Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #6371 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION: M.Sc. Geology, University of Copenhagen (1995)

Geological qualifications: Sedimentology, Stratigraphy, Chemistry, Geophysics, Field work, laboratory work, reporting, field courses.

WORK HISTORY:

2005:
Geologist, Geo-Resources, Rotterdam for ImpreSup, Egypt. Route survey, Gulf of Suez

Geologist, Geo-Resources, Rotterdam for Fugro Nigeria. Route Survey. Niger delta

Geologist, Geological Survey of Denmark and Greenland (GEUS) for Amarada Hess. 3D seismic mapping at oil field Danish North Sea. Facies interpretation and modeling.

2004:
Geologist, Geo-Resources, Rotterdam for Fugro Nigeria. Route survey.Niger delta

Geologist, Geological Survey of Denmark and Greenland (GEUS). 3D seismic mapping at oil field Danish North Sea. Mass movement structures in the chalk Group.

2002 Geologist, Storestrøms County, Denmark. Raw material project, MEP, and GPR data

2001 Geologist, geophysicist, Geo-Resources, Holland. Site survey. Acquisition and interpretation of sparker seismic, Nile delta.

2001 Geologist, Storestrøms County, Denmark. Sand and gravel resources. Control area on a HEM project.

1998-2004 Geologist, research project Shallow seismic in the Danish waters - Fehmarn Belt, Skagerakk, Kattegat.

1997-1998 Geologist/geophysicist, research assistant Geological Survey of Denmark and Greenland (GEUS). Two projects. Side scan sonar interpretation. Mapping "stone reef" (till residual) and classification of acoustic facies. North Sea survey: preparing the survey, acquisition - and in-situ interpretation. Partly responsible of co-ordination with scientific partners.

1996 Research project, Shallow seismic in the Danish waters.

1995 Geologist, Geotecnical Institute, Lyngby.
Project on bridge connection, Fehmar Belt - Germany and Denmark. Sparker and sub-bottom profiling. Acquisition and responsible for interpreting the till facies.

1990-1994 Geological Survey of Denmark and Greenland (GEUS) and The Danish National Forrest and Nature Agency. Student job. Nine contracts (total 3400 hours). Student jobs. Side scan sonar, sub-bottom profiler, uni-boomer - preparing surveys, acquisition at the North Sea and inner Danish waters, sedimentological logging and seismic interpretation - 3 surveys. Bottom type mapping in all the Danish and western Swedish waters
1989-1990 Technical assistant University of Copenhagen, H.C. Ørstedsinstitutet, Kemi lab.III.

1979-988 Four projects in fine arts.

1975-977 Bricklayers assistant

1974-1975 National service.

COURSES
2005 Rifel shooting - survival - Unis, Svalbard, Norway.

2004 Survival(OLF standard) Grunnleggende sikkerhets- og beredskap. OLF standard. Fire fighting, helicopter- and platform- security. 5 days. Survival Esbjerg, Denmark.

1999 Interpreting shallow seismic facies associations. Involving a 3 month stay on British Geological Survey, Edinburgh, UK, and 5 month stay on University of Copenhagen.

1997 Offshore security. Fire-, helicopter- and platform- security.

1995-1999 Participation in quaternary geological seminars focusing on the quaternary deposits as a clime archive – Fridays at University of Copenhagen. – Leaded by Professor Svante Björck

1996 Copenhagen Teknikum. GIS. MapInfo. Duration 600 hours.

1996 University of The Balearic Islands, Palma de Mallorca. Principles of sequence stratigraphy - a field seminar on the island of Mallorca. July 1996. Leaded by Luis Pomar and Bilal U. Haq.

1993 University of Copenhagen. Master course in field mapping techniques with focus on carbonates, Rhodes, Greece.

1992 University of Copenhagen. Seismic stratigraphic and facies analysis of terrestrial and shallow water siliciclastics. November 1992. Leaded by Dr. D. Bradford Macurda, Jr. - Petroleum Infor-mation - Geoquest Training.

EDUCATION:
1988 - 1995: M. Sc., Geology, University of Copenhagen, Denmark. Subject of Thesis: Marine geology on shallow waters.

1976-1988: Autodidactic in design

1977-1979: University of Århus, DK. Institute of Geology.

1974: General Certificate of Education, Århus Katedralskole.

ADDITIONAL QUALIFICATIONS
Good insight in Danish environmental administration praxis. Good practical and logistic sense. Experienced in report writing. Good insight and experienced in working with form in design.

English: Written and oral. German: Working knowledge. Spanish: Understand "daily" Spanish. Understand Norwegian and Swedish

LIST OF PUBLICATIONS
Novak, B. & Björck, S. (2004) A Late Pleistocene transgression and depositional processes in the Fehmarn Belt, between Germany and Denmark, revealed by high-resolution seismic and lithofacies analysis. International Journal of Earth Science, 93, 634-644.

