CONTACT INFORMATION:
View contact information...
Personal:
A service oriented Electrical supervisor –able to establish and maintain good industrial relationships through mutual under standing and effective communication, having strong technical and faultfinding skills with a through working knowledge of electrical power systems and various electrical equipment in hazardous environment
Date of Birth& Age: 07.05.1964, 43 years
Nationality & Religion: Indian & Islam
Marital status: Married
Present Employer: Zakum West off shore complex, ADMA-OPCO,ABUDHABI,
Total no of years experience: 21 Years (5 years in Oil& Gas field &15years in Petrochemical field)
Technical skills in the following tasks:
Power system, high and low voltage Protection systems, Short circuit calculation, Discrimination study, Lighting systems, Rotating machinery, Generators, Motors, Switchboards,Frequency drives,Cable systems, Explosion protected equipment
Career skills:
Provides specialized technical guidance and support in Maintenance Engineering, troubleshooting and failure analysis of wide range of electrical equipment in the plant such as large generators, motors, transformers, switchgears and other distribution equipment and control systems
Highest Technical Qualification: B.E (Electrical and Electronics Engineering)
Basic Technical Qualification: D.E.E ( Diploma In Electrical Engineering)
Additional Qualification: Competency Certificate for Electrical Supervisors( C-License) Tamil Nadu Government Electricity Board, India
Training Course Undertaken
Off shore survival course from Gulf technical &safety training centre,Abudhabi Valid upto2009
Basic &Advanced fire fighting course conducted by DAS ISLAND fire and safety, Abudhabi
Permit to work system certified by ADMA-OPCO safety department
First Aid Course conducted by St. John Ambulance Association, Tamilnadu
General safe work practice field review leadership course conducted by ROB LAMEY,AP Regional safety specialist, CHEVRON TEXACO,Singapore
Commissioning Experience:
1)ADMA-OPCO, ZAKUM crestal gas injection platform(GIP) which comprises
* 11 KV ALSTOM T&D distribution switch gear panel for transformer feeder with GEC ALSTOM protection(MCGG,MCAG etc.,)
* Class AA,EFACEE make cast resin dry type transformer(2.5 MVA,11/.433KV)
* HOLEC capitole 40 with CLINK II ?p based automation system
* Gas turbine(Rolls Royce) and Gas compressors (Dresser Rand) auxilaries with ABB make VSD starter
* S&I MCC panel with motor and feeder manager II and 5M types
* 800 KVA Caterpillar-ABB make EDG with SR 489 MULTILIN protection relay
* Merlin Gerin CB electronic&Micrologic 6.0 type relay testing with ME type 34547 kit
* HOLEC AEROMAT ACB, Type SS up to 5000 A
2) Indo Jordan chemicals co, Jordan chemical complex turn key project with Krebs France, which comprises of
* 33KV Siemens panel, Bharat Bijilee transformer 10 MVA rating, 6.6 KV, ABB panel with vacuum contactor for motor feeders and SF 6 breaker for transformer feeders
* L&T MCC panel with ALTIVAR VSD up to 160 KW rating
Work Experience
From 2003 to Till date: Electrical Supervisor in Zakum west super complex(off shore)ADMA-OPCO,Abudhabi
From 2000 to 2003: Electrical Engineer in Southern PetrochemicalIndustries Corporation Ltd (SPIC) Tuticorin,Tamilnadu,India
From 1997to 2000: Electrical Supervisor in Indo-Jordan Chemicals company. H.K Jordan
From 1986 to 1997: Electrical senior Technician in Southern PetrochemicalIndustries Corporation Ltd (SPIC) Tuticorin,Tamilnadu,India
DUTIES/ RESPONSIBILITIES IN ZAKUM WEST OFF SHORE COMPLEX
* As Electrical Maintenance Supervisor have overall responsibility to coordinate repair, maintenance, and modifications of platform and to ensure that all electrical systems required for oil production and Exploration by condition monitoring.
