Resume - M.E. (Welding Engineering),

Misco Jobs

Resume #63526

CONTACT INFORMATION:
View contact information...

Work Experience:

I Currently working with Petrofac E&C International Ltd as Welding Engineer
Since May 2007

Project: EPC Harweel Cluster Phase-2 facilities, Oman.

Client: SHELL / Petroleum Development Oman (PDO)

Present Responsibilities:

* Review of Contract documents to ensure identification and comprehension of Welding and related quality requirements.
* Co-ordinate the preparation of Project quality plans related to Welding.
* Involvement in Vendor, Sub-Contractor quality appraisals /audit/ surveillance/Inspection related to welding aspects.
* Liaise with Client Engineers at site as necessary.
* Provide welding coordination at site as necessary.
* Review/approve vendors /sub vendors quality plans, NDT, PWHT and other work procedures.
* Review/approve vendors/sub-contractor's PQR reports. Visit test house as required.
* Comment on Project Inspection and Test plan, relating to welding activities.
* Liaise with construction supervisors, welding Inspectors and quality personnel on welding/Quality matters.
* Monitor and review defect levels, advice and discuss remedial actions with the field construction Manager in conjunction with Site quality Manager.
* Ensure all welders are properly qualified in accordance with governing codes.
* Prepare QC summary reports and submit to Project Quality Manager/Site Quality Manager as required.
* Provide training support as necessary.

II. Worked with M/s Arabian Industries LLC, Muscat, Oman as Corporate

QA/QC & Welding Engineer from Sep -2005 to April -2007

A Brief about the Company:

An ISO-9001 certification company and bears Stamps for Manufacturing U, U2 & R stamped vessels. The company also bears stamps for Fabrication of pipes API 6A, 6D, 16A stamped. The Company involves in the field of Designing & Manufacturing of Heat exchangers, Pressure Vessels, Separators and fabrication of Piping for On-Shore, Off-shore application.

Work Profile:

* Preparation/ revision / updation of Welding & QA/QC related documents (WPS/ PQR/ WPQ/QCP etc) for pressure vessels, piping for On-shore & Off-shore, tanks etc.
* Attending Kick of Meeting/Pre-Inspection meeting with Client for the newly awarded jobs.
* Providing Technical inputs to the proposal during bidding.
* Effective implementation of QCP and WPS in the Shop Floor.
* Co-ordination with NDE/ PWHT/ Insulation / Painting Subcontractors for inspection.
* Liaison with client inspector/ ASME Authorized Inspector/ TPI for shop fabrication inspection activities.
* Training of shop fabrication personnel (Supervisors, Welders etc.) for improvement of technical competency.
* Review of material test certificates, quality records, weld history records, etc. and the compilation of final documentation.
* Guidance to shop quality control inspectors for shop surveillance for continual improvement.
* Shop surveillance for continual improvement.
* Conducting Internal Audit for the system Implementation as per ISO

Jobs handled
„« Carbon steel vessels (SA 516 Gr60/70) with SS316L clad and SS 3316L scrubbers for Lekhwair Gas Lift Compressor Project.
Client: Petroleum Development Oman / Bharat Heavy Electrical
Limited
„« EPC contract which includes Carbon steel vessels, Skid Piping CS, LTCS, SS and Structurals for Gas Treatment Plant Project.
Client: Petroleum Development Oman / Bharat Heavy Electrical Limited
„« Carbon Steel LP Vessels for Oman Refinery Company (ORC) Isomerisation Facilities Project.
Client: Consolidated Contracting Company (CCC) / Oman Refinery Company (ORC)
„« Various CS, LTCS and SS On-plot as well as Off-Plot Piping for Sohar Pressure Reducing Terminals Project.
Client: Mott McDonald / Oman Gas Company (OGC)
„« Engineering Maintenance Contract (EMC) which includes Piping CS, LTCS and SS for On-plot as well as Off-Plot, Repair Welding of tanks and vessels.
Client: Petroleum Development Oman
„« Carbon Steel Vessels and Tanks, On-Plot Piping work DSS for Kauther Gas Plant Project. DSS heavy wall thickness 48" OD with 40mm thickness welded with SAW first time in Oman.
Client: Petroleum Development Oman/ Petrofac.
„« On- Plot Piping Work CS,LTCS, Low Alloy Steel ( P4 and P91) and SS for Sohar Methanol Project 3000 MTPD
Client: Oman - Proman German
„« On- Plot/Off-plot Piping Work CS,LTCS, carbon steel vessels for Gas Pressure Reduction Terminal for Sohar Aluminum Smelter project.
Client: Oman Gas Company / Bechtel
„« Various thickness carbon steel vessels for Sea Water Fine Filter Project
Client: Maersk/Axsia, Qatar

III. Worked with M/s Larsen & Toubro Limited, Hazira, Surat, India as
Welding Engineer from Dec.2003 to Sep 2005.

A Brief about the Company:

An Indian Multinational Company having ISO9001 certification and bears Stamps for Manufacturing U, U2 & S stamped vessels. Specialized in the field of Designing & Manufacturing of Heat exchangers, Pressure Vessels, Reactors, Ammonia Converters, Steam drums, Boilers, Separators, Absorbers Etc. Equipment for nuclear, Aerospace, Defense Organization & Food processing and cement Plants.

