Resume - 20 years combined working experience in Project Engineering, Construction, Desig...

Misco Jobs

Resume #65128

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To maintain the continuity of service and reliability operation of Power and Plant Utilities, plans, design & construction, organize and supervises Electrical Project throughout the Company within HSE standard and procedures for oil/gas production facilities.

EDUCATION:
Graduated with the Degree of Science in Electrical Engineering
Western Institute of Technology, 1980
Iloilo City, Philippines

QUALIFICATION:
REGISTERED ELECTRICAL ENGINEER
License Number 0005576, 1982
Professional Regulation Commission, Manila, Philippines

SUMMARY OF WORK EXPERIENCE and SPECIALIZED SKILLS:
„« 20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical/Instrumentation Equipment including the Preventive and Corrective Maintenance of 4x400 MW Steam-Turbine Generator, 3x34.5 MVA Gas Turbine Generator, 4x75 KVA Diesel Generator, 13.8 /230 KV SF6 Gas Insulated Switchgear, Unit Transformers, High/Low voltage Metal Clad Switchgears, Motors, Air Compressors and Auxiliary Facilities, Oil/Gas gathering and separator station, SCPF, Production oil wells, FPSO / FSO Project.
„« Undertake field Engineering (design, construct, commissioning and maintenance) in support to onshore facilities. Familiar with the IIEE, NFPA, ATEX and IEC standard.
„« Plan, organizes and supervise electrical project. Ensure that technical modification, plant changes and new construction work are delivered on time and within budget to the specified quality HSE, environmental and societal standards.
„« Administer the Electrical Planned Preventive Maintenance (PPM) program in line with production and ensure that the maintenance task undertaken to prevent equipment breakdown.
„« Trained in Computerize Maintenance Maintenance System (CMMS) Datastream7i Citrix MetaFrame XP and SAP program used by Tengiz Chevron Oil, uploading all plant electrical assets, releasing work order, prepare and develop Planned Preventive Maintenance procedures, create PPM schedule, Identify critical electrical equipment and spare-parts availability through out the facilities prior for work implementation. Established Electrical spare parts and define the minimum, maximum and re-order order stock level.
„« Prepare and execute the request for modification, contract strategy, technical working procedures, scope of work, provide detailed construction and as-built drawing, material take off and develop cost estimates.
„« Prepare technical specification of electrical materials to be used with in Hazardous and Non Hazardous classification.
„« Develop equipment specification and prepare material requisitions for switchboards, generators, motors, UPS systems and other required electrical equipment. Issue material requisitions for enquiry, order placement and for any subsequent revisions.
„« Plan, supervise and coordinate all maintenance activities for Plant Electrical equipment to ensure availability and reliability. Troubleshoot electrical problem.
„« Participate in Root Cause Failure Analysis (RCFA) and Assessment Performance, Value Management and Value engineering meeting, Present tool box talk, Department Safety Audit, Job Safety Analysis, HAZID (Hazard Identification), HAZOP, Safety walk down and Department Safety Meeting.

WORK EXPERIENCES:
1. COMPANY: Total Exploration & Production - Yemen
DEPARTMENT: Operation Maintenance & Inspection
POSITION: Sr. Electrical Engineer/Consultant
DATES: January 2007 - November 2007 (present)
COMPANY PROFILE:
TOTAL E & P (Exploration and Production) - YEMEN, is operating an onshore oil and gas at Block 10, East Shabwa, Hadramat Province. There are 2 Central Processing Unit, KHARIR and ATUF CPU. 44 Production Wells, 50 units of Caterpillar Diesel Generators, 30 VSD (Centrilift/WG) and 23 - Upcoming Production Well for 2007/2008.
Statistic: Oil Production(bopd)- 38,483, Water Production (bwpd)- 84,855, Water Injection (bwpd)- 93,070, Field BSW(%) - 69, Gas Injection (MMscfd) - 3.8, Flare Gas (MMscfd) - 17.2, Central Gas Compression Unit.

