Resume - Instrumentaion and control system enigineer with DCS experince

Misco Jobs

Resume #64148

CONTACT INFORMATION:
View contact information...

Education & Qualification: -
B.Sc. Of Electrical Engineering (Electronics and Communications Discipline)
Obtained from: Faculty of Engineering

* English Language Proficiency: - Very Good

* Computer Skills: - Excellent

EXPERIENCE
JULY. 2007 UNTIL NOW:-
Company name:MW KELLOGG UK
Position: DCS Engineer
Responsible for: SEGAS LNG PROJECT Software & graphic development for the DCS system
JAN. 2006 JULY2007: -
Company name: YOKOGAWA ENGINEERING MIDDEL EAST (UAE, DUBAI)
Position: Senior System Engineer
Responsible for:
* EPCL (ENOC Processing Company L.L.C. (EPCL), Yokogawa DCS, (CS3000R3), Functional Design Specifications& design, complete engineering phase, FAT and IFAT.
* Prepare function design specification for DCS system
* Conduct and plans for new project /upgrading, designs, studies all document/drawing and gives comments
* Lead system engineer for SHARQ revamping project in SABIC 2EG plant Yokogawa DCS, (CS3000R3 Vnet/ip)

JAN. 2004 JAN. 2006: -
Company name: EMERSON PROCESS MANAGEMENT
Position: Instrumentation and control system engineer
Responsible for:
* Software & graphic development for the deltav DCS system.
* Installation & pre-commissioning & commissioning of the deltav DCS,
* Participate in EMERSON maintenance contract with Egyptian LNG contract (deltav DCS)
* Well acquainted with EMERSON ASSET MANAGEMENT SYSTEM(AMS)
* Well acquainted with foundation field bus.
* Trouble shoots of instruments, microprocessor bases instruments, conventional and modern PLC based control system, data logging systems, receiver systems.
* Executes, maintains and repairs instrument equipment.
* Supervises, coordinates & monitors the maintenance of all instruments & their controls.
* Plans preventative maintenance in advance and compiles recommendation.
* Works with senior engineers, directors to develop and completion of complex and difficult projects.
JAN. 2003 JAN. 2004:-

Company name: GIZA SYSTEMS
Position: system engineer for Pro-safe PLC and CS3000 DCS
Responsible for:

* Pre-commissioning, commissioning and start up of "SEGAS LNG PROJECT"
Independently on YOKOGAWA CS 3000 system for complete plant automation.
* Software & graphic development for the DCS system.
* Responsible for training the SEGAS operation staff on YOKOGAWA CS 3000 SYSTEM, communication package.
* Installation & pre-commissioning & commissioning of the DCS I/O cards & prosafe PLC safety instrumented system (SIS) Emergency shut down system (ESD), fire & gas system.
* Well acquainted with serial links communication (MODBUS &OPC over (TCP/IP) )
* Assist in establish the interfacing communication between the yokogawa DCS and 3rd party vendors via RS485 serial links using MODBUS protocol or by OPC over TCP/IP.
* System configuring of safety interlock using SFC (sequence function chart) & logic chart & sequence table.
* Well acquainted with YOKOGAWA plant resource manager (PRM)
JAN. 2001 until JAN. 2003:-

Company name: EL ALAMIA for Plasticizers & Solvents (EPS)
Position: Instrument maintenance engineer "control sector"
Responsible for:
* Maintenance of: DCS, Yokogawa (CS3000)], PLC and field instruments.
* Pre-commissioning, commissioning and start up of "NEW PLASTICIZING UNIT material used in PVC" which includes Yokogawa CS3000 DCS.
* Worked independently on YOKOGAWA (CS 3000) System for complete plant automation.
* Provide specialist technical support to all processes in instrumentation and control activities.
* Software & graphic development for the DCS & PLC right from the scratch to commissioning.
* Regular maintenance of the field instrument used in process industry.
* Calibration, pre-commissioning, commissioning, installation of the field instrument, Temp. Measuring inst., smart transmitter, DP pressure transmitter, Level transmitter, Rota meters, and Flow meters.
* Start up & shutdown of the plant.
* Soft ware development, graphic generation, commissioning and installation of DCS, PLC system, loop testing, checking
* Generation the required document for the DCS/PLC commissioning.
* Ranging, configuring &calibration of YOKOGAWA transmitters as per the plant requirement, control configuration.
* Well versed with HART / BRAIN type smart transmitter & configuring it with HART / BRAIN communicator.
* Installation & commissioning of all types of control valves &cable laying & wiring connection.
* Installation & commissioning of ESD SYSTEM (HIMA PLANNER 4).
* Installation & commissioning of field isolation system (P&F system)
Training:-
„Ï Reverse Engineering for 5 days
„Ï Advanced Process Control10 days
„Ï DCS,PLC &SCADA 10 days
„Ï Valve sizing for 5 days
„Ï Practical training in PETROJET company
„Ï Practical training in Mansoura U & Kidney disease center
„Ï Maintenance Engineer in Saudi Arabia & Egyptian for Marb
Skills
* Operation platforms: Windows NT 4.0 workstation, windows 2000 professional, windows XP professional, windows 9X and MS-DOS.
* Application package: MS-office 97/2000.
* Engineering package: yokogawa automation software.
* Good knowledge of Network essentials.

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 6635)

Go to Search Parameters...

