CAESAR II 4.5
* CAESAR II 5.0
* Bently AutoPipe 2004
* AFT Impulse (Surge analysis)
* PIPING SYSTEM FLLUID FLOW (Network study)
* SOLIDWORKS2006
* COSMOSWORKS & COSMOSFLO 2006 for FEA and FEM
* ANSYS 10 Workbench
* PDMS 11.5
* ARCVIEW 8. AND GIS SYSTEMS USING GPS UNITS
* Mapsource v3 Using with GPS hand units
* MATHCAD 2000, MATHCAD 14
* AUTOCAD 2002, 2004 AND 2006
* AUTOCAD MAP2000i

Current Position
APRIL 2006 to till now
(OIL & GAS) CONSULTANT COMPANY IN ILF ABU-DHABI
Senior Pipeline Engineer

1) Project: SHARQIYAH DESALINATION PROJECTS
CLINT: MINSTRY OF HOUSING ELECTRICITY AND WATER
Duties:
- Pipeline Engineer Involved in Detail Engineering of Pipeline Design Bases, Pipeline rout drawing Alignment sheets, Road crossing details, Typical Drawings and Pipeline MTO
- Piping Stress analysis for on-plot Piping Using Autopipe 2004

2) Project: NEW FLOWLINE FOR M-3 AND M-7 WITH TIE-IN AT M-12
CLINT: GALFAR
Duties:
- Making Stress analysis Study for Main Pipeline using CAESAR II 5.0 in Austria- Innsbruck

3) Project: EPIC OF PIG LAUNCHERS & RECEIVERS FOR 13 NOS. CRITICAL MAIN OIL LINES
CLINT: ADCO
Duties:
- Pipeline Engineer Involved in Detail Engineering of General Arrangement, Layouts, Engineering Specification, Datasheet, Pipe Support Details, Road Crossing Details and Isometric with bill of materials
- Pipeline Stress analysis engineer involved in Making stress analysis Model for All onshore new pipelines Using CAESAR II 5.0 (MOL1-from Bab to Jebel Dhana)

4) Project: Jeddah Plants Heavy Fuel Pipeline
CLINT: SWCC
Duties:
- Pipeline Engineer Involved in Feed Documents for General Arrangement, Layouts, Line Routing, Engineering Specification and Datasheet, Road Crossing Details, Pipe Support Details, Typical Drawings and Isometric with bill of materials
- Pipeline investigation and Survey using Garmin GPS hand Units and Waypoints in order to get the best Pipeline routing
- Involved in Feed Documents of Pipeline Design Bases, Pipeline rout drawing and Pipeline MTO
- Pipeline Stress analysis engineer involved in Making stress analysis Model for New pipeline Using CAESAR II

5) Project: EPIC OF HYDRO CYCLONE SEPARATOR IN BAB AREA
CLINT: ADCO
Duties:
- Piping Engineer Involved in Detail Engineering of General Arrangement, Layouts, Engineering Specification For GRE Pipe, Fitting and Flanges, GRE Datasheet, Pipe Support Details For GRE Pipes, Road Crossing Details and Isometric with bill of materials

6) Project: NATURAL GAS DISTRIBUTION PROJECT IN ABU DHABI
CLINT: ADNOC
Duties:
- Piping Engineer Involved in Feed Documents for General Arrangement, Layouts, Overall Plot plane location of metering skids, PR Skids and H2s Removal Skids, wall thickness calculation, Engineering Specification and Datasheet, Road Crossing Details, Pipe Support Details.
- Pipe Stress analysis engineer involved in Making stress analysis Model for New piping Using CAESAR II 5.0
- Piping engineer involved in Preparing the HAZOP package and the close out report, Plus Preparation of the Node for the HAZOP
- Process engineer Involved in the Hydraulic report and the Line sizing

7) Project: Taweelah to Fujairah Gas Pipeline Project (TFP)
CLINT: DEL
Duties:
- Pipeline Engineer Involved in Feed Documents for General Arrangement, Layouts, Line Routing, Engineering Specification and Datasheet, Road Crossing Details, Pipe Support Details, Typical Drawings and Isometric with bill of materials
- Pipeline investigation and Survey using Garmin GPS Hand Units and Waypoints in order to get the best Pipeline routing
- Involved in Feed Documents of Pipeline Design Bases, Pipeline rout drawing and Pipeline MTO