Duties and Responsibilities:
Overall Duty:
„« Administers the electrical construction and maintenance management programme in line with production plan and strategy adopted, to ensure that tasks undertaken are adequate to prevent unplanned equipment failure.
„« Supervise and implement and front end engineering design, review design requirements, prepare request for modification, prepare detailed scope of work, materials take off, cost estimate, raised purchase order in SAP (SALSA FORM), to ensure safe working environment, cost-effective and timely execution in accordance within TOTAL E&P standards, and specification (hazardous classification)
„« Analyzing detailed plan, provide technical procedures required by field operation and maintenance department.
„« Plan, prepare and allocate spare parts for the Diesel Generator major and top overhauling program including the MCC, Motors, Variable Speed Drive (VSD) and other plant utilities. Ensure and monitors implementation of above programs in liaison with the site teams (no backlog).
„« Facilities Factory Acceptance Test of Caterpillar Diesel Generator (Load Test) to ensure full compliance to technical specification. Wood Group Variable Speed Drive (VSD)
„« Provides support Electrical construction team for installation of DG, VSD,MCC, power and control cable hook-up, maintenance activities on site and assesses the quality of the site operations through regular audits and inspections. Makes recommendation to improve and optimise Electrical tasks.
„« Develops Electrical Maintenance and testing procedures and ensure that testing equipment has been certified is carried out.
„« Troubleshoots complex or recurring Electrical problems which require a Root Cause Failure Analysis (RCFA) and make recommendation for a better result with the help of vendors or original equipment manufacturers with a sound and cost effective solutions.
„« Identifies critical spare parts and ensure their availability in stock. Manages and optimises Electrical spare parts stock level (min /max and re-order label)
„« Performs cost analysis of Electrical activities and proposes solutions to reduce costs.
„« Participates to the preparation of the Maintenance budgets for the Electrical part.
A. Support to Maintenance & Production Activities:
„« Analyses shutdown reports and assists Site Electrical Maintenance teams for troubleshooting.
„« Ensures CMMS (Centrix- D7i) is up-dated following modifications and new projects, creates new equipment stocked items.
„« Ensures that all Electrical Maintenance activities are performed in compliance with HSE rules
„« Assists the Head of Maintenance and Inspection Method in the definition of modifications: review modifications requests from Production and Maintenance teams, prepares technical dossier.
„« Participates to equipment selection and Maintenance engineering of new projects.
„« Ensures that final documentation is adequate: operating and maintenance manuals, as-built drawings,
„« Ensures, in conjunction with Logistics and Procurement teams, that spare parts stock levels are adequate and maintained, and that materials/equipment received are within specifications.
„« Supervises 4 Electrical/VSD supervisor (back-back) and 8 technicians.
2. COMPANY: Parsons-Flour Daniel/Eurest Raytheon Support Services (PFD/ERSS)
POSITION: Electrical Engineer/Supervisor Facilities Maintenance
PROJECT: SGP/SGI Facilities - Republic of Kazakhstan
DATES: November 2004 - December 2006
Duties and Responsibilities:
„« To supervise the construction, erection and installation of all Electrical Equipment of 4 x 34 MVA Gas-Turbine Generator, Substation, High / Low Voltage Switchgears, Motors, Boilers, Compressors and power and lighting facilities.
„« To prepare perform pre-commissioning and commissioning activities procedure, assist electrical equipment testing base on the manufacturer recommendation. To carry out detailed engineering, prepares scope of work and technical evaluation for extra ordinary maintenance (EOM) and major maintenance (MM) activities according to ROK law and SNiP standard.
„« To work out repair of power equipment if necessary, to check and carry out preventive/corrective maintenance of 9 x 10 KV/ 0.4 KV Substation, Switchgear, 2 x 34 MVA gas turbine generator, Caterpillar Diesel Generator, Water Treatment Plant Facilities (WTP), Boiler, Pumping Station and Auxiliary facilities.
„« To supervise and coordinate all maintenance activities on electrical equipment, troubleshoot complex electrical problems and supervise senior electrical technician, technicians and contractor staff in the assign area. To supervise daily work activity, prepare plan preventive maintenance procedures, work schedule, attended work order request according to priority rating and material sourcing.
„« To approve work orders, general work permit, material requests and material withdrawal. To initiate spare part listing and established minimum, maximum and re-order material stock level material, raised material request to procurement, evaluate materials and insure within project specification standard, and make record for all equipment history profile.
„« Supervision responsibilities include onsite SAFETY audits, participate in NEAR MISS and SAFETY OBSERVATION programs, provide guidance to National Employee and review job package.
„« Supervise 4 Electrical Supervisor and 20 technicians

