Resume - 13 years experience in oil, gas and petrochemical industrial dealing with instal...

Misco Jobs

Resume #63931

CONTACT INFORMATION:
View contact information...

Experience Summery
13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabia & Qatar.

Certified as Vibration specialist Category II from Vibration Institute-USA
Certified as Welding Inspector CSWIP 3.1 from Welding Joining Society TWI- UK
Certified as lifting equipment inspector from Lifting Equipment Engineering Association LEEA-UK

Experience also includes execute alignment, re-balancing, vibration analysis, review the equipment performance, perform reliability, availability and MTTF analysis for the rotating equipment, preparing the operating and capital budget, preparing the purchasing requests with the technical specification of the equipment and spars parts. Implementing of preventive, predictive and corrective maintenance strategies, implementing the highest philosophy of CMMS to achieve lower costs and higher process reliability. Perform visual inspection and proof load testing of lifting equipment and heavy construction equipment, thorough knowledge on RCM, API, ISO, and BS standards.
Employers
Bureau Veritas From Jan. 2006 to Present
Rotating Equipment Engineer Location: Qatar
Germanischer Lloyd From Nov. 2005 to Dec. 2005
Mechanical Inspector (QC/QA) Location: Qatar
Bureau Veritas From July 2005 to Aug. 2005
Vibration Specialist Location: Qatar
Suez Oil Company From Aug. 1995 to July 2005
Rotating Equipment Engineer Location: Egypt
Arab Egyptian Contractor From Oct. 1994 to Aug.1995
Construction Engineer Location: Egypt

