Resume - RESERVOIR ENGINEER; WELLTESTING; FORMATION EVALUATION; SIMULATION

Misco Jobs

Resume #64383

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

Seeking Position as a Reservoir Engineer

EDUCATION
August 2001-July 2003 Master Degree in Petroleum
Department of Petroleum Engineering
Texas A&M University
College Station, TX, USA

January 1999-March 2000 Specialist in Reservoir Engineer
Simón Bolívar University "USB"
Caracas, Venezuela

March 1990-June 1996 B.Sc. Petroleum Engineer
University Central of Venezuela
Caracas, Venezuela

LANGUAGE ABILITY
Spanish: Native speaker
English: Good

SKILLS AS A RESERVOIR ENGINEER
Iidentification and evaluation of development opportunities as well as the ongoing management of the reservoir performing the follow activities:
1. Decline Analysis (Skill level: Advantage)
2. Water, Gas, and Oil Production Analysis (Skill level: Advantage)
3. Fluid quality control for Gas and Oil fluid samples (Skill level: Advantage)
4. RFT/MDT pressure analysis (Skill level: Advantage)
5. Well Test Analysis (Build up, Fall off, DST analysis (Skill level: Advantage)
6. Gas and Oil Reserves Estimation (Level: Advantage)
7. Simulation of Thermal Heavy oil, and Gas (Skill level: Medium)
8. Conventional and unconventional Petrophysic Evaluation (Skill level: Basic)

WORK EXPERIENCE

July 1996-ACTUAL PDVSA-INTEVEP
Research center and Technological support. Branch of PDVSA.
Urbanization Santa Rosa. Sector the Drum, Teques. State Miranda.
Section 76343, Caracas1070A, Venezuela

EMPLOYMENT HISTORY

In 1995 "Simulation of a pilot area with a water injection process in the VLE-05 reservoir in the Maracaibo Lake, Venezuela". Preparation of work's thesis at the Universidad Central de Venezuela to get B.S. Petroleum Engineer:
Software used: Eclipse 100
Responsibilities and achievements:
1. - Looking for geological, petrophysic, production rates, completion wells, pressure (RFT/MDT) and fluid (water and oil properties) laboratory report.
2.- Quality control for this data.
3.- Generation of the eclipse database file.
4. - Initialization of the simulation, history match, and forecast production.

In 1996 "Thermal Simulation (Cycle Steam Process) of a pilot area of Bachaquero Field, Venezuela"(PDVSA-OCCIDENTE)
Software used: CMG STARTS
Responsibilities and achievements:
1. - Looking for geological, petrophysic, production rates, and completion wells, pressures (RFT, pwf and whp) and fluid (water and gas properties) laboratory reports.
2. - Quality control for this data.
3. - Generation of a STARTS database file.
4. - Initialization of the simulation, history match, and forecast production.
5. - Conclusions and Recommendations

In 1996 "Reservoir Study of Lagunillas Inf-07. Phase One (Search and Quality Control Information)" (PDVSA-OCCIDENTE)
Software used: Microsoft Word, Excel and PowerPoint.
Responsibilities and achievements:
1. - Looking for production rates, completion wells, pressures (well tests, RFT/MDT) and fluid (water and oil properties) laboratory reports.
2. - Quality control for this data.
3.- Co-Management

In 1997 "Reservoir Study in Lagunillas Inf-07. Phase two; Fall-off Analysis & Decline Analysis"
(PDVSA-OCCIDENTE)
Software used: Microsoft Excel
Responsibilities and achievements:
1. - Looking for well tests, and fluid laboratory reports.
2. - Quality control for this data.
3. – Fall off analysis
4. – Decline Analysis Production
5. - Conclusions and Recommendations

In 1997 "Conventional SAGD Simulation for Bachaquero Field, Western of Venezuela" (PDVSA-OCCIDENTE)
Software used: CMG STARTS
Responsibilities and achievements:
1. - Looking for geological, petrophysic, production rates, completion wells, pressures (RFT, pwf and whp) and fluid (water and gas properties) laboratory reports.
2. - Quality control for this data.
3. - Generation of a STARTS database file.
4. - Initialization of the simulation, history match, and forecast production.
5. - Conclusions and Recommendations

In 1998 "Reservoir Study in Lagunillas 05; Differences between vertical and horizontal wells" (PDVSA PDVSA-OCCIDENTE)
Software used: Microsoft Excel
Responsibilities and achievements:
1. - Looking for production rates, completion wells, pressures (RFT, well tests) and fluid laboratory reports.
2. - Quality control for this data.
3. - Performed decline curve analysis.
4. - Conclusions and recommendations

In 1999 "Reservoir Study in Barinas; Analysis of Water Control Diagnostic using Chan plots" (PDVSA-SUR)
Software used: Microsoft Excel
Responsibilities and achievements:
1. - Looking for gas, water and oil production, RFT pressures and fluid laboratory tests
2. - Quality control for this data (PVT laboratory tests and production rates)
3. - Water production was evaluated using Chan plots
4. - Conclusions

In 2000 Thesis work "Generation of an oil compressibility correlation (Co) for Black Oils (with high API and Low gas-oil ratio)" (PDVSA-SUR)
Software used: Math software (Statistics Software)
Responsibilities and achievements:
1. - Literature review (previous work about Co correlations, and laboratory reports)
2. - Looking for gas, production rates, and fluid laboratory report
3. - Quality control for these PVT data for Barinas and PVT reports found on literature review.
4. - Adjusted of a new Co correlation for Oil's with high API and low GOR for Barinas' oil.

