Resume - Fifteen years of experience in the field of Design Engineering in the areas of O...

Misco Jobs

Resume #65074

CONTACT INFORMATION:
View contact information...

EDUCATION

Technological Institute of the Philippines (1990)
Manila, Philippines
Bachelor of Science in Electrical Engineering

PROFESSIONAL EXPERIENCE

Mar 2007-Present Bechtel London Limited - 245 Hammersmith Road- London W6 8DP
Instrument Designer

Project Involvement: Khursaniyah Gas Plant - Aramco

Responsibilities:
* Prepare instrument points & lines and cable block diagram.
* Use PDS drawing manager and Orthogen for 2d extraction from model.
* Use Index & Browser modules to perform SmartPlant Instrumentation -INTools version 7.
* Prepare 2D deliverables using Bentley's Microstation/J.
* Review instrument Locations and other related instruments using Smart Plant Review (SPR).
* Coordinate with other disciplines regarding 3d model design issue.

Aug 2004-Mar 2007 Technip Coflexip - PO Box 7657, Nbad Tower, Abu Dhabi- UAE
Instrument Designer

Project Involvement:

1. RGX6 - RasGas Onshore / Onplot Expansion Project (Train 6&7 EPC)

Responsibilities:
* Prepare instrument drawings such as layout of field instrument, layout of instrument for u/g and stub-up conduit pipe, cable tray/ trench layout & sections.
* Responsible for 3D modeling of instrument cable tray, stanchion for inline & offline instruments, junction boxes, fire & gas and telecom equipments such as PAGA, beacon,
JB, outdoor CCTV and telephone using Plant Design System-EE Raceway (PDS).
* Use Orthogen for 2d extraction.
* Represent Instrumentation group for 90% and final project model design review with clients held in Technip main office at Paris France.
* Generates status reports for PDS modeled instrument.
* Resolve and generate clash report using Caxpert Clash Manager.
* Review instrument Locations, tray and trench routing using Smart Plant Review (SPR).
* Prepare 2D deliverables using Bentley's Microstation/J.
* Part in preparation of bulk material take-off list.
* Coordinate with other disciplines regarding design variations and input to complete design scope requirements.
* Perform quality checks as per company's standard procedure and verification of compliance to standards for all instrumentation related drawings issued for construction.

2. EPC for North East Bab (NEB) Phase 1 Development, ADCO; P02041

The project requires new processing facilities to handle oil, gas and water production from Al-Dabiyya & Rumaitha's Oil Field.

* Responsibility includes preparation of Instrument layout, Instrument main cable routing and Instrument installation details for Central processing unit (CPP) and Oil cluster.
* Performs offline instrument modeling using Plant Design System-EE Raceway (PDS).
* Use Orthogen for 2d Extraction and convert Microstation DGN file to AutoCAD DWG file.
* Prepare 2D drawing deliverables using AutoCAD 2004 and 2006.

Sep 2003-Jul 2004 United Engineers (S) Pte. Ltd. - 257 Jln Ibrahim Singapore 629147
E & I Modeler

Project Involvement: Changi Water Reclamation Plant

Responsibilities:
* Responsible for 3D and 2D design deliverables using Integraph's PlantSpace (3d) Design
Series (PSDS) software, Bentley's Microstation/J and Microstation Triforma.
* Generate model for Electrical and Instrument cable tray layout (Main and minor raceway), tray and Cable Sections, Cable Support and tray penetration.
* Prepare Bill of Quantities.
* Use Enterprise Navigator for model review/ presentation to client.
* Modify existing P&ID drawings using PDS P&ID software.

Jan 2001-Jan 2003 ABB Lummus Alireza Ltd. Co. - Al-Khobar, Kingdom of Saudi Arabia
Instrument Designer

Project Involvement:

1. Absf-119, 62, 63, 100, 90 (8-Well Platform), TP-2 (Tie-In Platform) – Abu Safah
AM Producing Facilities – 300 MBCD (Bi-3028/Wer082) - Aramco

The project consists of typical five new 8-well platforms and Tie-in platform located in Abu-Safah Oil fields.