Part Time Job
Centruion Petroleum Co. From Feb. 2004 to July 2005
Mechanical Consultant Engineer. Location: Egypt
The work cycle is one week on and one week off as the opposite work cycle in Suez Oil Company
Alstom Power Italy From Feb. 2002 to May 2002
Mechanical engineer Location: Saudi Arabia
Holiday without payment from Suez Oil Company to work with Alstom
Education
Master Degree in mechanical engineering from Oct.1996 to Feb.2002
B.sc in mechanical engineering from Sep.1989 to May 1994 with general grade Good and Excellent grade for the graduated project
Additional Qualifications
Certificate in Vibration specialist Category II from American Vibration Institute, USA Certificate No. 0610-3985A Valid till 31-12-2011 on Nov. 2006
Certificate in Welding Inspection CSWIP 3.1 from Welding Joining Society TWI- UK on Jan., 2007
Certificate in Lifting Equipment Inspection part 1 from Lifting Equipment Engineering Association LEEA - UK on April 2006
Certificate in Lifting Gear General from LEEA–UK on April 2006
Certificate in Lifting Gear Power from LEEA – UK on April 2007
Certificate in Runways & Light crane structures from LEEA – UK on April 2007.
Very good Computer skills (Word, Excel, PowerPoint, Ms Project, Visual basic, Visio Tech. Internet)
Published papers
" Investigation of turbulent heat transfer and fluid flow in longitudinal rectangular-fin arrays of different geometries and shrouded fin array" published in Experimental Thermal and Fluid Journal on 8, October 2002, Volume 26 Pages 879-900, web site www.elsevier.com.
" Experimental study of heat transfer and fluid flow in longitudinal rectangular-fin array located in different orientations in fluid flow " published in Experimental Thermal and Fluid Journal on 1, December 2004, Volume 29 Pages 113-128, web site www.elsevier.com
Professional Experience
1- Bureau Veritas (Qatar) from Jan. 2006 to Present
Position: Rotating Equipment Engineer
Duties:
On behalf of Bureau Veritas Provide technical assistance for different clines at Qatar as RasGas,
QVC, United Ready Mix, Shell Qatar, QXY, Trags, Dopet, Cape East related to inspection, installation, Maintenance, troubleshooting, overhauling, alignment, re-balancing, vibration analysis, reviewing the equipment performance, performing the reliability, availability, MTBF analysis and Root-Cause analysis for chronic problems for the rotating and static equipment.
Technical support for RasGas shut down group during plant shut down.
Third party inspection, testing of various lifting equipment such as tower crane and overhead traveling crane, pneumatic hoists, electric hoists, runway beam, offshore & onshore containers, transportation baskets chain blocks, polyester webbing slings, wire rope slings, shackles.
Issuing certification & documentation in accordance with the relevant British & International standards
Third party inspection, testing of various heavy construction equipment such as crane, excavators, loader, water tanker, rollers, compactors, tipper trailer, dozer, drilling rig, forklift.
Reviewing the NDT reports of critical welds on various load-bearing points of lifting equipment and also lifting lugs of the containers.
Witnessing pressure testing on hydraulic and pneumatic systems equipment as per the customer's specifications and approved procedures.
2- Germanischer Lloyd (Qatar) from Nov. 2005 up to Dec. 2005
Position: Mechanical inspector (QC/QA)
Work with Technip (Italy) on behalf of Germanischer Lloyd as QC/QA engineer during construction phase at ORYX GTL project at Ras Laffan, Qatar
Duties:
Responsible for all multi-discipline inspection activities during construction phases for Rotating equipment (air coolers, pumps, cooling towers, generators, compressors), Lifting Equipments (Overhead Traveling Crane) and static equipment (vessels, heat exchangers, boilers, flare system)
Preparing the punch list for defect points.
Monitoring for final completion of the work.
3- Bureau Veritas (Qatar) from July 2005 up to Aug. 2005
Position: Vibration specialist
Work with Qatar vinyl company (QVC) at their project at Mesaieed industrial city, Qatar on behalf of Bureau Veritas to carry out vibration survey for their rotating equipment and investigate the chronic vibration problems.
Duties:
Carried out vibration analysis for all rotation equipment (gas turbines, gas & air compressors and pumps) using condition-monitoring system (Odyssey software and Data Pac 1500).
Investigated the chronic vibration problems & issued support reports & recommendations to overcome the problems.
4- Suez Oil Company "Suco" (Egypt) from Aug. 1995 to July 2005
Position: Rotating Equipment Engineer
Suco is major joint venture petroleum company between EGPC (Egypt) & Deminex (Germany). Suco has gas & oil separation plant, gas injection plant, PLG plant, Power generation plant and three platforms. Suco main office located at 21 Ahmed Orabi St., El- Mohandsen, Cairo, Egypt.
Duties:
Supervises on execution of day-to-day preventive and corrective maintenance activities related to gas processing plant, oil plant, power plant and desalination plant.
Carrying out inspection, maintenance, overhauling, operating and troubleshooting for rotating equipment as gas turbines (Ruston TB 5000 & Solar Centaur type H), centrifugal compressors (Dresser- Rand, Sulzer, Solar & Elliott), reciprocating compressors (Ajax DBC 800 & Ariel JGK/4), Screw compressors (Kaldair), centrifugal pumps (Dresser-Rand, David Brown, Worthington & Ingersoll-Rand), reciprocating pumps (Desapro Milton Roy & FMC), gas engine (Waukesha VHP L 7042 GSI) Diesel engine (Cummins & Volvo), Air fan coolers (OLMI & I.M.S.), glycol & water heaters (K.T.I.), pressure vessels (I.M.S), valves (Ball, Gate, Globe, and Check), LPG loading arm (FMC), desalination plant (wear westgars ), deluge systems (Wormald)
Carrying out vibration data collecting, vibration analysis, reporting, and failure analysis for rotation equipment using condition-monitoring system (IQ 2000, Odyssey software and Data Pac 1500).
Carrying out alignment job for all rotating equipment by using Face & Rim method, Reverse method and by using laser devices.