In 2001 "Analysis of a five wells pattern WAG process in B-6-X.10 reservoir, Tía Juana Field, Venezuela" (PDVSA-OCCIDENTE)
Software used: MBAL and Excel worksheet.
Responsibilities and achievements:
1.- Looking for gas, water and oil production, completion wells, gas and water injection rate information, pressure (RFT, pwf and whp) and fluid (water and gas properties) laboratory report.
2.- Quality control for these data.
3.- Decline analysis for and Production analysis for each producer well.
4.- Conclusions and Recommendations

2001-2003 (Master Degree in Petroleum Engineer at Texas A&M)

In 2003 "Generation of a Material Balance Equation for Abnormal Gas Pressure Reservoir (IGIP for Abnormal Pressure Gas Reservoir)" Volumetric gas reservoirs that have abnormal pressure need a special care when there are going to perform a material balance because they have a dual p/z vs rate behavior. For this work I checked previous work, analyzed the mathematical fundaments and manipulated those to get an iterative work sheet in excel to do the Material Balance. This MB only use production data instead some methods that need laboratory data. (This work was my work's thesis to get the Master Degree Petroleum in Texas A&M University)

In 2004 "Simulation Study for Horizontal Wells in 11M-269 reservoir, Acema 200 Field, Venezuela" (PDVSA ORIENTE)
Software used: Eclipse 100.
Responsibilities and achievements:
1. – Looking for production rates, completion wells, pressures (well tests, and RFT) and fluid (water and gas properties) laboratory reports.
2. - Quality control for these data.
3. - Generation of the eclipse database file.
4. - Initialization of the Simulation, history match, and selected several sceneries to evaluate.
5. - Conclusions and Recommendations

In 2005-2007 "Unitization Projects between Venezuela and Trinidad & Tobago (Blocks 6d in T&T, and 1 and 2 in Venezuela)"
Software used: Microsoft Excel for IGIP, Prizm for Petrophysic Evaluation, and PanSystem for DST Analyses.
Responsibilities and achievements before the exchange data:
1.- Coordinated the information search for Venezuela Share such as DIMS, drilling reports, seismic raw tapes and Venezuela Interpretations, production tests, completion wells, pressures (RFT, and DST) and fluid (water and gas properties) laboratory reports.
2. - Coordinated the generation of data pack.
3. - Coordinator of technical meeting between the Venezuela and T&T teams in Venezuela and Trinidad.
Responsibilities and achievements after the exchanged date:
1. - Quality control for T&T data pack.
2. - Analysis of pressure data (MDT): Generation of fluid gradients, and contacts
3. - Comparison of results again wells of Venezuela and T&T. (Generation of structural sections to evaluate the reservoir continuity)
4. - No-conventional petrophysic evaluation for seven shaly sands.
5. - Well test analysis of seven DST.
6. - Selection of the basic reservoir parameterizes for each of seven reservoir (Loran-Manatee Field) and four (Kapok-Dorado Field)
7. - Generation of the Volumetric Gas Factor (Bg)
8. - Estimation or OGIP and reserves
9. - Distribution of reserves of each country.
10.- Conclusions and Recommendations

PUBLICATIONS
1. Spaced Drilling Evaluation in C2/VLE-305 reservoir, Block V Lamar". May_1996.
2. Evaluation of Exploitation Alternatives in Bachaquero-01 reservoir, using IAV, Horizontal, and Vertical Wells, INT-STE-00729,96.
3. Exploitation Recommendations for Bachaquero-01 reservoir, INT-STE-00730,96.
4. Analysis and Design of a System of Information for a Reservoir Called "SINPEY", INT-03464,97.
5. Guide "DRASTIC", INT-M-00206,97.
6. Integrated Study in Lagunillas Inferior 07 Reservoir, Venezuela. INT-STE-01276,97.
7. Conventional Black Oil PVT Quality Control in LGINF07, LAGUNA 38 y LAGUNA 44 Fluid Samples, INT-4718, 1998.
8. Design of Well Files Worksheet for LL-07, Reservoir, INT-4703, 1998.
9. Audience of the Information for LAGUNA 05, LAGUNA 38 y LAGUNA 44 Reservoirs, INT-5123, 1998.
10. Analysis of A Steam Cycle Injection Process for LGINF07 Reservoir, using OFM, INT- 5415, 1998.
11. WAG Analysis Report for B-6-X.10 Reservoir, using Eclipse, IT-OC-2000-253, TJ, Sep_2000.
12. Well Productivity and Water Production Analysis in B-6-X.10' Reservoir, INT-8066, 2000.
13. Quality PVT Control and Synthetic Generation of a PVT Analysis using Eclipse for B-6-X.10 Reservoir, INT-8068, 2000.
14. A QUADRATIC CUMULATIVE PRODUCTION MODEL FOR THE MATERIAL BALANCE OF ABNORMAL PRESSURED GAS RESERVOIR, July_2003.
15. Guide for Condensate Gas Wells Sampling and Quality Control in Gas Condensate Wells, INT-10351,2004.
16. Simulation Study for Horizontal Wells performed in 11M-269 reservoir, Acema 200 Filed, Venezuela, INT-10291,2004.
17. What is a Reservoir UNITITATION Process, INT-10605, 2005.
18. Unitization Project between The Bolivarian Republic of Venezuela and Trinidad & Tobago, INT-10606, 2005_1st Phase (CONFIDENTIAL)
19. Unititation Project between The Bolivarian Republic of Venezuela and Trinidad & Tobago, INT-10606, 2005_2nd Phase (CONFIDENTIAL)
20. Petrophysic Evaluation Models for shaly Sandsl, INT-XXXXX, 2006.
21. No-conventional Petrophysic Evaluation for Block 2 and 6d, INT-XXXXX, 2006.
22. Impact over IGIP and Reserves of the Double Water Model used to Estimate Petrophysic Parameters, INT-XXXXX, 2006.
23. SPE 90560 "A Quadratic Cumulative Production Model for the Material Balance of an Abnormally Pressured Gas Reservoir". Year_2004.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 6742)