* Coordinate and supervise as required the replacement, repair, installation, and/or testing of major electrical equipment and systems for platform and upcoming project requirements.
* Provide input as required to the Computerized Maintenance and Materials Systems (CMMS) such as MAXIMO so that all necessary areas of electrical, electronic, controls, and related items on the platform are properly addressed to the concerned
* Provide assistance in procuring adequate manpower, tools, training, and other resources required for proper operation and maintenance of all Electrical Systems.
* Provide technical assistance to fire &gas and instruments and its Technicians as required for Electrical Systems.
* Review the documentation as well as budgets for all repairs and procurement of major electrical equipment systems.
* Provide electrical system design, calculations, and drawings preparation/review for regulatory body submittals as required for platforms.
* Reviews and analyzes all subcontractor, and vendor quotations and reports for electrical work.
* Assists with interviewing, hiring, and supervising electrical maintenance personnel on board.
* Adopts company health, safety, and environmental programs and ensures implementation.
* Ensures and consistently adhered the company objectives, policies, programs, and procedures
* Prepare plant modification report (PMR),evaluate and implement with the vendor co ordination
* well head towers maintenance such as Power supply arrangement for pigging operation
Duties and Responsibility in SPIC
* Carried out Day to day Activities, PM Jobs, Routine and Non Routine Maintenance, Trouble shooting of Electrical Equipments in Hazardous Area location as per Standard maintenance Procedures.
* Carried out of Testing, Commissioning, Operation, Trouble Shooting and Maintenance Of The Following Equipments and Systems:
1. HT and LT Motors, Generators, Transformers and Switch Gears.
2. UPS, Battery Chargers, Batteries, Variable Speed Drive, Soft Starter, and Motor Operated Valves etc
* CMMS program execution in Integrated plant maintenance management systems
* Routine Maintenance, Trouble Shooting, Synchronizing and Normalizing the Power of Emergency Diesel Generators.
* Experienced in plans review and resource allocation
* Experienced in material identification, PR, PO, vendor selection and service selection and budgeting
* Involved in technical evaluation
* Involved in technical support of daily and T/A maintenance activities
* Preparing detailed repair and overhauling scope of all electrical work
* Preparing maintenance procedures according to vendors schedule
* Experienced the following activities during Annual Turnaround (ATA), yearly PM jobs, Shutdown jobs and commissioning.
1. Transformer Terminal, Bushing Inspection, Function Test of OLTC, Buchholz relay, Temp.gauges and cooling systems. Silica gel Replacement, Oil Top up, BDV Test, Tan Delta Measurement, Dissolved Gas Analysis and Oil circulation by Stream line oil purifier machine.
2. HT, LT Motors Overhauling, Air Gap Measurement, Bearing Replacing, pedestal insulation checking and Inspection, Vibration check up, Inspection of Terminals and feeders and Shaft Voltage Measurement.
3. Generators overhauling, Terminal Inspection, Air gap measurement, Bearing Inspection, Rotating rectifier unit Checkup, Excitation and Synchronization Unit Check up.
4. Meggaring, PI value, Winding Resistance Measurement and Tan Delta Test for Transformers, Generators, HT Motors and Hypo Test for Feeders and
Partial discharge online monitoring system for Generators / HT Motors
5. CT, PT Polarity Checking, Knee Point Voltage Measurement, CT Ratio Group Test by Primary Injection Test and Protection Relay Test by Secondary Injection.
6. Breakers Inspection, Function Test, Contact Resistance and Travel Measurement, SF6 Gas pressure Checking, Vacuum Checking, and MOCB overhauling respectively. And Air CB Carbon Impression Checking and Testing of Magneto thermal release by Current Injection.
7. HT and LT Panel Shutdown Maintenance and Modification Jobs.
8. Battery bank Efficiency Checking by Charging and Discharging Test
* Involved New Projects follow-up, Equipment's Upgradation, System Modifications Jobs and Drawings updating.
* Spares Maintaining and planning, Equipment Failures analysis and Maintaining Equipments history.