Work Profile:

My Work profile includes the following,

* Preparation & Qualification of Weld Map, New Welding Procedures (WPS/PQR) as per Codes & Specifications.
* Selection of Welding Processes & Preparation of Shop Weld Plan &Test Plan (NDT)
* Qualification of Welder/Welding Operator as per Code and job requirements.
* Monitoring & Execution of Welding activities on Shop floor
* Trouble shooting in Shop floor and failure analysis.
* Selection, Estimation and Inspection/Testing of Welding Consumables.
* Undertake Research and Development Projects for Developing newer Welding processes and evaluate weldability of Exotic and difficult materials

During my work the following assignments have been handled

Sr.No Name of Job Customer/Client
1 E.O Reactor Dow Chemicals, USA
2 Hydro fining reactor Jacobs-Central Region

3 DHIS Reactor Fluor, Canada/ Exxon-Mobil

4 Hydro fining reactor Fluor, Canada/ Exxon-Mobil

5 DHIN-HDF Reactor Fluor, Canada/ Exxon-Mobil

6 HDS Reactor SNC-Lavalin/Petro Canada

7 MIDW reactor SNC-Lavalin/Petro Canada

8 Diolefin Saturator Lyondell-Citgo/Fluor Daniel

9 Scan fining Reactor Lyondell-Citgo/Fluor Daniel

10 Mercaptan Reactor Lyondell-Citgo/Fluor Daniel

IV. Worked with M/s Godrej&Boyce Mfg ltd, Mumbai-79, from
March-2001 to November 2003 as Dy. Manager (Welding)

A Brief about the Company:

An ISO9001 certification company and bears Stamps for Manufacturing U, U2 stamped vessels. Specializes in the field of Manufacturing of Heat exchangers, Pressure Vessels, Reactors, Ammonia Converters, Steam drums, Separators, Etc.

Work Profile:
* Preparation of Weld Map, WPS/PQR & Test plan (NDT)
* Qualification of welder/Welding operator (WPQ)
* Estimation of Welding Consumables
* Preparing Heat treatment cycle Procedure
* Co-ordinating with third party agencies
* Procuring welding consumables as per code as well as customer requirements
* Trouble shooting on shop floor.

Additional Qualification

* AWS-CWI Certified
* ASNT Level II (RT, UT, MPT, LPT)
* ISO 9001-2000 Lead Auditor Course Completed

Acquaintance with International Codes

ASME Sec VIII Div.1 and 2, ASME Sec.II- A, B and C, ASME Sec IX, PD 5500,
API 1104 and ASME B31.3,

Welding Processes handled

SMAW, SAW, GTAW, GMAW, FCAW, MCAW, ESSC, SASC, PULSED MIG

Materials Handled
„« Carbon Steels

(SA516 Gr 60/65/70, SA106GrB, SA333Gr6, SA105N, SA234WPB, SA350GrLF2,
SA420WPL6, API 5L Gr X42/X45/X52/X60/X65/B)
„« Low Alloy Steels (Cr-Mo Steels)
(1.25Cr-1/2 Mo (P4) & 2.25Cr-1Mo (P5A) with clad SS304L and SS321, 9Cr-1Mo (P91),
9Cr-1Mo-V (Modified P91) & 9Cr-0.5Mo-1.5W (P92))
„« Austenitic(304L,316L,321&347)/Duplex/Super Duplex Stainless Steels
„« Inconel

Computer Literacy

Application: MS Office (Word, Excel, Power Point)
Operating System: MS DOS

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 6742)

Go to Search Parameters...

Brief Description

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.

B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

xsteel detailer/checker

I possess a BS in petroleum engineering, and ten years of work experience with Core Laboratories as Special Core Analyst (SCAL), duties including: performing laboratory analyses of petrophysical and fluid flow properties, coordinating projects, data evaluating, and report generation.

MAINTENNCE SUPERVISOR /ENGINEER/ CORDINATOR/ MANAGER

M.E. (Welding Engineering),

Production optimisation,workover, well test,drilling

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

Professional DCS expert with 8 Years experience in process automation projects for pharma, oil & gas sector, Lead engineering and Project Engineering experience.

Mud engineer

Designer (In J Ray McDermott Engineering Services Private Limited, Chennai, From Aug. 2007 to Jul.2008

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

TO BE ASSOCIATED WITH AN ORGANISATION THAT PROVIDES CHALLENGES APPROPRIATE TO MY CORE SKILLS IN AN ENVIRONMENT THAT NATURES AND PROMOTES A CULTURE OF CONTINUOUS LEARNING AND GROWTH

Process Engineer

I worked five years of the oil field to the national company of geophysics (ENAGEO) in south of Algeria as land surveyor engineer and two years of the mining field to the company of the barite mines (SOMIBAR) in north of Algeria as engineer surveyor

Educational Qualifications:1. Master of Technology in IndustrialSafety Engineering from NIT, Trichy with 85% marks (8.5 CGPA) 2. B.E in Mechanical Engineering with 81.77%. Experinece: 1. From August 2006 to till now - Working as Safety Engineer in Mina Abdullah Refinery of KNPC

GIS Consultant

Instrument & Control System Design Engineer

I had worked as Development & Design Engineer in Jordan Petroleum Refinery for several years .My work includes Design of static and rotary equipment according to international codes.Also Im holding Master degree in mechanical Engineering that gives advantage to go through research and development.

Analytical Chemist in the field of QA/QC/R&D for Beverage and Water Treatment

Sr. Engineering Technician with 15+ years of industry experience at both Regional and Corporate levels. Highly proficient with Aries and Microsoft Office as well as an IT background.

Business Analyst-Information Technology

ATTENDING BREAKDOWNS IN PLANTS

6 yrs exp.in fired heaters of peroleum .involved in design /documentation & cordination with other discplines

Geologist with a very strong experience in most of the oil/gas drilling operations

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out