JUN 2005 to APRIL 2006
GRP and GRE Pipe Factory in Sharjah FZA (U.A.E):
Pipeline Design Engineer

1) Project: DUBAI FESTIVAL CITY DISTRICT COOLING PROJECT
CLINT: Drake and Scull international
Duties:
- Pipeline Engineer Involved in Detail Engineering of Pipeline Design Bases, Pipeline rout drawing and Pipeline MTO
- Pipeline investigation using GPS Units and Waypoints in order to get the best Pipeline routing
- Making Stress analysis Study for Main Pipeline and Piping using CAESAR II 4.5
- Making FEM Models using SolidWorks and FEA Models using ComosWorks for all the Pipe Fitting

SEP 2004 to JUN 2005

Pipeline Design Engineer
For KBR Consultant Qatar

1) Project: INSTALLATION OF ONE NEW RAW NGL INJECTION FACILITIES AT FAHAHIL STRIPPING PLANT - DUKHAN Project
CLINT: QP
Duties:
- Pipeline Engineer Involved in Detail Engineering of General Arrangement, Layouts, Specification and Isometric with bill of materials
- Pipeline Engineer Involved in Pipeline Design Bases, Pipeline rout drawing Alignment sheets, Road crossing details, Pipe Support Details, Typical Drawings and Pipeline MTO
- Pipeline Stress analysis engineer involved in Making stress analysis Model for All onshore new pipelines Using AutoPipe 6.2

2) Project: EPIC FOR THE FIRE AND GAS DETECTION/ PROTECTION AND SAFETY UPGRADES IN THE DUKHAN FIELDS
CLINT: QP
Duties:
- Piping Engineer Involved in Detail Engineering of General Arrangement, Layouts, Specification and Isometric with bill of materials
- Involved in Detail Engineering of Pipeline Design Bases, Pipeline rout drawing and Pipeline MTO

3) Project: NEW INSTRUMENT AIR COMPRESSORS SHED - DUKHAN Project
CLINT: QP
Duties:
- Project Engineer Involved in Detail Engineering and IDC, Coordination between the
Company and the Clint
- Regularly reviews engineering drawings and specifications to monitor progress and ensure compliance with Client's specification.
- Prepare MTO for the quotations for jobs.

SEP 2001 TO AUG 2004
(OIL & GAS) CONSULTANT COMPANY IN ABU-DHABI (PEL):

Pipeline / Piping Design Engineer

Duties:
- Piping / Pipeline Engineer Involved in Detail Engineering of General Arrangement, Layouts, Specification and Isometric with bill of materials
- Pipeline Engineer Involved in Pipeline Design Bases, Pipeline rout drawing Alignment sheets, Road crossing details, Typical Drawings and Pipeline MTO
- Piping Engineer Involved in Detail Engineering of General Arrangement, Layouts, Specification, Pipe Support Details and Isometric with bill of materials
- Involved in Detail Engineering of Pipeline Design Bases, Pipeline rout drawing and Pipeline MTO
- Pipeline / Piping Stress analysis engineer involved in Making stress analysis Model for All onshore pipelines and Piping Using CAESAR II
- Piping /Pipeline Stress analysis engineer involved in Making stress analysis Model for (GRE / GRP Lines) Using CAESAR II

For the following Projects

1) Project: ENGINEERING SERVICES FOR JEBEL DHANNA / BAB ¡V PMRFs Project
CLINT: ADCO
2) Project: ASAB NEW CHEMICAL INJECTION Project
CLINT: ADCO
3) Project: ASAB DRAINGING OF POLIC CAMPS AND CLINIC Project
CLINT: ADCO
4) Project: ENGINEERING SERVICES FOR SAS-G PMRFs Project
CLINT: ADCO
5) Project: ASAB ARTIFICIAL LIFT OIL WELLS Sb-052,Sb-107, Sb-135
CLINT: ADCO
6) Project: JABEL DHANNA Tank Farm Area, Facility Upgrade
CLINT: ADCO
7) Project: New Bab Manifold for RDS1, RDS2, RDS6 and new BCDS
CLINT: ADCO