* Having Approval for the safe application of Permit to work systems, and Isolation - De-isolation procedures.
Summary of Equipments Handled In Oil & Gas and Petrochemical Field
Switch Gear Panels:
* Mitsubishi, Asia Sweden,GEC,, BRUSH, ABB and MerlinGerin High Voltage Panel with System Voltages of 33KV, 11KV, 6.6KV and 3.3KV.
* Siemens, ABB,S&I, Field & Grant,Laurence Scott Electric Motors,GEC, Larsen&Toubro and Holec 415V Low Voltage Panel of Power and Motor Control Center
Breakers
* ABB, Mitsubishi, MerlinGerin 36KV, 12KV and 7.2 KV SF6 CB and rating up to1600A.
* Maiden and Kirloskar Asia Make 12KV, 3.6 KV Vacuum and MOCB CB rating up to 1250A
* ABB vacuum contactor and MerlinGerin SF6 contactor rating of 650A for 6.6 KV, and 3.3 KV Motor Feeders.
* Holec AEROMAT ACB rating upto 5000 A with Electronic Trip Relay
* MerlinGerin, and Larsen&Toubro Air CB rating up to 3200A with Magneto-thermal solid-state release& Micro logic verson6.0 trip relay
Protection Relays
GEC English Electric Static and Electro-Magnetic Relay and ABB SPACOM relay for
* Motor Protection
* Transformer Protection
* Generator Protection
* Feeder Protection & MOT PRO relay for motor protection and familiarized in Merlin gerin electronic relay and GEC relay testing
Motors
* Fuji make, 11kv 1850Kw rating Synchronous Motor and BHEL make 3.3KV, 675 KW Slipring Induction Motor
* NGEF Make 3.3 KV, 6.6 KV HT Motors rating from 200 KW to 850KW.
* Leroy Somer, ABB, Siemens,Brook Hansen, Crompton Greaves and NGEF LT motors Capacity up to 160 KW for Booster oil Pumps, Instrument Air Compressors and Fresh water pp etc.
Transformers
* Operation and Maintenance of 110KV outdoor yard including 2 Nos of
* 110KV/ 11 KV, 30 MVA Transformers (HHE Make) with MULSIFYING System.
* Bharat Bijilee, Powels Make Power Transformer with On Load Tap Changer and system Voltages of 33KV/11KV, 33KV/6.6 KV, and capacity of Up to 30 MVA.
* Powels, NGEF, Bharat Bijilee,Mora, CEM,Hawker Siddeley, Kirloskar Make Distribution Transformers with off load Tap Changer and system Voltages of 33KV/415V, 11KV/3.3KV, 11KV/415V, 6.6KV/380V and Capacity from 1.6MVA to 10.5 MVA.
Generators
* GEC Frame5, 6 and Ruston Gas Turbine Generator and its auxiliaries.
* 11KV, 13 MW, 6MW and 5.4 MW Fuji Make Steam Turbine Generators Maintenance and Operating With National Grid.
* Jeumount Industries 6.6 kV, 12 MW, Steam Turbine Generator and Export to the Grid
* Cummins, Leroy Somer and SKL Diesel Generators 11KV and 415V,
* Up to 1100KVA for Emergency Power Supply.
UPS, Batteries, Battery Chargers, VSD'S and MOV'S.
* Gutor make UPS Parallel Redundant system up to 100KVA with By Pass Mains and 1250 Ah Nickel cadmium Battery Bank.
* Auto Start of Diesel Generators and Boiler Soot Blower motors
* 220V, 125V and 24V DC System Battery Chargers.
* Nickel cadmium and Lead Acid Battery bank up to 220V DC and 1650-Ah capacity.
* Rotork,Limitorque&BIFFI make Motor operated Valve actuators.
* Tele-Mechanique Make Altivar66 Series Variable speed Drive rating range from
* 2.2KW to160KW
Computer Skills.
* MS office (Word, Excel, Power point & Outlook)
View contact information... |