Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #63936 next resume »»
CONTACT INFORMATION:
View contact information...

Date of Birth: 2nd August 1961
Place of Birth: Amman-Jordan
Nationality: Jordanian
Marital Status: Married with 4 Children

Academic Qualifications

Degree Subject Insitute Date

Bs.c. Geology Jordan University 1984
Ms.c Geology/ Geophysics Jordan University 1986
Ph.D. Geology/ Geophysics Jordan University 2000

Languages

Arabic Mother Language
English Language of instructions in Bs.c., Ms.c and Ph.D.
German 6 months course at Goethe Institute/Germany

Academic Experience

* Research and teaching assistant/Department of Geology/Jordan University 1984-1986.
* Teaching assistant/Department of Earth and Environmental Science/Yarmouk University, 1984-1986.
* Maintenance of the Jordan Seismoligical Station (UNJ) including the analysis of certain selected events 1983-1986.
* Participating in execution of the 1984 deep seismic sounding experiment that was jointly organized between the Universities of Jordan, Karlsruhe and Hamburg.
* Training course on seismological data analysis and interpretation, Baghdad University-Iraq, 1985.
* Computer programming course at Jordan University in 1987.
* German Language cource at Goethe Institue in Mannheim-Germany 1988.
* Researcher at the Geophysical Institute, Karlsruhe University-Germany 1988-1990.
* Teaching Geophysics and Computer at the Royal Jordanian Geographic Center 1991-1992.
* Working on many consultations on geology and geophysics for some Jordanian Authorities 1992-1995, through the Research and study Center at the Jordan University (i.e Dam-site investigation at Adasiya area/north of Jordan; Groundwater studies of Zarqa-Main area/Dead Sea-Central Jordan).
* Windows, Excel, Graphics, Design, Internet, Wep site publishing course 1997.
* Special interest in the field of earthquake seismology; seismic data analysis, earthquake location problems. Intensive use of Hypo71, IASPEI, Hypoiverse, SEISAN programs...etc.
* Good experience in explosion seismology, modling with 1-D and 2-D ray tracing technique.
* Good knowledge in applied geophysical software; extensive use of Resist, 4-pole, IPI, Gravpoly, Surfer, Grapher.. . etc.
* Consultant on infrastructure project at Khalifa city in Abu-Dhabi/2002.
* Ditector of the Geological Research Center / Amman 1996-2006.

Academic Work

Abou Karaki, and Hasweh, N. 2001. Three-dimensional distribution of the magnithde-frequency relationship along the Jordan-Dead Sea Transform. Seventh Jordan Geological conference, ( accepted April, 2001 ).
El-Isa. Z. and Hasweh, N. 1988. Seismicity of the southern Jordan-Dead Sea Transform, proceedings of the 3rd Arab seismological workshop, 8-10 march 1986, PP 47-55, King Saud University, Riyadh.
El-Isa. Z. Mechie, J. Prodhel C. Makris, J and Hasweh, N. 1986. The Jordan Dead Sea Transform: crustal and seismicity. Gulf of Suez and Red Sea Rifting Hurgada, Oct. 19-26, Abstract.
Hasweh, N. 1986. Seismicity of Wadi Araba-Dead Sea Region. Ms.c thesis. University of Jordan, 159pp.
Hasweh, N. 2001. Seismicity of Carmel Wadi El-Fara'a Fault system. Ph.D. thseis. University of Jordan, 261pp.
Hasweh, N. 2001. Reservoir-Induced earthquaks, Geoscience and Arab Development, No.1-2, 52-53 p. Baghdad-Iraq.
Hasweh, N. 2001. A note on the seismicity of the Jordan-Dead Sea Transform. Geoscience and Arab Development, No. 1-2, 54-55 p. Baghdad-Iraq.
Hasweh, N. 2001. Importance of geophysical methods in environmental studies. Submitted to the Jordanian environmental watch, Amman.Jordan.
Hasweh, N. 2007. Seismic moment and energy fluctuation beneath Jordan-Dead Sea Transform, In preparation.
Hasweh, N. 2007. Fault plane solutions and evidence of shear movements along Jordan-Dead Sea Transform, In preparation.
Hasweh, N. 2007. Computer determination of earthquake hypocenter: A simplified version of Hypo71 and hypoinverse programs, In preparation.
Hasweh, N. and Abu-Hamideh, K. 1999. Vertical electrical sounding of the proposed Wadi Madoneh solid waste disposal site. GRC, Internal report.
Hasweh, N. and Abu-Hamideh, K. 1999. Horizontal electrical profiling of the proposed Wadi Madoneh solid waste diposal site. GRC, Internal report.
Hasweh, N. and Abu-Hamideh, K. 2000. Geoelectrical studies of the area south of Aqaba city, GRC internal report.
Hasweh, N. and Abu-Karaki, N. 2001. On the seismic activity of the Erythyrean fault system; An example of the Carmel-fault system. Seventh Geological conference (accepted April, 2000).
Hasweh, N. and Abu-Hamideh, K. 2000. Geoeletrical investigation of the proposed solid waste disposal site, First Jordan Environmental conference. (Abstract)

Membership of Academic Organizations

- Jordan Geologists Association, Amman-Jordan.
- Arab Geologists Association, Baghdad-Iraq.
- Seismological Society of America, Berkely, California.
- Jordanian environmental watch, Amman-Jordan.

Professional References
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 401 to 450 of 7040)Go to Search Parameters...
Brief Description
16 years of experience as a water treatment chemist in Power Plant.
Drilling Fluids Engineer 38 years worldwide experience both in Field and Management
Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.
Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.
Well Services, Well Interventions, Completions
PhD in Geophysics, excellant in computer ,
Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site
I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist
Over seventeen years of experience in the Oil & Gas Construction
Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)
Status Qualifications and employment history Education Foreign Languages
Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical
Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.
post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati
Sr. Electrical Designer with 15 yrs experiance including PDMS
Expert in PDS Fameworks, Microstation, PDMS and bentley Structural Triforma
Civil/Structural engineer with 14 years experience in oil 7 gas industry
Well Test Engineer
Senior PDMS Piping Designer/Checker
Electrical engineer with experience in oil and gas maintenance, installation, procurement, materials sales and marketing
Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry
Thirty-five years of detail design / checking in the petrochemical / refinery and fertilizer engineering field. Piping work includes preparing detail design drawings, punch list during construction, material take offs, labor cost estimates, manpower estimated, developing P&ID drawings.
Having 18 years of work experience in Project Management / Constrcution / Fabrication
Instrumentation and control senior / lead engineer
Petroleum Engineer
As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).
Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.
Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.
Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.
Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.
Seismic data processing /reservoir simulation software developer
19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects
Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent
Project Management
Control Systems Specialist
17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes
Instrument supervisor / foreman
Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals
Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.
25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.
Drilling fluid superintendent / supervisor ( mud, cement, waste management)
I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.
I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.
Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field
Instrument / Controlsystems Engineer
Geologist geophysicist interpretation
Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.
To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti
I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management
First   1   2   3   4   5   6   7   8   [ 9 ]   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com