Resume - More than 30 years experience in corrosion protection

Misco Jobs

Resume #65202

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Shipbuilding technician - finish 1976 - Shipbuilding Technical School Centre in Rijeka, Croatia
I have more than 30 years experience in corrosion protection and qualification on the all jobs in corrosion protection.
Finished Training course in company Hodge Clemco in place Sheffield in England date 18-21 March 2003.
--------------

OBJECTIVE:
------------
I expecting from the job, good salary and other good work conditions. I working before in desert in Libya in the campss and for my this is not problem, my love its natural desert.
------------

WORK EXPERIENCE:
------------
from December 2001 to present:
Executive of plan and analyses in company Teri-Crotek Ltd. Rijeka, Croatia
Responsible for planning and analysis production in company (5 sites in ship newbuilding. Working acording quality system ISO 9001:2000, we have the Certification from BVQI No. 100536

from June 2001 to December 2001:
Manager for Russia in company Teri-Crotek Ltd. Rijeka, Croatia, Subcontractor of company Amerco-International. Job is completed for client russian company Transneft
Responsible for cordination of work and job planning of corosive protection work and settings up Lining on the bottom of tank inside with Amercoat 2209 – Ameron (now PPG) (45.000 sqm) in the Russia on work sites Primorsk - Kirishi- Yaroslav with total 130 workers on all three work sites.

from October 1996 to June 2001:
Executive sales departments for the corrosive protection in company Teri-Crotek Ltd. Rijeka, Croatia (the bigest company for corrosion protection in Croatia by number of workers and equipment for work).
Responsible for negotiation, calculating the prices, planning and production according to all work sites in company (5 sites, with total 450 workers).

from January 1996 to October 1996:
QA/QC for corrosive protection on the Project No. 213 508 Rasco, Phase II for Libyan company Rasco in town Ras Lanuf for company Man Gutehoffnungshutte ag, PostfahH: 1253,
Ginsheimer – Gustavasburg, germany.
Corrosive protections Pipelines in the Libya "Phase II", the work was for the company
Montmontaza Zagreb, Croatian, as the subcontractor for germany company Man Ferrostaal ag.

from June 1995 to December 1995:
Executive sites for corrosive protection for company Jadrankolor Ltd.-Rijeka, Croatia, subcontractor for company Amerco group Wien, Austria.
Responsible for corrosive protection on industrial plant of warehouse steeps of crude oil for russian company Yukos-Yuganskneftegaz work site Nefteyugansk West Siberia, Rusia, on blasting and coat applications, and laying down epoxy laminat manufactured Amercoat 2209- Ameron (now PPG) on inside tank bottom (14.000 sqm).

from May 1994 to June 1995:
Main technologist in commercial department in company Jadrankolor Ltd.-Rijeka, Croatia, company for corrosion protection and chemical tretmans.

from March 1992 to May 1994:
Executive sites for corrosive protection in company Montmontaža - Libyan Branch, Zagreb, Croatia.
Responsible during work on the projects:
LPG – Floating storage and pipelines in main yeti in place of Mars el Brega in Libya,
Tank for Crude Oil T-2 in place Raguba (desert site 500 km to coast) in Libya and other work according to contract for company Sirte Oil Company in place Marsa el Brega in Libya. Also work according to contracts for company Rasco Gas and Oil Procesing Industry in place moldboard Lanuf in Libya.

from October 1986 to March 1992:
Executive of technical preparation and maintenance equipment during going for a ride work corrosive protect in company Jadrankolor Ltd.-Rijeka, Croatia.
Responsible for maintenance all equipment with which go out work corrosion protection on work sites chemical industries Ina - Rafinery Rijeka in town Rijeka, Croatia, DIOKI petrochemical complex island Krk, JANAF - chemical tanks farm with two jettyes.
Shipyards 3.MAJ Rijeka, Maintenence shipyard Viktor Lenac Rijeka.

from Septembar 1985 to October 1986:
Executive of technical preparation and maintenance equipment during going for a ride work corrosive protect in company Jadrankolor Ltd.-Rijeka, Croatia, subcontractor company INGRA - Montmontaza,
Department for welding in Zagreb. Responsible for corrosion protection on Project Industial blastings and painting plants Zelten - Raguba - Hateiba - Attahaby - GOSP's and Gas Plant (450 km to coast) in Libya for company Sirte Oil Company from place of Marsa el Brega in Libya (protecting 50.000 m2 with 50 workers)

from October 1981 to Septembar 1985:
Commercial officer in company Jadrankolor Ltd.-Rijeka, Croatia.
Responsible for technical preparation, planing and analysis of corrosion protective work and also for calculation of offered work towards inquiries of ordered work in anticorrosive protections.