Responsibilities:
* Responsible for 3D and 2D design deliverables using Aveva's Plant Design Management system (PDMS) and Bentley's Microstation/J software.
* Generate model for ESD tray, tubing supports and routing from ESD master panel to production wellheads; Instruments hookups to Isolation valves (ZV's), fusible plugs
(TE's), handstations and others.
* Produce Instrument Points and Lines, ESD tubing Routing layout and generate details and sections from 3D modeling to 2D draft.
* Make inter-discipline check and squad checking as per Aramco procedure.
* Prepare material take-off list.

2. Khuff Condensate –Saudi Aramco Ras Tanura Refinery (BI-3503)

The project needs Modification of existing facilities for storage and transfer of Khuff Condensate and associated products from a new Khuff Condensate Fractionation Unit. These changes require the provision of a quantity of new MOV's and field Instrumentation.

Responsibilities:
* Prepare Instrument deliverables such as Instrument points and lines, Cable block diagram, Interconnection wiring diagram, Electrical installation details for field junction boxes, Instrument installation schedule and Control conduit schedule.
* Make inter-discipline check and squad checking as per Aramco procedure.
* Responsibility includes drawing retrieval and site survey.
* Use Microstation software for Cad deliverables.

July 1997-Dec 2000 Parsons International Limited Company - Makati, Philippines
E & I Designer

Project Involvement:

1. Shell Refinery – Engineering Work Orders/Detail Design

The project provides Services for Engineering Work Orders for Plant Modification.

Responsibilities:
* Involved in Instrumentation design for new field instruments.
* Incorporation of additional and modifications in the existing control systems including
ESD, DCS and reporting system.
* Responsibility includes generation of various Instrument and Control drawings such as
Instrument points and lines, Cable block diagram, Interconnection wiring diagram, mounting drawings and Control conduit schedule.
* Use Microstation SE for Cad deliverables.

2. Gizan Military Installation Project - Saudi Arabia
Responsibilities:
* Involved in Electrical design of Airports, Hospitals, Buildings and Infrastructure for
Military Complex in the Kingdom of Saudi Arabia, which comprises of Military City,
Farasan Naval Base and Gizan Naval Base. Assigned as Detail Coordinator and developed all standard details for Instrument, Electrical, Telecommunications and Auxiliary systems.
* Use Microstation SE for Cad deliverables.

Feb 1995-Apr 1997 Saudi Arabian Bechtel Company - Al-Khobar, Kingdom of Saudi Arabia
E & I Designer

Project Involvement:

1.Fire and Gas Protection Upgrade – Saudi Aramco Riyadh Refinery (BI-10043)

Responsibilities:
* Developed instrumentation drawings such as Instrument points and lines, cable block diagram, Interconnection wiring diagram. Responsibility includes site survey and drawing retrieval.
* Use Microstation software for Cad deliverables.

2. Ibn Rushd PTA/ Aromatics Plant - Royal Commission, Yanbu

Responsibilities:
* Involved in 115 cable and cable tray layout inside Myas Sf6 switchyard, Underground cable routing from Myas Sf6 Switchyard to Substation 4D and 115kv Switchgear supply to all Substation in PTA/Aromatics Plant.
* Use Microstation software for Cad deliverables.

Jun 1994-Dec 1994 ABB Lummus Alireza Ltd. Co. - Al-Khobar, Kingdom of Saudi Arabia
CAD Operator

Responsibilities:
* Responsible for Instrumentation and Electrical Drawings for Offshore projects located in Marjan Field, Gosp-1 Facilities, Safaniyah tie-in Platform (Tp-13), Zuluf Tie-In
Platform (Tp-5 & Tp-6) and Berrie Field.
* Use Microstation software for Cad deliverables.

Aug 1993-May1994 Vista Cad Services Incorporated - Philippines
CAD Operator

Project Involvement: Esso Petroleum Co. (CANADA)

Responsibilities:
* Responsible for Drafting of multi-Discipline Drawings for Instrumentation, Electrical,
Telecommunications, Piping and Structural design.
* Use Microstation and AutoCAD software for Cad deliverables.