3. COMPANY: SINGLE BOUY MOORING INC.
POSITION: Senior Instrumentation/ Electrical Commissioning Technician
ADDRESS: SBM/MRS (Keppel Shipyard), Singapore
DATES: January 2004 - September 2004
PROJECT: Floating Production Storage and Offloading Vessel (FPSO) Oil and Gas
(Exxon Mobil Project)
Duties and Responsibilities
„« Responsible for the pre-commission and commissioning of all electrical equipment in top side, public address system and general alarm, telephone system, CCTV (NVSAT), Radar and marine radio (UHF / VHF) system, Gas turbine, electrical motors, Inert gas generator system (IGGS), motor control Center, and instrumentation equipment (Pressure Transmitter, Flow transmitter, MOV adjustment, Pressure switches and etc.) of Marlin Sul FPSO) and Yoho (FSO) Exxon Mobil Project Oil and Gas project.
„« Prepare bill of materials and insure all materials are complied with client specification.
„« Monitor contractor daily work accomplishment, provide test and commissioning work, evaluate and make recommendation. Assist operation team on-board of Marlin Sul FPSO while sailing to Brazil for plant start up activity.
„« Supervise 3 - 6 technician in project implementation

4. COMPANY: KBR/IMI
POSITION: Lead Electrical Commissioning Technician
ADDRESS: Chad, AFRICA
DATES: March 2003 - December 2003
PROJECT: TChad Development Project (Oil/Gas Gathering Station)
Reason of Leaving: Project Completion of Chad & Cameroon Development Project (ExxonMobil)
Duties and Responsibilities
„« Responsible for the pre-commission and commissioning of all 33/66 KV transformers, Merlin Gerin switchgears, gas turbine, air compressors, emergency fire pumps, oil export pumps motors, emulsion pumps motors, motor control center, well head power supply, instrumentation equipment (Pressure Transmitter, Flow transmitter, MOV adjustment, Pressure switches and etc.) and assist Vendor for pre-com and commissioning activities.
„« Supervise 6 electrical technicians
5. COMPANY: SAUDI ELECTRICITY COMPANY
POSITION: Electrical Specialist - 1
ADDRESS: Dammam, K.S.A.
DATES: July 2000 - October 2002
PROJECT: Operation & Maintenance
Duties and Responsibilities
„« Responsibilities include but not limited to supervise, direct and control of contractor during test and inspection of all electrical system for 4 x 400 MW Steam Turbine - Generator, Boilers, Force Draft Fan, Cooling Water Pump Motor, 4.180 KV Metal Clad Switchgear, UPS, Motor Control Center, (Forney- Burner Management System, Rotork Motorized Operated Valves and Plant Auxiliaries.
„« Performed the preventive and corrective maintenance, test and commissioned all plant electrical equipment, execute cable splicing and termination.
„« Diagnosed, trouble shoot and repaired defect on boiler burner management system (Forney and Siemens and Controls), field devices and logic control equipment base on the distributed control intelligence system (DCIS). Repair and overhaul electrical equipment in desalination and water treatment plant
„« Supervise 4 electrical technicians in project implementation