from August 1976 to October 1981:
Main manager for site 3.MAJ in company Jardankolor Ltd. - Rijeka, Croatia.
Responsible for anticorrosive protection on work site shipyards 3.Maj in town Rijeka
(4 Foremans with 150 workers).
------------

EDUCATION & CERTIFICATION:
------------
Finished Training course in company Hodge Clemco in place Sheffield in England date 18-21 March 2003.
Shipbuilding technician, graduated at Technical Shipbuilding school in Rijeka,Croatia.
------------

ADDITIONAL INFORMATION:
------------
In all of these in my CV, I was involved in surface preparation, tehnology, application methods and various by operation (scaffolding, ventilation, lighting, recovery of abrasive and energy distribution).
Being engaged in organizing tehnologicaly, labour and set up for major projects as chemical tankers, product carriers, maintance painting of vessels in dry docks, new industrial plants and ect....
Also, working with world leading paint manufacturers – JOTUN, HEMPEL, INTERNATIONAL,
SIGMA, AMERON (now PPG), DEVOE, CHUGOKU, KANSAI with range of products from these manufacturers.
As my job duties include permanent contact with coating inspection team from various manufacturers and leading internal QC. I became familiar with relevant international recognized standarDS for control of prepareed surface to acording ISO 8501-1, ISO 8501-2, ISO 8501-3, ISO 8501-4, and also standard SSPC PA2 for measureing of dry film coat (DFT) and im familiar to all instruments from the manufacturer Elcometer, Electro-phhysik and other manufactureres.
------------
Language skills: Technical English, Russian in the field for corrosion protection and quality control. Communication experience with expatriate specialists.
Computer skills: User of all Microsoft Office Tools and Internet.
Driving license: Category B - 20 years of driving experience in normal rooads and 5 years in desert rooads in Libya.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 6742)

Go to Search Parameters...

Brief Description

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Petrophysicist (Senior Geoscientist) with almost 7 years experience, Skills: Log Analysis and interpretation (Cased Hole/Open Hole) Integrated core and log data analysis, petrophysical moddeling, reserves evaluation, base knowledge of seismic interpretaion

Firoz Khan, A NACE CP Level 2 , have had a great deal of corrosion / Cathodic Protection experience in Pipelines, Above/Under ground storage tanks, Jetty & Offshore Structure. Have done a lot of CP Surveys also.

I have M.Sc. in Mechanical Engineering and as a Piping Engineer I have 7 years experience both in design and construction phases of oil, gas and petrochemical projects led by International firms like TECHNIP and LINDE.

My career ambition is to be working for a firm that allows me to work with Electrical Power Generation, High Voltage/Low Voltage Power Supply Systems, Sub-stations, Distribution, Transmission Lines, Protection and Metering Scheme Design, Installation, Testing, Modification and Maintenance. Qualific

I am a Civil/Structural Engineer with more than 7 years of work experience in various fields such as Oil & Gas, Power & Infrastructure.

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

I am a Diploma holder in Electrical Engineering. I worked 8 years in Indian Engineering Companies as Engineer. Later i started my career in Oil and Gas Industry. I am capable of serving the position as Electrical Maintenance Supervisor / Foreman. Now i am working in Sudan.

More than 30 years experience in corrosion protection

Surveyor working with Lloyd's Register Asia

Exprience in Honeywell Systems,Zyton,Qualitronics,Syris,Diginet. Skilled in all fire systems and BMS.

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

I am a Mechanical Project Executives around 7-1/2 years of experience in the field of Project management, Construction of Offshore structures & pipelines, Oil & Gas, and mechanical structures

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

NDE Project Manager, III Ultrasonics ASNT/ACCP/EN473, Phased Array, TOFD, API 510 (lapsed), CWI (lapsed)

Results-oriented Petroleum Engineer with 17 years experience in the International Oil Industry with an in-depth technical appreciation of production practices.

Canadian Citizenship, twenty-year work experience in the oil/gas and mining industry with very strong skills in geology and geophysics, reservoir management, Development and Production and production engineering. Very proficient in computer software applications for resources estimation, project eva

Piping &pressure vessel design

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Free! M.Sc Petroleum Engineering, 28 years experience as Drilling Fluids/Mud Engineer and Reservoir Engineer

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

Rotating Equipment Supervisor

IT/PC Technician

Seimec mechanic

Offshore design and project management

Safety Technician offshore/oil and gas.

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Oil & Gas production optimization, Artificial Lifting, Workover, Completion, Nodal Analysis, Stimulation, Simulations.

More than 10 year’s progressive experiences in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Pipeline Coating, Pipelines Installation (Offshore) Platform Modification (Offshore) Refinery and Pressure Vess

i am a chemical engineer and i have a diploma in petroleum industrilization engineering.my expeierence concerning in oil and gas services such as well-testing, wellhead maintenance, pressure vessels inspection, tanks desludge and cleaning operations, well testing equipments modifications...

Material Controller

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out