Sep 1998 to Sep 2001
Position

Mechanical Design Engineer and Follow up Engineer in the Field of Construction of food industry equipments and piping

Working in Design of Mechanical Equipment & Project execution follow-up Engineer in Technological industrial Development. Co

1- Preparing the required Calculation and Data sheet for Shell-and-tube heat
Exchangers Design and Rating Problems Using TEMA and HTRI Standards

2- Preparing the workshop drawings, the necessary calculations required
And Mechanical Design Using SOLIDWORKS and FEA USING
COSMOSWORKS for Stress analysis study of the
Following:

- Vibrating Sifter
- Rotating Sifter
- Mixing, Agitation and storage Tanks with Piping
- Dust Collector Filters
- Mixer Silo and Storage Silo
- Screw Conveyors & belt conveyor
- Cyclone
- Bearing House, sprocket, Pulleys and Gears
- Steel belts and Drums
- Slurry machine (6000 rpm)
- Chopper Machine

3- Making Stress Analysis using CAESAR II stress analysis for Piping

4- Preparing 3D Modeling of Mechanical Equipment Using SolidWorks, Inventor, AutoCAD and FEA Models Using Cosmosworks

5- Working as Mechanical Engineer in the field of Project execution follow-up
Of the steel fabrication & erection works for the project

For the following projects

1- Tobacco Eastern Company in Alexandria
2- International aromatic in Alexandria

Aug 1997 to Sep 1998

Working in PETROJET as Piping Design Engineer involved in Detailed Engineering in Piping Design and Drawing Details of Medor Project at Alex Free Zone Area

Part time Jobs

Aug 2005 to Des 2006
Process Group in Abu Dhabi

Piping Design Engineer

1) Project: Jabil Ali Power Station
CLINT: Dubai Electricity & Water Authority
Duties:
- Piping Design Engineer Involved in Detail Engineering and design using Solidworks & PDMS 11.5 Pipe routing of Piping Design Bases, G.A.Skid Detail drawing and Piping Skid MTO & Piping isometric details for pressure reduction skids, metering skids and ESD skids
- Piping Stress analysis engineer involved in Making Stress analysis Study for Piping Skids and Piping layouts using CAESAR II 4.5

Nov 2005 to April 2006
J P KENNY in Abu Dhabi

Piping/Pipeline Stress Engineer

2) Project: BAB OGD III
CLINT: NPCC
Duties:
- Piping Stress analysis engineer involved in Making Stress analysis Study for 6 RMS's Manifolds units, Pipelines and well head Piping using CAESAR II 4.5

Jan 2006 to April 2006
Bemco-Dubai

Piping Design Engineer

3) Project: Dubai Aweer Power Station

CLINT: Dubai Electricity & Water Authority
Duties:
- Piping Design Engineer Involved in Detail Engineering and design of Piping layout, Isometrics, Pipe Support Details, and GA Drawing using PDMS 11.5
- Piping Stress analysis engineer involved in Making Stress analysis Study for Piping of the 3 compressor skids using CAESAR II 4.5

Nov 2006 to April 2007
CCC Mosafa

Pipeline Stress Analysis Engineer

4) Project: Eastern Gas Distribution System
CLINT: Dolphin Energy
Duties:

- Piping / Pipeline Stress analysis engineer involved in Making Stress analysis Study for Piping inside the Plant in( Maqta, Tawila, Jabal Ali Power station and Offshore Pipeline (8KM) between the stations using CAESAR II 4.5
-
Jun 2007 to Till now
MOAK Engineering

Piping Design Engineer

5) Project: EPIC FOR LPG PUMPING STATION AND ASSOCIATED FACILITIES
CLINT: QP
Duties:

- Piping Design Engineer Involved in Detail Engineering and design of Piping layout, Isometrics, Pipe Support Details, General Arrangement Drawing, Plot Plane, Overall Plot Plane and Key plane Drawings
- Site visit investigation for the existing facility in Qatar
- Valve Data Sheets and Specification and Piping component data sheet and specification and the MTO reports
- Piping Stress analysis engineer involved in Making Stress analysis Report for the QP Refinery LPG bottling area using CAESAR II 4.5

Languages:

Arabic: Tongue Language
English: Both Written & Spoken + TOEFL 560

Computer Skills

- CAESAR II 4.4, 4.5 (Pipe Stress Analysis)
- Bently AutoPipe 2004 (Pipe stress analysis)
- CAEPIPE 5.1 (Pipe Stress Analysis)
- AFT Impulse (Surge analysis)
- PDMS 11.5
- ANSYS 10 Workbench
- Solidworks 2006 plus (3D Modeling)
- Cosmosworks 7 (FEA)
- Cosmosfloworks ( CFD )
- Piping system Fluid flow 2.3 ( Single phase Pressure drop Calculation)
- CADPIPE 2002 (3D Modeling)
- AutoCAD 14,2000, 2002,2004 (2D and 3D)
- MathCad 2000, MathCad 13
- MapSource V3.0 for handling Maps
- Visual Basic 4,5,6
- Dos Windows 98, 2000 & XP
- Microsoft Word, Excel, Power Point & Access
- Visual Nastran 2002 (FEA)
- AutoDesk Inventor 9.0
- Auto Lisp (Visual lisp)
- Using Internet Explorer, Netscape Communicator

Training

* Offshore Sea Survival Course In ADMA
* Heat Exchangers Technology "Alex. University"
* Finite Element Analysis Technology "Alex. University"
* Design Dimension and Tolerance "Alex. University"
* CAESAR II "Petrojet"
* PDMS 11.5 IN "ALEX. UNIVERSITY"
* TOEFL in EC
* Visual Basic Programming In CMI
* Auto lisp Programming in CMI