Novak, B. & Björck, S. (2003) Late Pleistocene and Holocene stratigraphy in a corridor between Fehmarn, Germany and Lolland, Denmark, revealed by decimetre scale resolution seismic and lithofacies analysis. Extended abstract (10 pp). Engineer Geological Conference, Christian-Albrechts-University, Kiel. Marts 2003.

Novak, B. (2002). Early Holocene brackish and marine facies and depositional processes in the Fehmarn Belt, between Germany and Denmark revealed by high-resolution seismic facies and lithofacies analysis. Marine Geology vol. 189/3-4, 307-321

Novak, B. & Björck, S. (2002). Late Pleistocene - early Holocene fluvial depositional processes in the Fehmar Belt, between Germany and Denmark revealed by high-resolution seismic facies- and lithofacies analysis. Sedimentology 49, vol 3, 451-466.

Novak, B. (2001). En kortvarig kraftig fluvial begivenhed i Femer Bælt og sydlige Kattegat - sen Pleistocæn eller tidligt Holocæn. Abstract: Speek in Danish Geological Society Annual Meeting, November 2001.Geologisk Tidsskrift December 2001.

Novak, B. & Stoker, M. 2001. Late Weichselian glacimarine depositional processes in the southern Skagerrak revealed by high-resolution acoustic facies analysis. Marine Geology vol. 178/1-4, 115-133.

Novak, B. & Stoker, M. 2000. Late Weichselian glacimarine depositional processes in the southern Skagerrak revealed by high-resolution acoustic facies analysis. Abstract: Speak at the Nordic Geological Winter meeting Trondheim - Januar 2000 on the same topic.

Novak, B. & Pedersen, G. K. 2000. Sedimentological, seismic stratigraphic and seismic facies interpretation of a Holocene spit-platform complex based on very high-resolution shallow seismic, Lysegrund, southern Kattegat, Denmark., Marine Geology vol.162/2-4, 317-337

Novak, B. 1998: Sedimentological, seismic stratigraphic and seismic facies interpretation in a Holocene spit--platform complex development based on very high-resolution seismic, southern Kattegat, Denmark. Poster: Littoral 98, Barcelona, September 1998.

Novak, B. & Björck, S 1998. Marine seismic studies in south Kattegat, with special emphasis on longitudinal bars and their relationship to a catastrophic drainage of the Ancylus Lake. GFF, vol.120. + Speak in Danish Sedimentological Society Marts 1997 on the same topic.

Novak, B. 1996. En maringeologisk undersøgelse af kvartære lag på Lysegrund, sydlige Kattegat, Danmark. Extended abstract. Geologisk Tids-skrift, hæfte 2, pp 21-25.

Nielsen, P. E. (ed), Kuijpers, A., Larsen, B., Cato, I., Kjellin, B., Jensen, J. B., Leth, J. O., Novak, B. & Nielsen, T. 1992. Bundtype-kort. Havbundssedimenter omkring Danmark og vestlige Sverige. Skov- og Naturstyrelsen 1992.

Novak, B. (submitted) A Late Pleistocene glacigene shoal interpreted from high-resolution seismic, sampling and diver observations, Lysegrund southern Kattegat, Denmark.

Design projects and fine arts:

B. Novak 1987 "FILM NO ONE", - curtains and rumdividers. Decorative products made from film strips. Atelier 53, Pile alle, Copenhagen-

B. Novak 1987: Collager. Publiceret Atelier 53, Pile Allè, København. B. Novak 1984: "13 collager". Galleri Clemens, Åbooulevarden, Århus.

B. Novak 1983: "Prima Largo" Lamp for tables. Glass, stone and metal. 50 nr/sign pieces. Galleri PBS, Grønnegade, Århus. Sold in DK, USA, CH.B.

Novak 1981. Separate exhibition. Gallery "Look Like Art ?". Arne Juel, Odense., DK

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2151 to 2200 of 7051)Go to Search Parameters...
Brief Description
Instrument Design engineer having 6+ yrs of experience
POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK
Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection
I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.
Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra
Experienced in Oil and gas projects.
Time served Electrical Engineer with 16th Edition qualification.
Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.
14 years experience in piping, pipeline and mechanical engineering within the oil and gas and petrochemical industries. Experience of all project phases including Estimation, Front – End Engineering, Detailed Design, Construction and Commissioning.
B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.
Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.
PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.
To work for a company in the petroleum/oil field that allows professional and personal growth.
A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.
Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.
I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.
Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.
Process Engineer working with DSM(Work Exp. 5 years)
Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis
High Voltage Electrical Testing and Commissioning and Electrical Start-up
I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.
Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)
EXPERIENCED METALLURGIST & INSPECTION ENGINEER
I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d
Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L
To obtain a position that suits my qualifications
To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.
Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development
Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi
Safety officer with more than four years experience in construction field and oil and gas
I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen
5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design
Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.
E&I Engineer
A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric
CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE
A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering
BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.
Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.
Pressure vessels, Heatexchangers and tanks designre
Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems
Manager, design systems, HSE mechanical service
Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction
I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.
outdoor field technician
Designer, Drafter
Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards
Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.
Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.
layout ,project management,model review
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   [ 44 ]   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com