Carrying out re-balancing for rotating equipment in one plane (static un-balance) and two planes (dynamic unbalance).
Prepares and issues the maintenance policies and strategies including determination of equipment criticality and defining necessary rules and analysis required for best maintenance type for each system.
Implementing reliability centered maintenance (RCM) to achieve lower cost and higher process reliability
Carry out hydrostatic test for static equipment (hear exchangers, pipelines and vessels).
Issue the work permit for schedule and un-schedule jobs.
Preparing total shutdown plans and estimates the required resources (manpower, spares& tools).
Reviewing the equipment performance to ascertain status, performing reliability and availability analysis and recommending optimum method to deal with chronic problems.
Preparing the maintenance operating and capital budget.
Review packages for new projects and recommends on equipment selection and redundancy and participates in equipment review and proposed new solutions alerts on adolescence of equipment.
Provide technical support to operations crew
Ensures that adequate provision is made for the availability of spare parts and materials for all maintenance work including the periodic review of stores 'stock holdings' and the identification of ordering of direct materials.
Assists in developing maintenance programmers for major overhaul of rotating equipment and installations with the objectives of achieving high service factors at optimum cost.
Creates necessary support document to follow equipment history, MTBF analysis, Maintenance reporting for major equipment overhaul.
Analysis of equipment history data in terms of failure and spare parts consumption.
Implementing the company health, safety and environment management police (HSE) and loss control system activities.
5- Arab Egyptian Contractor (Egypt) from Oct. 1994 up to Aug. 1995
Position: Construction engineer
A.E.C. is Arabic company work for construction of water plant, firewater plant and sewage treatment plants located at "1" Hamadan st., Giza, Egypt.
Duties:
Implement engineering studies and supervision on construction of water plant, firewater plant and sewage treatment plants as Alexandria firewater plant, Marsa Matrooh sewage treatment plant.
Part Time Jobs
1- Alwastani petroleum company "Wasco". (Egypt) from Feb. 2004 up to July 2005
Position: Mechanical consultant Engineer.
Wasco is joint venture company between EGPC (Egypt) and Centruion Company (Canada). It has liquidation natural gas plant (LNG). The main office located at Zahraa El Maadi, Cairo, Egypt.
The work cycle is one week on and one week off as the opposite of my work cycle in Suco.
Duties:
Supervision on installation, commissioning and start up for three Arial reciprocating compressor with their drive gas engines type Waukesha model VHP L 7042 GSI
Implement on job training courses for maintenance staff for all mechanical equipment in the gas-gathering unit.
Reciprocating compressor performance evaluation to adapt the gas overhaul production with gas well production.
Create a computerized maintenance management system "CMMS" for the company equipment.
2- Alstom power Italy (Saudi Arabia) from Feb. 2002 up to May 2002
Job Title: Mechanical engineer
Holiday without payment from Suco to work with Alstom at their project (Shoaiba steam power generation plant, 5 X 393 MW) at Kingdom of Saudi Arabia
Alstom is multinational company work for construction and maintenance of power generation plants located at P.le Lodi, 3, 20137 Milano, Italy.
Duties:
Supervision on installation, commissioning and maintenance of centrifugal pumps, steam turbine, and water boiler.
Professional Membership
Membership in American Vibration Institute, USA
Membership in Lifting Equipment. Engineering Association LEEA- UK
Membership in American Chemical Institute, USA
Membership in Welding Joining Society TWI- UK
Membership in Egyptian Society of Petroleum Engineers.
Membership in Egyptian Society of Engineers.
Training Courses
Attended several courses covering the following subjects (certificates are available)
Technical Training Courses;
Machinery vibration analysis (Vibration Institute)
Wilding inspection CSWIP 3.1 (TWI -UK)
Operation, maintenance & troubleshooting of gas turbine (HIS)
Industrial compressors (MERIT)
Diesel engine overhauling (Society Cooperation of Oil).
On alignment (SKF).
HSE Training Courses;
L.P.G. Safety (ICEMEC).
Safety introduction / H2S Awareness (Q-Chem)
RasGas Safety introduction (Qatar international safety center)
RasGas-H2S /BA (Qatar international safety center)
RasGas-PTW – Signatory (Qatar international safety center)
Computer Training Courses;
Microsoft excels (SUCO in-house training center).
Microsoft Windows (SUCO in-house training center).
Microsoft access (SUCO in-house training center).
Microsoft visual basic 6.0 (SUCO in-house training center).
Management skills Training Courses;
Technical language and report writing (American University)
Personal communication. (MADAC)
Middle level of management development (MAHARAT).
High level of management development (MADAC).
English language (MPC)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 7051)

Go to Search Parameters...

Brief Description

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

Workover & completion supervisor

Over 20 years of experience in Plant Operations or Maintenance.

I possess over 15 years’ of experience in Project Management, Instrumentation & Automation, Operations & Maintenance, Installation & Commissioning and Man Management.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Instrument Engineer/Inspector

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Welding Engineer Specialist

Wellhead, X'mas Tree, Valves, Operations

Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants

28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

I want drilling supervisor/Rig superintendent job

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

Over 12 years experience in oil and gas industry

As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out