View contact information...
«« previous resume next resume »»
Search Results (Resumes 951 to 1000 of 6635)Go to Search Parameters...
Brief Description
Lead engineer/Manager for DCS /PLC/ESD systems
Assist General Manager
IRCA Certified ISO QMS 2000 Lead Auditor (No:01181089) IRCA Certified ISO 14000 EMS Auditor IRCA Certified OHSAS 18001 OHSMS Auditor Certified Quality Auditor (ASQ CQA) Certified Welding Inspector AWS CWI Certified Quality Manager (CQM)
I have 33 years experience in design/construction project management on Petro-chemical Projects which include upstream oil and gas, refinery projects and chemical projects. I have managed both green-field and brown-field projects on schedule and within agreed budgets.
Qualified like Mettalurgical Engineer, specialty Metallurgical Processing, Internal Auditor for Quality Systems in accordance with ISO 9000 series, Computers abillities..
Experienced HDD Engineer
Petroleum Engineer with 9 years of experience in gas and petroleum reservoirs
Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.
I have over 15 years experience working as Maintenance Planner in the Petroleum industry using Maximo and other computerized maintenance system
I have 17 years valuable experience: 6 years I was working in the gulf of suiz petroleum co. in Egypt. 11 years I was and still working in Abu Dhabi water and electricity authority in UAE.
·ICCP Design and Installation Principles · Quality Control – Pipeline Integrity Management, Data Management; Protective Coating Manufacturing Technology
Planning Engineer with a degree in Mechanical Engineering. Skilled in carrying out Daily Maintenance Planning & Plant Turnaround Planning. Expertise in using SAP PM & MM Modules. Conversant with Computerised Maintenance Management Systems. Hands-on experience in preparing MS Project Schedules.
Electrical Engineer with more than fourteen years’ experience in the filed of design, testing & commissioning and maintenance of substations up to 220kV; study, analysis, modifications, testing and trouble shooting of protection systems; power system analysis including IPP interconnections/impact
I have around 20 years oil and gas field experience,out of which about 5 years are in offshore.Presently I am working in an FPSO,in Mauritania,W.Africa.
CONSTRUCTION PROJECT MANAGEMENT: Managing all construction projects. Estimating time and material costs. Maintaining quality and cost control. Conducting weekly safety meetings.
Over 15 years oil industry experience with an unusually broad-ranging geological/petrophysical background. Proven ability to work efficiently as part of a small team due to well-developed technical and organisational skills. At ease with tasks requiring personal responsibility for attaining high sta
Field Instrument Engineer with a total of 19 years related experience with specialist knowledge of Control Valves. Qualified to Higher National Diploma level ( Mechanical Engineering , 1985 ).
More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic
A Petroleum Engineering professional with sixteen years of diversified E&P experience in onshore environments with an Indian national oil company, Oil India Limited and Cairn-Energy India Pty. Ltd (incorporated in Autralia)
Degree on Industrial Engineering. More than 15 years intensive involvement in Oil and Gas Industry (the last 9 years in supervisory level). Received various assignments such as Gas Plant Operator, Board Operator, Metering Technician, Field Engineer, Mechanic Supervisor and Offshore Supervisor.
16+ years working experience with major E&P companies in North Africa & SE Asia. Have extensive experience in supervising and implementation of reservoir management strategies, predict performance and optimize future depletion and field development planning.
I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, Shutdown Coordinator with over 16 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.
I have commitment to safety, exceptional service and continuous improvement.
Petroleum Engineer looking for drilling or production work. 20+ years experience. Worked SE Asia, LA Gulf Coast, FSU, Saudi Arabia and Venezuela. Experience covers on site and office engineering in drilling and production.
Electronics Engineer, 12+ yrs experience, Project Management, Instrumentation design & detailed engineering, Maintenance / Oil & Gas and Chemical Industry.
QA/QC Engineer with AWS,CSWIP 3.1,QMS Lead Auditor,ASNT Level II in RT,UT,MPI,PT,VT
Was working like mechanical engineer, technician in ops & commissioning departments
Sr. Static Equipment Engineer
Drilling engineer with experience in directional drilling and programmer skills
Over 17 years of experience in Oil, gas and power projects such as LNG plants, offshore projects,refineries, gas based simple cycle, cogeneration and combined cycle plants, steam turbine based plants etc.
Mechanical Engineer Graduated as DI. Sulzer Metco AG (Switzerland) CH Wohlen Valuarc Thermal Spray Zinc. Metallization Arc spray School of Thermal Spraying Technology UK. Qualified applicator for all types of fireproofing and modern coating systems. A.I.O.C permit to work system.
I am a qualified, talented professional with excellent work experience(10+ years) *in Design, Erection and Commissioning of Control systems (DCS-ABB P14) in Power/Desalination Plants and fair knowledge of LV Switchgear*.
Computer Literate: Words, Excel, CADD (Micro Station), Familiar with National Electrical Code, NFPA, IEEE, Saudi Aramco CADD Standard and Engineering Standard and other International Standard.
I work for the Libyan national oil corporation as a HSE consultant, I have a very good computer skills, and I am bilangual (English and Arabic)
Project Mechanical Engineer with 10 year oil gas experience
i am original pipeline line engineer ,as well as project engineer
Compressor stations, Heat exchangers, Nitrogen pre-coolers, Turbine expanders, Cryogenic distribution lines, Cryogenic storage tanks, Vacuum, Control, CMMS
Document Management Sytem PM+ or Active Project, Diploma In MEchanical Engineering
PDS/PDMS Administrator Having Over all 12 Years Of Experince in Oil And Gas Industry
Piping/Pipeline stress analysis engineer, and support design
Oil and Gas (15 years) Condition Monitoring (13 years) Reliability Engineer (8 years) Training (10 years)
My entire experience relates to substation & transmission line construction, maintenance, protection & instrumentation and project/design review engineer
Project Manager with Plus 13 years of rich experience of Piping & Pipeline in conjunction with Instrumentation, Civil & Electrical in Gas & Oil Industries both onshore & offshore including plus three years of Gulf experience in different trades of Piping.
18 Years of Experience in Detailed engineering in Preparation and Drafting, checking related to power Projects and Refinery & Petrochemicals. In both Indian & Global projects.
Presently I am working with ABB Lummus, Singapore in the post of Senior Structural Engineer.
GNPOC(Grater Nile Petroleum Operating Co.Ltd.Sudan.Through Ipedex. Senior Production Operator in CPF. Since Dec 2nd 2004
Drilling Engineer / Foreman (onshore)with 14 years field supervisory experience and 5 years engineering/planning experience.
1. 16 years of experience & 14 years as Licensed Engineer. 2. Problems Solver with high standards of quality. 3.
Drilling supervisor with 19 yrs of experience on land rigs exploratory, development, workover , horizontal, multilateral wells available . Excellent communication skills, result oriented, get after it attitude, hard working , safe approach, overseas experienced. IWCF valid. References on request.
i can all design for instrument Offshore & Onshore
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   [ 20 ]   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com