Brief Description

Cathodic protection engineer with 7 years exp. with every aspect of C.P,Well versed with NACE and other Interntional and Industry specific stds

Pipeline engineer and Stress analyst (CAESAR II)

Worked as Rotating Equipment Engineer for various types of rotating equipments for refineries, petrochemical and nickel-mining plants in compliance with the project specifications, clients’ requirements and international codes and standards. Field engineering works during construction stage related

I am Junior Piping Designer with PDMS skill

My experience include but not are not limited to ensuring and maintaining healthy, incident and injury-free environment, as well as implementing the company’s safety policies and procedures.

Hse speciality

I am 32 years old, male, married, a university graduated on Offshore Engineering Dept. of ITS (Sepuluh Nopember institute of Technology) Surabaya. I have been working at some Batam shipyards since 2001. Presently, I am working as Project/Piping Engineer. Additionally, I’ve some computer skills.

MS Degree drilling engineer with 4 years of experience in oil and gas industry. A motivated person with good team work skills and experience in multi-national projects and environment. Looking for position of Night Drilling Supervisor or Wellsite Drilling Engineer on/off

BE in Mechanical Engr

A Safety Engineer working at Dolphin Energy Ltd.

Geophysicist

Instrumentaion and control system enigineer with DCS experince

Mechanical engineer, autocad, offpipe, microsoft

Process Engineer

PDMS piping designer with 8 years practical experience

I am having 11+ years of experience in Structural Detailing, checking. Major experience is in Oil & gas, Offshore sector. Knowledge of Autocad, PDS.

Well qualified 3rd class Engineer with 2 years marine experience in offshore. Motivated, hard working, responsible, reliable and productive, proven ability to deliver high quality of work and excellent shipowner satisfaction. Looking for permanent job for leap forward engineering mind.

Mechanical engineer in oil and gas sector

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

Civil engineer with 17 years experience

Corrosion Engineer with extensive knowlede in the area of materials selection for chemical and water processing industries.

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

To participate in periodical inspection and testing of all static equipment of process plants and pipelines to analyse the condition of the equipment.

Executive Mechanical at Megasteel Sdn Bhd under repair and maintenance, As Mechanical Engineer at Stagno Tech Sdn Bhd aslo under repair and maintenance Banting, Selangor

Senior Inspector, CSWIP 3,2 + RAD. Interpretation

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Self-motivated & hard-working Drilling Superintendent / Company Man with a vast experience spread over 29 years in well reputed National & International E&P Companies.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter B&R, GE

Senior buyer with more than 20 years exposure to both the on- and offshore oil and gas / petrochem sectors and has executed materials / procurement activities for a number of world-wide projects during various project phases.

Underbalanced Drilling, UB Drilling, Air Drilling, OHSE Managment, Operations Manager Drilling Consultant, Toolpusher

Drilling Fluids Cementing Logistics Marketing Management

Cost Engineer

I am a qualified Mechanical Fitter and Turner with twenty years extensive experience. I am booked to complete an Offshore Survival & Fire Fighting Course from 16 Aug until 20 Aug 2004.

I am an electrical engineer, I have 14 years experience in industrial projects mainly in steel industry and oil & gas industries, I have gained valuable experience in design, procurement and construction of electrical systems, I am familiar with MS office and electrical analysis software Etap.

I am an electrical engineer, I have 14 years experience in industrial projects, I am looking for a job in United Arab Emirates.

I'm a Senior CSWIP 3.2 and Radiographic Interpreter 3.4 holder. Having more than Twenty years of experienced in Oil & Gas construction and Inspection work, both Structural or Piping in Onshore and Offshore. Familiarized with various Welding Processes and relevant Code & Standard.

20 years experience in the industry and PDMS user since 1997. Extensive experience in PDMS 3D Design and 2D Draft producing engineering and fabrication drawings for a wide range of projects in the following countries: France, USA, Norway, Holland and UK. Experience in AutoCAD and Microstation.

Played as a Coordinator / senior to executed various turnkey EPC Projects incl HVAC system Rich Experience in the Project Management and coordinate to finalise Basic Design, Basic Engineering, Detailed Engineering with Process Engg.

Date of Birth 19 Octobre 1951 Nationality British/Turkish (double nationality) Current Position Beicip Franlab Associate Reservoir Management Consultant

Twenty years experience in global recruitment of oil & gas people: sound knowledge of engineering skills required for design, fabrication, construction, commissioning of FPSOs, LNG trains, offshore platforms, petrochemical plants and refineries.

Maintenance Supervisor/ Superintendent

maintenance electrician moving to Alberta Canada requiring career opportunities

Senior Piping Designer

I am interested in domestic or international employment in the oil and gas industry. Please see resume for an overview of my qualifications.

A professionally qualified Engineer and Maintenance Specialist, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical, training and management disciplines as well as practical, 'hands-on' involvement.

29 years experience in offshore pipeline project engineering, procurement, offshore construction & commissioning in North Sea & SE Asia. Includes pipelines, risers, tie-in spools, manifolds, umbilical, shore approaches, testing, de-watering, air & vacuum drying & nitrogen purging & gassing up.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

Qualified Mechanical & Marine Engineer with 20 years oil field maintenance experience. 6 years as Mechanical Supervisor on Production Platform. Production operations experience, high pressure/high temperature wells. Overseas experience. Qualified crane operator and many other offshore courses.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out