6. COMPANY: JURONG TECHNOLOGIES INDUSTRIAL CORP. PTE LTD.
POSITON: Project Electrical Engineer/On Board Guarantee Engineer
ADDRESS: SINGAPORE
DATES: March 1997 - January 1999
PROJECT: Kirana Pratama oil Tanker / oil and Gas Project
Duties and Responsibilities
„« In-charge of the construction, erection, installation of 3 x 850 KW diesel engine - generator, lubrication oil purifier, boiler, inert gas generator system, low voltage switchgear and control, Tank level alarm, Air compressor, fire alarm system, light and power, motors, cranes, mooring steering gears, cargo pumps, test and commissioning activities.To monitor daily work accomplishment, material and equipment schedules, to check and verify material used with in specified details on the construction drawing, inspects facilities and complete the work with quality standard.
„« Provide, develop and organized safe operation and maintenance procedure according to manufacturer standard.
„« Assist electrical officer during sea trials and ship sailing for 6 months at sea and collect equipment operational data for equipment warranty.
„« Supervise 3 - 12 technicians in project implementation.
7. COMPANY: SALINE WATER CONVERSION CORPORATION
POSITION: Power Station Electrical Foreman/Technician
ADDRESS: Al Jubail Power & Desalination Plant, Kingdom of Saudi Arabia
DATES: February 1986 - September 1996
PROJECT: Operation and Maintenance
Duties and Responsibilities:
Power Station (12 x 130 MW Steam Turbine -Generator)
(2 x 35 MW Gas Turbine-Generator)
(20MGD Desalination Plant)
„« In-charge in the construction, erection, test and commissioning of all electrical equipment and apparatus such as 12 x 150 MVA, 13.8/230 KV Italtrafo Main Transformer and 75 MVA Auxiliary Transformer, 230 KV Gas Insulated Switchgears, 7.2 KV Metal Clad Switchgears, Circuit breaker, Motor Control Center, Power center, Induction Motors, Cooling and Lubrication System, Oil Purifiers and Interlocking of electrical apparatus and Programmable Logic Controller devices.
„« Supervise repair, assist technician for servicing of on-load tap changer, un-interrupted power system (Inverter/Rectifier), Storage batteries, Oil Filtration on Transformers.
„« Checked, inspect and assist plant start-up, identify defect, trouble shoot and repair defective circuit if their any.Provide technical support to electrical technician, established program for preventive and corrective maintenance.
„« Monitor daily work accomplishment, collect, distribute work order and suspend after work completion.
„« Plant to ensure that all electrical equipment and apparatus are operational.
„« Supervise 12 electrical technician

8. COMPANY: ENGINEERING AND CONTRUCTION CORPORATION OF ASIA
POSITION: Senior Project Electrical Engineer
ADDRESS: Philippines
DATES: January 1982 - January 1986
PROJECT: 112.5 MW Palimpinon Geothermal Plants
12.5 MW Angat Hydro Electric Plants
Duties and responsibilities
„« Supervise in the construction, erection, installation. Test and commissioning of electrical equipment and apparatus of 112.5 MW Palimpinon Power Plant and 12.5 MW Angat Hyro Electric Plant.
„« Prepare as built and detailed drawing, provide electrical design on additional electrical work, responsible for the quality control, punch list, and monitor daily work accomplishment.

TRAINING S AND SEMINARS ATTENDED:
„« Calibration for Process Instrumentation
„« Basic Programmable Logic Controller
„« Computer Aided Construction Project Management (P3) Project Planner Ver. 4.0
„« Auto Cad for Professional ver. 13.0
„« Institute of Occupational Safety and Health Management (IOSH)
„« First Aid Training conducted by SOS
„« CMMS MetaFrame XP Datastream 7i Citrix
„« SAP program
„« Computer literate MS Office Word, MS Office Excel
„« Essential of First Aid -(SOS)
„« Survival of Life at Sea (SOLAS)

PERSONAL DATA:
DATE OF BIRTH: 10 NOVEMBER 1958
MARITAL STATUS: Single
PASSPORT NUMBER: NN 0484198
PLACE OF ISSUED: Singapore
VALID UNTIL: June 2009
NATIONALITY: FILIPINO

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6541)

Go to Search Parameters...

Brief Description

PROJECT, INSTALLATION, COMMISSIONING, MAINTENANCE OF INSTRUMENTATION AND CONTROL SYSTEM

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Instrument / Controlsystems Engineer

Extensive knowledge in control system design for industrial applications specially with ABB and YOKOGAWA DCS systems ,software design and software programming with C, C++,Visual C# and Visual Basic .

Geologist geophysicist interpretation

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Almost 18yrs experience in oil & gas company (CAD/INtools Administrator

A highly focused, enthusiastic and innovative Petrophysicist, with almost 18 years practical work experience in the Oil & Gas industry, both with a major service provider (Schlumberger) and major Oil & Gas producing companies (Qatar Petroleum, Zadco, Rasgas, Shell). Determined and results oriented.

Seventeen years of combined experience of Operation and Technical support to maintenance unit as reliability engineer in safety dominated Nuclear Power Plant. Where safety is the utmost goal beside operation of the plant and production. Extensive experience in reliability centered maintenance

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Chief Metallurgist

Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Int Offshore Survival Certification.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out