Mar 1992-Apr 1993 Arabscan - Al-Khobar, Kingdom of Saudi Arabia

CAD Operator
Responsibilities:
* Responsible for Drafting of multi-Discipline Drawings including Instrumentation,
Electrical, Telecommunications, Piping, Civil and Structural design using Microstation and AutoCad software.
* Assigned in Aramco Engineering Office doing Scanning, Vector and Raster editing.
* Involved in GIS mappings of Madina Municipality using Microstation and I/Ras PC.

SOFTWARE PARTICULARS

Microstation & I/RAS PC - Bentley versions 95, SE, J, Triforma & V8
AutoCAD – Autodesk version 2004/2006
Plant Design System (PDS)-EE Raceway Modeling – Intergraph version 07.02.00.21
Plant Design and Management System (PDMS) – Aveva version 11.6
PlantSpace (3d) Design Series (PSDS) - Intergraph
SmartPlant Instrumentation -INtools – Intergraph version 7.00.06.02
Smart Plant Review (SPR) – Intergraph version 4.2.4
Ortho Gen – version 7.01.03
Interference Manager - Bentley
Pds P&ID 2d - Intergraph

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 6519)

Go to Search Parameters...

Brief Description

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Application for the post of Piping Designer / Mech. Draughtsman

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

I have the experience as land surveyor. 10 years in united arab emirates & 6 years in Pakistan. I can do all kind of work related to my profession.

Highly motivated and result-oriented Chemical Engineer with 10+ years of international experience and proven results seeking for challenging opportunities. Well Services Field Engineer. Oil refinery and laboratory experiance.

10 years of extensive experience in planning/maintenance (CMMS) and Engineering in Petrochemical Process Industry, mainly in the Ethylene Plant and Oil and Gas Industry

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Piping /Supervisor/ Superintendent Site Manager. City and Guilds I Basic, II Pipe work, III Advanced Piping, 1970 TO 1975, Northern Counties, Engineering Craft Studies, Level 3 Pipe Fitting, 1970 to 1975 Time served (1970-1975 Emanuel Spence Pipe Services

Experience in design with Engineering Consultancy and EPC Firms in Refinery, Oil & Gas Pipeline projects, Power projects, Substation projects in India, Middle East, Africa and Canada.

Drilling Foreman (Drilling Supervisor) I have 30+ years drilling experience, which includes working as a rig worker, Mud Engineer, and Drilling Foreman.

I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.

ELECTRICAL ENGINEER WITH MORE THAN 14 YEARS EXPERIENCE

An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.

Available for International Consulting. Strong Field drilling and completion experience. Can become re-certified in a short time frame.

Fifteen years of experience in the field of Design Engineering in the areas of Onshore/Offshore facilities and Petrochemical Plants. Experienced with various computer aided system platform/ design software (3d & 2d) such as MicroStation, AutoCAD , PDS, PDMS, PSDS, OrthoGen, SPR and SPI.

Welding Inspector and Inspection Engineer

Procurement Manager for 1. Projects, 2. Services, 3. Transactional, 4. Contracts, 5. Materials Management (For Oil/Gas, Petrochemical, Shipping, Semiconductor, Manufacturing, Trading), Multi skilled level.

Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Operations wellsite geologist for HPHT,Deepwater and Extended reach drilling with Geosteering and Pore pressure nalysis

Static Equipment Mechanical Engineer

Mechanical Engineer; Static Equipment

Workshop mechanic to TRS Departement to Weatherford oil tool Algeria: JSA Training ; Risk Assessment Training; EEP Cetificate; Basic First Aid Training ; Fire Marshal Training ; Stab Master Sistem Training

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Geotechnical Field Rep

I am an Instrumentation and Electrical Supervisor/ Technician with significant experience in Maintenance and HUC in the Oil & Gas and Petrochemical Industries.

I have 12 years experience in oil and gas field

Well Services Supervisor 30+ years in the patch

My job expertise is in the field of technical and non-technical training for automotive and heavy equipment. I conduct trainings for repair and maintenance of vehicles systems and instrumentation. As a Trainng Head / Instructor I also manage the whole training operation in my department.

i can work alone and do maintenance job safely

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Free! Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out