Resume - Specialized in Corrosion & Materials Technology, Failure analysis, Quality contr...

Misco Jobs

Resume #63521

CONTACT INFORMATION:
View contact information...

Corrosion Engineer

SUMMARY:

Corrosion engineer with over 5 years of experience in materials selection, paints & coatings, cathodic protection, failure analysis of materials. Skilled with a wide variety of materials & coating evaluation laboratory methods & instruments. Good knowledge of the ASTM, NACE, SSPC & API standards and specifications followed in upstream & downstream process industry. Member of NACE International.

EDUCATION:

Master of Technology, Corrosion Science & Engineering, 2005
Indian Institute of Technology (IIT Bombay) Mumbai

Project: Flow Induced Corrosion of AISI 304 & 2205 Duplex SS
Seminar: Corrosion in Refinery ¡V Causes and mitigation

Bachelor of Engineering, Mechanical Engineering, 2001
Nagpur University, India

EXPERIENCE:

Equip Engineers India Pvt. Ltd., Mumbai

* Represent foreign Principals in both upstream & downstream process industry of India for supply of equipment, packages & services
* Assisting foreign principals in meeting technical specifications, tendering procedures and techno-commercial negotiation with clients
* Selection & supply of process pipes, structural pipes and line pipes (including claded pipes)
* Selection & supply of coating system for structural, piping, equipments and line pipes
* Design, selection & supply of sacrificials type unmonitored cathodic protection system for submerged offshore structural, associated submarine pipeline and riser.

Project details:

„« Selection and supply of
„Ï Process pipes (CS, alloy steel & SS) for Jamnagar Export Refinery Project (JERP) and existing refinery of Reliance
„Ï Process pipes (CS) and line pipe (API 5L Gr 65) for KG-D6 project
„Ï Line pipe ( API 5L Gr 52, Gr 60 PSL 2) for East West Pipe line project
„Ï Offshore structural tubular for Heera Redevlopement & Marsk Oil Qatar Projects
„« Selection and supply of Coal Tar Enamel coating system and wiremesh for concrete coating for C-Series & Heera Redevelopement projects
„« Selection, design and supply of half shell bracelet type sacrificial anodes for UTPL, NRPOD projects

Tyco thermal Controls, India Design Center, Noida

* Design of sacrificial anodes & impressed current cathodic protection system
* Material selection at both quotation & detail design stage
* Supervision at site for installation & testing of CP system
* Preparation of proposals
* Techno-commercial discussion with prospective clients and recommendations

Project details:

„« Jamnagar Export Refinery Project (JERP) ¡V Reliance: Design, supply & installation of ICCP system for 128 above ground storage tanks & sacrificial anodes for tank internal
„« URAN Trombay Pipeline (UTPL) ¡V Design, supply & installation of sacrificial anode CP system. Monthly monitoring of installed CP system.

ICS-Electro Corr Damp Pvt. Ltd., Mumbai

* Witnessed & monitored corrosion testing (SSC, HIC, IGC & pitting) as per NACE & ASTM standards
* Third party inspection of line pipe & offshore coating system

Project details:

IWPP, Ministry of Health & Electricity, Oman
Fabrication, external & internal coating of 210 Km line pipe at M/s Welspun Gujarat Stahl Rohren Ltd., Anjar, Gujarat
„Ï Inspection of line pipe fabrication and material testing in compliance with API 5L & client specification
„Ï Inspection of external 3LPE line pipe coating & material testing as per DIN 30670 and repair by heat shrink sleeves
„Ï Internal solvent free food grade epoxy coating as per client specification
„Ï Inspection of coated pipes while being loaded for shipment

Indian Institute of Technology Bombay, Mumbai

* Performed routine materials and coating tests as per NACE, ASTM & client specifications
* Assisted in failure analysis of wide range of engineering system encompassing corrosion and tribological failures

Hindustan Petroleum Corporation Ltd., Mumbai Refinery

* Inspecting, measuring & recording the deterioration of material and to evaluate present physical condition of the static equipments for its soundness to continue in service
* Co-relating the deterioration rate with design life for further run
* Determining causes of deterioration and to advise remedial measures
* Recommending / forecasting short term & long term repairs & replacement to ensure further run length on the basis of economic and safety
* Advising on material requirement for recommended repairs/ replacement
* Inspecting during & upon completion of repairs
* Maintaining up-to-date inspection recordes and history of equipments
* Periodic corrosion monitoring by visual, ultrasonic, radiographic inspection and corrosion probes & coupons
* Periodic monitoring of underground piping cathodic protection system
* Assisting in review of WPS, PQR of CS, low alloy steel and qualified welders as per ASME Sec-IX
* Familiar with various NDT's like reviewing of radiographs, liquid penetrant test, kero chalk test (tanks), vaccum box test & boroscopy

Project details:

„« DHDS Shutdown
„Ï Inspection of heat exchangers and associated process piping
„Ï Assisted in failure analysis of 2205 Duplex SS heat exchanger tube sheet
„« FCCU shutdown
Inspection of pressure vessels i.e. Reactors, Regenerators & orifice chamber

ATTRIBUTES:

* Strong leadership ability & managerial capabilities
* Strong written & verbal communication skills with first class presentation skill
* Ability to work in a team environment

COMPUTER SKILLS:

* Windows XP, Window 98, Micorsoft outlook e-mail, word, excel spreadsheets for calculations and costing analysis, product database and data recording
* Auto-CAD, C-Programming

NATIONALITY: India
SEX: Male
MARITAL STATUS: Single
DATE OF BIRTH: 24 June 1980

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 7040)

Go to Search Parameters...

Brief Description

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

Flow Assurance Engineer

I am Graduated in M.Eng in Petroleum Reservoir Engineering from University of Calgary - Canada in 2006. I have more than two years of experiences in Research Institute of Petroleum Industry (RIPI), National Iranian Oil Company in reservoir simulation projects.

4 1/2 years oil & gas engineering experience (of which 3 years upstream) in conceptual, front end and detailed design.• Bachelor of Mechanical engineering, 2000-2004, from Visvesvaraya Technological University Karnataka, India with First Class.• Post Graduate Diploma in Petrochemical & Refining,

Procees Engineer With 5 Year of Exprience

Diploma Instrumentation, B. Tech Electronics(Appeared) , Skill in Automation Technologhy. Experties in Simens System, step7 , PCS7

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Instrumentation Design Engineer with 5 years experience in Petrolium,Oil&Gas,Fertilizer EPC projects. Knowledge of INtools,AutoCAD,Instrucal,PDMS,Flowel,conval. Knowledge of instrument specifications,loop drawings,JB schedule,INdex,I/O list,Technical Recommandations,Hookup,BOM,wiring

COMPUTER LITERATE MS Excel .MS Word. MS Power Point, (CMMS) Main Saver : JDE Edwards and Maximo & Electrical & Instrument Technician

B.Tech mechanical Mechanical Sr. Sales Executive in Leading MNC.

• Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation ,oil gas analysis ,3D interpretation , Well testing operation.

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out