Resume - Integrated Drilling Evaluation and Logging system, integrated down hole directio...

Misco Jobs

Resume #6435

CONTACT INFORMATION:
View contact information...

EXPERIENCE

With a 15 years career as an Upstream Engineer I was involved in preparing remedial work over, stimulation evaluations and procedures and providing engineering support during the field operations, production optimization, reservoir performance evaluations, facilities optimization and upgrades, identifying new drilling prospects, and providing engineering support during drilling operations. I had Border-less career with opportunities to work in many countries and experience varied cultures in different locations.

From: Sep 2001
To: Present

Vermilion Energy Canada
Senior Development Engineer
Responsible for providing the engineering and final proposals for all workovers, completions and drilling development for different fields. Some of my primary duties and responsibilities are to function as a member of the company’s team in both France and Canada and provide strategic and operational input into all workover and well completion decisions by analytically reviewing well files. I take a lead role in directing the stimulation of all vertical and horizontal wells by formation damage assessment and recommending (Matix acidizing & Hydraulic Fracturing) with the objective of production optimization and enhanced profitability and implementing optimization of reservoirs through Enhanced Recovery Programs. I also provide a close follow up of day to day production using computer software (OFM,PVR, PEEP) and select well workover candidates based on economical studies and risk evaluation and AFE establishment.

From: July.1992
To: Sep. 2001
Schlumberger OFS
Drilling Services Engineer
Canada USA UK West Africa
Providing services in the following domains :
- Drilling operations ( Directional Drilling - LWD - MWD )
- Well Construction ( Cementing and Drilling Fluids)
- Well production ( Matrix Acidizing and Frac Stimulation)
- Well intervention ( Coiled Tubing and Pumping )

Schlumberger Anadrill

Part of a decision making team, I was involved in monitoring the drilling process, data interpretation using real time drilling related geological and petrophysical data to perform a geological guidance and course correction to keep the well within the reservoir. My duties were to plan and execute the following operations: Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Jul. 1992
Oct. 1995
UK North Africa
Schlumberger Dowell
As a Dowell Engineer I worked and operated closely with Oil and gas companies either on land and off-shore to optimize well productivity in a safe and environmentally responsible manner. My job required both team work and individual initiatives to help reduce drilling costs with high value services using computer- aided design and evaluation ( CADE ) office software developed and used worldwide by Dowell Engineers. Well construction services :Designing, Executing and Evaluating Cementing programs and fluid selection, down hole tools , Drilling fluids and completion systems.Well Production services: Help increase production, increase recovery and reduce costs by identifying the type and reservoir damage and selecting the best treatment fluid types and volumes. ( Fracturing stimulation or Matrix acidizing )

From: Sep. 1988
To: May. 1992
Sonatrach - Sonelgaz
Gas Facility Engineer:
Engineer in charge of organization and follow up of pipelines and gas plant facilities construction and exploitation operations.
- Daily operations follow up and scheduling
- Monthly and weekly activity reports
- Cost optimization and economical studies
- Technical expertise and support for Welding procedures
- Hydrostatic testing- Drying procedures
- Gas flow operations, hydrate removal and Condensate recovery

FORMATION & PROFESSIONAL TRAINING

From: Jan. 1998
To: Feb. 1998
- Directional drilling and well planning course Well path design and drilling execution operations.
(Schlumberger Anadrill Training Center Houston, USA)

April 1997
- Well Log Interpretation and reservoir estimation course LWD and wireline logs quality evaluation and interpretation.
(Schlumberger Anadrill Training Center Houston, USA)

From: Jan. 1996
To: Mar. 1996
- Measurement & Logging while drilling course Operationally run MWD and LWD tools.
(Schlumberger Anadrill Training Center Houston, USA)

June 1995
- Design and Evaluation course for Matrix acidizing and reservoir stimulation How to detect and prevent formation damage and enhance production in oil and gas wells.
(Schlumberger Dowell Training Center, UK)

June 1994
- Design and Evaluation course for well Cementing, How to design cementing fluids , Cementing evaluation logs interpretation.
(Schlumberger Dowell Training Center, UK)

May 1994
- Advanced Service Module for Cementing Products New technology and products for well construction fluids.
(Schlumberger Dowell Training Center, UK)

From: Sep. 1993
To: Dec. 1993
- Field Engineer Course, Training to be professionally fully operational in well cementing and pumping services , and run down-hole tools.
Schlumberger Dowell Training Center, UK)

EDUCATION

From: Sep. 1984
To: Jun. 1989
(Algerian Petroleum Institute, Algiers, Algeria)
B.Sc. in Petroleum Engineering (5 years formation at Algerian University) Specialized in Gas transportation and distribution : presented a fifth year project after one year of field training.

Subject : Study and design of the hydrostatic testing and drying procedure optimization for a 28” diameter gas transport pipeline with 130 Km length.

SURVIVAL & SAFETY TRAINING

- Radiation safety and operation procedures for nuclear tools
- First aid and emergency procedures
- Off-shore working and living rules
- Helicopters safety
- H2S survival procedure
- Defensive driving for cars and pickups
- Desert and offshore survival course
- Basic handling and stepping and back care course

LANGUAGE

English, French, Arabic.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 6411)

Go to Search Parameters...

Brief Description

Senior engineer (piping construction & mechanical installation engineer

•Installation, loop checking, Commissioning and maintenance of online Analyzers

Mechanical engineering (heat and fluids)

Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

With fourteen(14) years experience in Piping Design and Field Engineering Works of various Petrochemical, Oil Gas Plant from feed engineering up to detail design. Capable of checking of piping design up to IFC drawing and with experience of site engineering works.

electrical technician to repair n maintain all HV/LV electrical machines n equipment,testing them, trouble shooting and corrective maintemance.3 yrs diploma cource completed in electrical engineering.11 yrs experience in electrical jobs.result oriented n confidence in work.

Excellent organization skills

Over 8 years experienced on diffrent type of rig work over,deep and ultra deep rigs which done explratery wells. i passed the Diploma of Associate engineering in Mechanical. I done Engine overhaulling CAT D398 & Draw Works overhaulling.

1990 Diploma in Mechanical Engineering

I am Bachelor of Science in Computer Science and Engineering.working as a SCADA Engineer in PGCB about 5 years.

Process operator of Fluid catalytic cracking unit and Hydergen gereration unit

Subsea Installation Supervisor of wellheads, XT,s and completions.

Total experians 8 years instrumentation and control technician

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).

Experienced Supervisor in the Electric Submersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

Free! Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

Senior Chemical Integrity Engineer

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

Junior well engineer, Design engineer

Qualification: MSc Corrosion Control Engineering Experience

Instrument Engineer

Bachelor's in Commerce plus Mechanical Diploma

Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out