Go to Search Parameters...

Brief Description

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

Fifteen Years working experience on various tankers, out of which eleven years of working experience as 2nd Engineer with Shell Shipping.

I have 13 years experiance in QA/QC inspection field , i working as Piping & Structural Inspector in various projects

13 years exp electrical engineer in T&D of Power sector

Skilled drilling engineer with more than 12 years experience for offshore drilling operation - Immediate available

Instrumentation and control Engineer with following Skills: Honeywell TDC 3000,ABB AC800x,Allen Bradely Panel View,Siemens S5 & S7,Various Field Devices

a very energetic, dynamic and analytical minded person. work with less supervision, written and spoken english are very good. i am trustworthy and dependable person and possess interpersonal relationship ability. have good working relationship with colleagues and superdinates. can handle stress

Free! Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

Surveyro

Electrical engineering design, B.E(Electrical & Electronics)

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

I have 15 plus years oilfield experience working in refinery in Bahrain. This experience excludes time with Shell Todd Oil Services in New Zealand as Production Technician and as a Senior Mechanical Technician at Transalta Power Station – GT26 (Alstom). I am very adaptable to work schedule and have

Wellsite Drilling Supervisor

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

14 years of project experience including as Sr. pipeline engineer and piping engineer as well have experience as senior pipeline designer and piping designer including 4 years of experience in supervising a team of designers and draftsmen. Design and drafting experience in various field.

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

Mechanical engineer Having Experience in Installation,Inspection and commissioning Rotating equipment and various static and package equipments.Having total 10 years of project experience including 5+ years of experience in Oil & Gas projects

Application for the position as QA/QC personal in Oil/Gas/Petrochemical industries

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

HIGH LEVEL ENGINEER EXCELLENT EXPERIENCE IN THE PETROLEUM/OIL INDUSTRY, MULTI-TASK WORKER, TRILINGUAL, SKILL TO CREATE GOOD ENVIROMENT AT WORK, COMPROMISE TO EXECUTE PROJECTS ON TIME AND BUDGET, HAPPY TO LEARN NEW EXPERIENCE AT WORK EVERY DAY.

Petroleum_ maintenance planning engineer in Qatar Petroleum

Degree in Mechanical Engineer with distinction , Certified Vibration Specialiest from Vibration Institute, USA .Having 13 years of experience in Reliablity Enhancement , troubleshooting & Maintenance support of Rotating Equipments

Graduate Mechanical Engineer with over 12 years experience ( presently working as ¡§Senior Mechanical Engineer (Reliability)¡¨ and additional responsibility as ¡§Shutdown Project Leader¡¨ for Gas-To-Liquids:GTL plant in Qatar ) in an operating environment with hands on experience in RELIABILITY

• More than twelve years of experience in planning and scheduling and project control which have mostly been achieved during the course of execution of multimillions dollars project in Oil, Gas and petrochemical fields inside the country Iran and Turkmenistan (In all type of projects: E, EP, EPC, MC

Experienced in power plant, utilities and offsites plant operation and commissioning

In The field of HSE

An internationally experienced more than 13 years as Professional Inspector / Inspection Engineer involved in Inspection of In-service – Baseline / corrosion monitoring, Turnaround, Shop fabrication / Erection of Vessels, Tanks, Piping, valve components,

18 years petrochemical experience, senior engineer

RESERVOIR ENGINEER; WELLTESTING; FORMATION EVALUATION; SIMULATION

A senior professional with 22+ years of rich experience in Project Management, Inventory Management, Operations Management, Documentation Management; presently associated with Voltas Ltd, Qatar; seeks senior level opportunity preferably in on shore - off-shore oil/gas projects.

INSTRUMENTATION 28 YEARS EXPERIENCE ON THE OIL & GAS AND PETROCHEMICAL INDUSTRY

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out